1. Ahmadifar, M., Benfriha, K., Shirinbayan, M., Fitoussi, J., Tcharkhtchi, A. Mechanical behavior of polymer-based composites using fused filament fabrication under monotonic and fatigue loadings (2022) Polymers and Polymer Composites, 30, .1-11 (sam) (hal)
  2. Ahn, Y., Roma, G., Colin, X. Elucidating the Role of Alkoxy Radicals in Polyethylene Radio-Oxidation Kinetics (2022) Macromolecules, 55 (19), pp. 8676-8684. (Sam -  Hal)
  3. Alcaraz, -P., Le Coq, L., Pourchez, J., Thomas, D., Chazelet, S., Boudry, I., Barbado, M., Silvent, S., Dessale, C., Antoine, F., Guimier-Pingault, C., Cortella, L., Rouif, S., Bardin-Monnier, N., Charvet, A., Dufaud, O., Leclerc, L., Montigaud, Y., Laurent, C., Verhoeven, P., Joubert, A., Bouhanguel, A., Andres, Y., Gaffé, J., Martin, D.K., Huet, C., Boisset, S., Maurin, M., Rumeau, P., Charlot, F., Richaud, E., Moreau-Gaudry, A., Bonneterre, V., Cinquin, P., Landelle, C. (2022) Reuse of medical face masks in domestic and community settings without sacrificing safety: Ecological and economical lessons from the Covid-19 pandemic (2022) Chemosphere, 288, art. no. 132364 (sam) (hal)
  4. Amores, Victor J.; Montans, Francisco J.; Cueto, Elias; Chinesta, Francisco . Crossing Scales: Data-Driven Determination of the Micro-scale Behavior of Polymers From Non-homogeneous Tests at the Continuum-Scale. FRONTIERS IN MATERIALS. 9. Article number 114733 (sam) (hal)
  5. Araujo, S., Sainlaud, C., Delpouve, N., Richaud, E., Delbreilh, L., Dargent, E. Segmental Relaxation Dynamics in Amorphous Polylactide Exposed to UV Light (2022) Macromolecular Chemistry and Physics, 223 (16), art. no. 2200085, (Sam -  Hal)
  6. Auger, T., Barkia, B., Héripré, E., Michel, V., Mutel, D., Guillot, I., Hamouche, Z., Medina-Almazàn, L. Crack path and liquid metal embrittlement specificity of austenitic steels in mercury at room temperature (2022) Scripta Materialia, 215, art. no. 114733, .(sam) (hal)
  7. Auger, T., Baiz, S., Bataillou, L., Klochko, A. Liquid metal embrittlement of molybdenum by the eutectic gallium-indium-tin alloy (2022) Materialia, 25, art. no. 101523, (sam) (hal)
  8. Ayad, M., Lapostolle, L., Rondepierre, A., