Articles 2023 | Procédés et Ingénierie en Mécanique et Matériaux

Ahmadifar M., Shirinbayan M., Benfriha K. Investigation of the impact of the short fiber reinforcements on the thermal and mechanical properties of polymer-based composites manufactured by material extrusion (2023) International Journal of Advanced Manufacturing Technology, 127 (7-8), pp. 3801 - 3817 https://sam.ensam.eu/handle/10985/24749 - https://hal.science/hal-04199047v1

Ahmadifar M., Benfriha K., Shirinbayan M. Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF) (2023) Polymers, 15 (3), art. no. 507 //sam.ensam.eu/handle/10985/23270 - https://hal.science/hal-03969292v1

Arquier R., Miquelard-Garnier G., Iliopoulos I., Régnier G. Assessing the shear viscous behavior of continuous carbon fiber reinforced PEKK composites with squeeze flow measurements (2023) Polymer Testing, 123, art. no. 108060 https://sam.ensam.eu/handle/10985/24941 - https://hal.science/hal-04145537/document

Ayad M., Ünaldi S., Scius-Bertrand M., Le Bras C., Fayolle B., Berthe L. Dynamical modeling of bi-layer Aluminium adhesive tape for laser shock applications (2023) Optics and Laser Technology, 163, art. no. 6 https://hal.science/hal-04097265v1

Bao J., Heyd R., Régnier G., Ammar A., Peixinho J. Viscosity of graphene in lubricating oil, ethylene glycol and glycerol (2023) Journal of Thermal Analysis and Calorimetry, 148 (21), pp. 11455 - 11465 https://doi.org/10.1007/s10973-023-12498-2

Belkhiria S., Seddik R., Hamdi A., Fathallah R. FE and probabilistic analysis for rubber life estimation considering cracking energy density as a fatigue predictor (2023) Polymers and Polymer Composites, 31 https://doi.org/10.1177/09673911231202377

Boutoux G., Chevalier J.-M., Arrigoni M., Berthe L., Beuton R., Bicrel B., Galtié A., Hébert D., Le Clanche J., Loillier S., Loison D., Maury P., Raffray Y., Videau L. Experimental evidence of shock wave measurements with low-velocity (<100 m s-1) and fast dynamics (<10 ns) capabilities using a coupled photonic Doppler velocimetry (PDV) and triature velocity interferometer system for any reflector (VISAR) diagnostic (2023) Review of Scientific Instruments, 94 (3), art. no. 033905 https://doi.org/10.1063/5.0107499

Bouvier D., Rébillat M., Monteiro E., Mechbal N. A spatio-temporal nonlinear semi-analytical framework describing longitudinal waves propagation in damaged structures based on Green–Volterra formalism 2023) Mechanical Systems and Signal Processing, 189, art. no. 110048 https://sam.ensam.eu/handle/10985/23689 - https://hal.science/hal-04072726v1

Brot G., Koutiri I., Bonnand V., Favier V., Dupuy C., Ranc N., Aimedieu P., Lefebvre F., Hauteville R. Microstructure and defect sensitivities in the very high-cycle fatigue response of Laser Powder Bed Fused Ti–6Al–4V (2023) International Journal of Fatigue, 174, art. no. 107710 https://sam.ensam.eu/handle/10985/24735 - https://hal.science/hal-04145858v1

Chebil G., Bettebghor D., Renollet Y., Lapouge P., Davoine C., Thomas M., Favier V., Schneider M. Deep learning object detection for optical monitoring of spatters in L-PBF (2023) Journal of Materials Processing Technology, 319, art. no. 118063
1 https://doi.org/0.1016/j.jmatprotec.2023.118063

Chebil M.S., Gerard P., Issard H., Richaud E. Thermal stability of polymethacrylic based ELIUM® resin: Effect of comonomers, antioxidants and aluminum trihydrate filler (2023) Polymer Degradation and Stability, 213, art. no. 110367 https://sam.ensam.eu/handle/10985/24629 - https://hal.science/hal-04145898v1

Chevalier X., Pound-Lana G., Gomes Correia C., Cavalaglio S., Cabannes-Boué B., Restagno F., Miquelard-Garnier G., Roland S., Navarro C., Fleury G., Zelsmann M. Self-organization and dewetting kinetics in sub-10 nm diblock copolymer line/space lithography (2023) Nanotechnology, 34 (17), art. no. 175602 https://doi.org/10.1088/1361-6528/acb49f
https://hal.science/hal-04097265v1

Chicaud M., Corrales M., Kutchukian S., Solano C., Candela L., Doizi S., Traxer O., Panthier F. Thulium:YAG laser: a good compromise between holmium:YAG and thulium fiber laser for endoscopic lithotripsy? A narrative review (2023) World Journal of Urology, 41 (12), pp. 3437 - 3447 https://doi.org/10.1007/s00345-023-04679-3

Chinesta F., Cueto E. Conciliating accuracy and efficiency to empower engineering based on performance: a short journey (2023) Comptes Rendus - Mecanique, 351
https://doi.org/10.5802/crmeca.188

Chinesta F., Cordero A., Garrido N., Torregrosa J.R., Triguero-Navarro P. Simultaneous roots for vectorial problems (2023) Computational and Applied Mathematics, 42 (5), art. no. 227 https://doi.org/10.1007/s40314-023-02366-y
https://hal.science/hal-04141252v1

Clement A., Auger T. An EAM potential for α-brass copper-zinc alloys: application to plasticity and fracture (2023) Modelling and Simulation in Materials Science and Engineering, 31 (1), art. no. 015004 https://doi.org/10.1088/1361-651X/aca4ec

Cordier P., Gouriet K., Weidner T., Van Orman J., Castelnau O., Jackson J.M., Carrez P. Periclase deforms more slowly than bridgmanite under mantle conditions (2023) Nature, 613 (7943), pp. 303 – 307 https://doi.org/10.1038/s41586-022-05410-9

Costa J.P.M., Jumel J. Influence of adhesive rheological behavior on stable mode II crack propagation in bonded interface subjected to shear loading condition (2023) Mechanics of Advanced Materials and Structures, https://doi.org/10.1080/15376494.2023.2237502

Crespi A.E., Nordet G., Peyre P., Ballage C., Hugon M.-C., Chapon P., Minea T. The Use of Sacrificial Graphite-like Coating to Improve Fusion Efficiency of Copper in Selective Laser Melting (2023) Materials, 16 (6), art. no. 2460
https://sam.ensam.eu/handle/10985/24736 - https://hal.science/hal-04161619v1

Delacroix T., Lomello F., Schuster F., Maskrot H., Jacquier V., Lapouge P., Coste F., Garandet J.-P. Measurement of powder bed oxygen content by image analysis in laser powder bed fusion (2023) Materials and Design, 226, art. no. 111667 - https://sam.ensam.eu/handle/10985/24604 - https://hal.science/hal-04164507v1

Delannoy R., Quélennec B., Tognetti V., Delbreilh L., Delpouve N., Richaud E. Glass and sub-glass relaxation changes induced by thermal ageing of epoxy-amine polymer networks – A DMA study (2023) Polymer Degradation and Stability, 216, art. no. 110487
https://sam.ensam.eu/handle/10985/24603 + https://hal.science/hal-04271921v1

Dmochowska A., Peixinho J., Sollogoub C., Miquelard-Garnier G. Extensional Viscosity of Immiscible Polymer Multi-Nanolayer Films: Signature of the Interphase (2023) Macromolecules, 56 (16), pp. 6222 - 6231.

https://sam.ensam.eu/handle/10985/2473. https://hal.science/hal-04182122v1

Ferrándiz B., Daoud M., Kohout N., Chinesta F. Prediction of cross-sectional features of SPR joints based on the punch force-displacement curve using machine learning (2023) International Journal of Advanced Manufacturing Technology, 128 (9-10), pp. 4023 - 4034
https://doi.org/10.1007/s00170-023-12102-9

Fournet-Fayard L., Cayron C., Koutiri I., Lapouge P., Guy J., Dupuy C., Obaton A.-F. Thermal analysis of parts produced by L-PBF and correlation with dimensional accuracy (2023) Welding in the World, 67 (4), pp. 845 - 858 https://sam.ensam.eu/handle/10985/24602 - https://hal.science/hal-04066013v1

Frija M., Ayeb M., Seddik R., Fathallah R. Reliability prediction of high-cycle fatigue behavior of parts treated by laser shock peening (2023) Fatigue and Fracture of Engineering Materials and Structures, 46 (9), pp. 3514 – 3529 https://doi.org/10.1111/ffe.14091

Garois S., Daoud M., Traidi K., Chinesta F. Artificial intelligence modeling of induction contour hardening of 300M steel bar and C45 steel spur-gear (2023) International Journal of Material Forming, 16 (3), art. no. 26 https://sam.ensam.eu/handle/10985/24790 - https://hal.science/hal-04086758v1

Garois S., Daoud M., Chinesta F. Explaining hardness modeling with XAI of C45 steel spur-gear induction hardening (2023) International Journal of Material Forming, 16 (5), art. no. 57
https://doi.org/10.1007/s12289-023-01780-1

Gbekou F.K., Boudenne A., Eddhahak A., Benzarti K. Mechanical and thermal properties of cement mortar composites incorporating micronized miscanthus fibers (2023) Journal of Materials Research and Technology, 26, pp. 7649 - 7664 https://sam.ensam.eu/handle/10985/24731

https://hal.science/hal-04216291v1

Ghnatios C., Kestelyn X., Denis G., Champaney V., Chinesta F. Learning Data-Driven Stable Corrections of Dynamical Systems—Application to the Simulation of the Top-Oil Temperature Evolution of a Power Transformer (2023) Energies, 16 (15), art. no. 5790
https://doi.org/10.3390/en16155790

Ghnatios C., Jiang D., Tourbier Y., Cimetière A., Chinesta F. Data-Completion and Model Correction by Means of Evanescent Regularization (2023) Applied Sciences (Switzerland), 13 (17), art. no. 9616 https://doi.org/10.3390/app13179616

Gomez-Omella M., Flores J., Sierra B., Ferreiro S., Hascoët N., Chinesta F. Optimizing porosity detection in wire laser metal deposition processes through data-driven AI classification techniques (2023) Engineering Failure Analysis, 152, art. no. 107464
https://doi.org/10.1016/j.engfailanal.2023.107464

Guilhaumon C., Arias J., Rodriguez-Sevillano Á.A., Saucedo-Mora L., Montans F. Biologically-inspired aerodynamic shape optimization for low Reynolds regimes(2023) Results in Engineering, 20, art. no. 101442, https://doi.org/10.1016/j.rineng.2023.101442

Guliyeva A., Pung H., Tencé-Girault S., Rébillat M., Serghei A., Gervais M., Sollogoub C., Roland S. Improvement of the self-assembly of low χ ABA triblock copolymers with the addition of an ionic liquid(2023) Polymer International, 72 (3), pp. 356 - 365, https://doi.org/10.1002/pi.6476

Guo S., Rébillat M., Liu Y., Li Q., Lu C., Mechbal N. Guided waves propagation in arbitrarily stacked composite laminates: Between-layers incompatibility issue resolution using hybrid matrix strategy (2023) Composite Structures, 322, art. no. 117360, - https://sam.ensam.eu/handle/10985/24121 - https://hal.science/hal-04197327v1

Haddadi H., Tran H.-S., Franciosi P. Use of Digital Image Correlation (DIC) to Improve the Critical Strain-Annealing (CSA) Method for Producing Large Crystals: Application to A1050 Commercially Pure Aluminum (2023) Crystals, 13 (6), art. no. 923, https://doi.org/10.3390/cryst13060923

Hebrard L., Buffiere J.-Y., Palin-Luc T., Ranc N., Majkut M., King A., Weck A. Environment effect on internal fatigue crack propagation studied with in-situ X-ray microtomography (2023) Materials Science and Engineering: A, 882, art. no. 145462
- https://sam.ensam.eu/handle/10985/24733 - https://hal.science/hal-04274992v1

Hernández Q., Badías A., Chinesta F., Cueto E. Port-metriplectic neural networks: thermodynamics-informed machine learning of complex physical systems (2023) Computational Mechanics, 72 (3), pp. 553 – 561 https://sam.ensam.eu/handle/10985/24724 - https://hal.science/hal-04163352v1

Hernández Q., Badías A., Chinesta F., Cueto E. Thermodynamics-informed neural networks for physically realistic mixed reality (2023) Computer Methods in Applied Mechanics and Engineering, 407, art. no. 115912, https://doi.org/10.1016/j.cma.2023.115912

Jacot M., Champaney V., Chinesta F., Cortial J. Parametric Damage Mechanics Empowering Structural Health Monitoring of 3D Woven Composites (2023) Sensors, 23 (4), art. no. 1946, https://sam.ensam.eu/handle/10985/24737 - https://hal.science/hal-04163603v1

Jiang J., Wu J., Chen Q., Chatzigeorgiou G., Meraghni F. Physically informed deep homogenization neural network for unidirectional multiphase/multi-inclusion thermoconductive composites (2023) Computer Methods in Applied Mechanics and Engineering, 409, art. no. 115972 https://sam.ensam.eu/handle/10985/23502 - https://hal.science/hal-04037434v1

Kadri R., Nait Abdelaziz M., Fayolle B., Ayoub G., Hassine M.B., Nziakou Y. Micromechanical based model for predicting aged rubber fracture properties (2023) International Journal of Fracture, 243 (2), pp. 125 - 142
https://doi.org/10.1007/s10704-023-00730-x

Kazemzadeh-Parsi M.-J., Pasquale A., Di Lorenzo D., Champaney V., Ammar A., Chinesta F. NURBS-based shape parametrization enabling PGD-based space separability: Methodology and application (2023) Finite Elements in Analysis and Design, 227, art. no. 104022 https://doi.org/10.1016/j.finel.2023.104022

Kazemzadeh-Parsi M.-J., Ammar A., Chinesta F. : A Proper Generalized Decomposition Approach (2023) Materials, 16 (4), art. no. 1753 https://doi.org/10.3390/ma16041753
https://hal.science/hal-03790834v2

https://www.mdpi.com/1996-1944/16/4/1753 - https://sam.ensam.eu/handle/10985/24728 - https://hal.science/hal-04163627v1

https://hal.science/hal-03790834v2

Kormpos P., Unaldi S., Berthe L., Tserpes K. A Laser Shock-Based Disassembly Process for Adhesively Bonded Ti/CFRP Parts (2023) Processes, 11 (2), art. no. 506µ
https://doi.org/10.3390/pr11020506
https://hal.science/hal-04072714v1

Kromer R., Gorny C., Gruhier E., Le Guen E., Arvieu C., Lacoste E. Absorptivity measurement of solid and powder bed under IR laser beam (2023) Optics and Laser Technology, 157, art. no. 108508 https://sam.ensam.eu/handle/10985/23366 - https://hal.science/hal-03997640v1

Lapostolle L., Morin L., Derrien K., Berthe L., Castelnau O. Modeling and simulation of laser shock waves in elasto-plastic polycrystalline microstructures (2023) Journal of the Mechanics and Physics of Solids, 176, art. no. 105310 https://sam.ensam.eu/handle/10985/24738 - https://hal.science/hal-04324976v1

Lapostolle L., Morin L., Derrien K., Berthe L., Castelnau O. Fast numerical estimation of residual stresses induced by laser shock peening (2023) European Journal of Mechanics, A/Solids, 97, art. no. 104844 https://sam.ensam.eu/handle/10985/23050 - . https://hal.science/hal-03899983v1

Lapostolle L., Morin L., Derrien K., Berthe L., Castelnau O. Exact expressions of the uniaxial perfectly elasto-plastic stress wave and induced mechanical fields in the case of a finite impact: application to laser shock peening (2023) Comptes Rendus - Mecanique, 351, pp. 458 https://hal.science/hal-04325002v1

Lapouge P., Hayrant N., Coste F. Impact of the beam shape and process parameters on bead geometry in WLAM (2023) Additive Manufacturing Letters, 7, art. no. 100180
https://doi.org/10.1016/j.addlet.2023.100180

Le Duigou A., Grabow M., Castro M., Toumi R., Ueda M., Matsuzaki R., Hirano Y., Dirrenberger J., Scarpa F., D'Elia R., Labstie K., Lafont U.Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer (2023) Heliyon, 9 (3), art. no. e13581 https://sam.ensam.eu/handle/10985/23581 - https://hal.science/hal-03991012v1

Ledoux E.E., Saki M., Gay J.P., Krug M., Castelnau O., Zhou W.-Y., Zhang J.S., Chantel J., Hilairet N., Bykov M., Bykova E., Aprilis G., Svitlyk V., Garbarino G., Sanchez-Valle C., Thomas C., Speziale S., Merkel S. Deformation Mechanisms, Microstructures, and Seismic Anisotropy of Wadsleyite in the Earth's Transition Zone (2023) Geochemistry, Geophysics, Geosystems, 24 (11), art. no. e2023GC011026 /handle/10985/24739 - https://hal.science/hal-04288703v1

Le Goupil F., Kallitsis K., Tencé-Girault S., Brochon C., Cloutet E., Fleury G., Hadziioannou G. Double-Bond-induced Morphotropic Phase Boundary leads to Enhanced Electrocaloric Effect in VDF-Based Polymer Flexible Devices (2023) ACS Applied Energy Materials, 6 (24), pp. 12172 - 12179, https://doi.org/10.1021/acsaem.3c02804

Lugli A., Apchain E., Richaud E. Macromolecular changes of vinyl ester resin after thermal oxidation(2023) Applied Research, 2 (5), art. no. e202200115, https://doi.org/10.1002/appl.202200115

Lottier S., Tencé-Girault S., Gervat L., Saintier N., Miquelard-Garnier G., Fayolle B. Effect of chemical ageing on fatigue life of short glass fiber-reinforced Polyamide 6,6 (2023) Polymer Degradation and Stability, 208, art. no. 110244, https://doi.org/10.1016/j.polymdegradstab.2022.110244

Louhichi M.A., Poulachon G., Lorong P., Outeiro J., Monteiro E., Cotton D. Modeling and validation of residual stresses induced by heat treatment of AA 7075-T6 samples toward the prediction of part distortion (2023) Machining Science and Technology, 27 (3), pp. 247 - 267
https://doi.org/10.1080/10910344.2023.2215309

Lottier S., Tencé-Girault S., Gervat L., Saintier N., Miquelard-Garnier G., Fayolle B. Effect of chemical ageing on fatigue life of short glass fiber-reinforced Polyamide 6,6 (2023) Polymer Degradation and Stability, 208, art. no. 110244 https://doi.org/10.1016/j.polymdegradstab.2022.110244

Marciszko-Wiąckowska M., Baczmański A., Braham C., Wątroba M., Wroński S., Wawszczak R., Gonzalez G., Kot P., Klaus M., Genzel C. Stress evolution in plastically deformed austenitic and ferritic steels determined using angle- and energy-dispersive diffraction (2023) Materials Characterization, 203, art. no. 113114 https://hal.science/hal-04187295v1

Marquez Costa J.P., Jumel J. Theoretical analysis of self-similar crack propagation along viscoelastic and elasto–viscoplastic interface in a double cantilever beam test (2023) International Journal of Fracture, 241 (2), pp. 233 - 249 https://sam.ensam.eu/handle/10985/24

Mayi Y.A., Dal M., Peyre P., Bellet M., Fabbro R. Physical mechanisms of conduction-to-keyhole transition in laser welding and additive manufacturing processes (2023) Optics and Laser Technology, 158, art. no. 108811 https://sam.ensam.eu/handle/10985/24796 - https://hal.science/hal-04094265v1

Makki M., Ayoub G., Lee C.W., Bae C., Colin X. Effect of battery fast cyclic charging on the mechanical and fracture behavior of the lithium-ion battery separator (2023) Polymer Degradation and Stability, 216, art. no. 110469 https://doi.org/10.1016/j.polymdegradstab.2023.110469

Moya B., Badias A., Gonzalez D., Chinesta F., Cueto E. Physics Perception in Sloshing Scenes With Guaranteed Thermodynamic Consistency (2023) IEEE Transactions on Pattern Analysis and Machine Intelligence, 45 (2), pp. 2136 - 2150 https://doi.org/10.1109/TPAMI.2022.3160100
https://hal.science/hal-04094265v1

Moya B., Badías A., González D., Chinesta F., Cueto E. A thermodynamics-informed active learning approach to perception and reasoning about fluids (2023) Computational Mechanics, 72 (3), pp. 577 - 591 https://doi.org/10.1007/s00466-023-02279-x - https://sam.ensam.eu/handle/10985/24727 - https://hal.science/hal-04086391v1

Muñoz D., Allix O., Chinesta F., Ródenas J.J., Nadal E. topological descriptors (2023) Computer Methods in Applied Mechanics and Engineering, 405, art. no. 115859
https://doi.org/10.1016/j.cma.2022.115859 - https://sam.ensam.eu/handle/10985/24632 https://hal.science/hal-04093989v1

Pasquale A., Rodriguez S., Nguyen K., Ammar A., Chinesta F. A time multiscale decomposition in cyclic elasto-plasticity (2023) Computers and Mathematics with Applications, 149, pp. 75 - 83
https://doi.org/0.1016/j.camwa.2023.08.018

Peyrottes A., Chicad M., Fourniol C., Doizi S., Timsit M.-O., Méjean A., Yonneau L., Lebret T., Audenet F., Traxer O., Panthier F. Clinical Reproducibility of the Stone Volume Measurement: A “Kidney Stone Calculator” Study (2023) Journal of Clinical Medicine, 12 (19), art. no. 6274
https://doi.org/10.3390/jcm12196274

https://sam.ensam.eu/handle/10985/23690 - https://hal.science/hal-04083361v1

Praniewicz M., Fournet-Fayard L., Fox J.C., Cayron C., Koutiri I., Obaton A.-F. earing area curve based partitioning for the verification of theoretical supplemental geometry on additively manufactured lattice structures (2023) Additive Manufacturing, 68, art. no. 103521
https://sam.ensam.eu/handle/10985/24792 - https://hal.science/hal-04088263v1

Pereira M., Zirak N., Shirinbayan M., Zywica G., Tcharkhtchi A. Design, fabrication, and evaluation of a small turbine blade manufactured by rotational molding (2023) International Journal of Advanced Manufacturing Technology, 128 (7-8), pp. 3441 - 3450
https://doi.org/10.1007/s00170-023-12136-z
https://hal.science/hal-04083361v1

Quelennec B., Duan Z., Delannoy R., Gay N., Briffaut M., Tognetti V., Delpouve N., Delbreilh L., Bredif L., Duthoit A., Richaud E. Effect of physical and chemical ageing on barrier properties of epoxy coating (2023) Construction and Building Materials, 409, art. no. 133908
https://doi.org/10.1016/j.conbuildmat.2023.133908
https://hal.science/hal-04077208

Raffray Y., Jodar B., Sangleboeuf J.-C., Benuzzi-Mounaix A., Vinci T., Berthe L., Lescoute E., Barraud E., Brambrink E., Daudin R., Blandin J.-J., Loison D. Zr-based metallic glasses Hugoniot under laser shock compression and spall strength evolution with the strain rate (> 107 s-1) (2023) International Journal of Impact Engineering, 181, art. no. 104755
https://doi.org/10.1016/j.ijimpeng.2023.104755

Rodriguez S., Monteiro E., Mechbal N., Rebillat M., Chinesta F. Hybrid twin of RTM process at the scarce data limit (2023) International Journal of Material Forming, 16 (4), art. no. 40 https://doi.org/10.1007/s12289-023-01747

Runacher A., Kazemzadeh-Parsi M.-J., Di Lorenzo D., Champaney V., Hascoet N., Ammar A., Chinesta F. Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion (2023) Polymers, 15 (6), art. no. 1449 https://doi.org/10.3390/polym15061449 - . https://sam.ensam.eu/handle/10985/24797 - https://hal.science/hal-04093566v1

Sancarlos A., Champaney V., Cueto E., Chinesta F. Regularized regressions for parametric models based on separated representations (2023) Advanced Modeling and Simulation in Engineering Sciences, 10 (1), art. no. 4 https://doi.org/10.1186/s40323-023-00240-4
https://hal.science/hal-04163203v1

Schmid A., Pasquale A., Ellersdorfer C., Ziane M., Raffler M., Champaney V., Feist F., Chinesta F. a reduced-order model of a lithium-ion cell structure (2023) Frontiers in Materials, 10, art. no. 1212400
https://doi.org/10.3389/fmats.2023.1212400

Schmid A., Pasquale A., Ellersdorfer C., Champaney V., Raffler M., Guévelou S., Kizio S., Ziane M., Feist F., Chinesta F. PGD based meta modelling of a lithium-ion battery for real time prediction (2023) Frontiers in Materials, 10, art. no. 1245347
https://doi.org/10.3389/fmats.2023.1245347

Stolidi A., Touron A., Toulemonde L., Paradis H., Lapouge P., Coste F., Garandet J.-P. Towards in-situ fumes composition monitoring during an additive manufacturing process using energy dispersive X-ray fluorescence spectrometry (2023) Additive Manufacturing Letters, 6, art. no. 100153 https://doi.org/10.1016/j.addlet.2023.100153 - https://sam.ensam.eu/handle/10985/24798

Shirinbayan M., Abbasnezhad N., Nikooharf M.H., Benfriha K., Kallel A., Jendli Z., Fitoussi J. Manufacturing Process Effect on the Mechanical Properties of Glass Fiber/Polypropylene Composite Under High Strain Rate Loading: Woven (W-GF-PP) and Compressed GF50-PP (2023) Applied Composite Materials, 30 (6), pp. 1717 - 1736
https://doi.org/10.1007/s10443-023-10143-7
https://hal.science/hal-04187431v1

Tajdary P., Dorhmi K., Morin L., Derrien K., Hadjem-Hamouche Z., Braham C., Chevalier J.-P. Characterization and modeling of the damage mechanisms in ductile steel metal-matrix composites: Application to virtual forming (2023) Mechanics of Materials, 184, art. no. 104741
https://doi.org/10.1016/j.mechmat.2023.104741 - https://sam.ensam.eu/handle/10985/24585
https://sam.ensam.eu/handle/10985/24585

Taourit S., Le Gac P.-Y., Fayolle B. Coupling between hydrolysis and mechanical relaxation in an ester-based polyurethane network (2023) Journal of Polymer Science, 61 (22), pp. 2892 -https://hal.science/hal-04163705v1

Trdan U., Klobčar D., Berthe L., Šturm R., Bergant Z. High-cycle fatigue enhancement of dissimilar 2017A-T451/7075-T651 Al alloy joint fabricated by a single pass FSW without any post-processing (2023) Journal of Materials Research and Technology, 25, pp. 2333 - 2352
https://doi.org/10.1016/j.jmrt.2023.06.096

Tcharkhtchi A., Villalonga S., Zirak N., Lucas A., Farzaneh S., Shirinbayan M.
Optimal dome design for 700 bar hydrogen tank type IV: Hyperelliptic functions and shape factor (2023) Energy Storage, 5 (7), art. no. e469, https://sam.ensam.eu/handle/10985/24751 https://hal.science/hal-04163705v1

Tlili A., Ghanem F., Sidhom H., Braham C. Behavior and damage of the near-surface layer of parts pre-machined by the EDM process: Experimental characterization and numerical simulation (2023) International Journal of Advanced Manufacturing Technology, 126 (3-4), pp. 991 - 1003
https://doi.org/10.1007/s00170-023-11107-8

Veitia M.S.-I., Pommet M., Garnier G.M., Lagarde N., Khoulani S., Hauquier F., Havet J.L., Gomez C., Guiga W., Gervais M., Garcia R., Dewez S., Cousquer C. CAP’VR, a collaborative project to develop immersive practical work [CAP’VR, un projet collaboratif pour développer des travaux pratiques immersifs] (2023) Actualite Chimique, (486), pp. 37 - 45

Vellayappan M.V., Duarte F., Sollogoub C., Dirrenberger J., Guinault A., Frith J.E., Parkington H.C., Molotnikov A., Cameron N.R. Fabrication of Architectured Biomaterials by Multilayer Co-Extrusion and Additive Manufacturing (2023) Advanced Functional Materials, 33 (31), art. no. 2301547 https://doi.org/10.1002/adfm.202301547

Vibert C., Fayolle B., Ricard D., Dupont A.-L. Decoupling hydrolysis and oxidation of cellulose in permanent paper aged under atmospheric conditions (2023) Carbohydrate Polymers, 310, art. no. 120727 https://doi.org/10.1016/j.carbpol.2023.120727
https://hal.science/hal-04004126v1

Wang Z., Bouaziz O., Dirrenberger J., Lapouge P. Corrugation Reinforced Architectured Materials by Direct Laser Hardening: A Study of Geometrically Induced Work Hardening in Steel (2023) Steel Research International, 94 (6), art. no. 2200695
https://doi.org/10.1002/srin.202200695
https://hal.science/hal-04053752v1

Wu J., Jiang J., Chen Q., Chatzigeorgiou G., Meraghni F. Deep homogenization networks for elastic heterogeneous materials with two- and three-dimensional periodicity (2023) International Journal of Solids and Structures, 284, art. no. 112521
https://doi.org/10.1016/j.ijsolstr.2023.112521
https://hal.science/hal-04251172v1

Zanchi S., Engel M., Pascaud A., Bargain F., Lebreton S., Domingues dos Santos F., Roland S., Tencé-Girault S. Unraveling the morphological diversity of P(VDF-ter-TrFE-ter-CTFE) semi-crystalline terpolymers via combined AFM and SAXS experiments (2023) Polymer Testing, 120, art. no. 107973 https://doi.org/10.1016/j.polymertesting.2023.107973 - https://sam.ensam.eu/handle/10985/23582 - https://hal.science/hal-04056660v1

Zanchi S., Pascaud A., Domingues Dos Santos F., Tencé-Girault S., Roland S. Nanometric and Macroscopic Electroactive Response of P(VDF-co-TrFE) Copolymers and P(VDF-ter-TrFE-ter-CTFE) Terpolymers (2023) ACS Applied Polymer Materials, 5 (7), pp. 4966 - 4976
https://doi.org/10.1021/acsapm.3c00534

Zirak N., Tcharkhtchi A. Fatigue life prediction for amorphous glassy polymers based on cumulative evolution of micro-defects (2023) International Journal of Fatigue, 167, art. no. 107360 https://doi.org/10.1016/j.ijfatigue.2022.107360

Zirak N., Benfriha K., Shakeri Z., Shirinbayan M., Fitoussi J., Tcharkhtchi A. Interlayer bonding improvement and optimization of printing parameters of FFF polyphenylene sulfide parts using GRA ethod (2023) Progress in Additive Manufacturing
https://doi.org/10.1007/s40964-023-00469-w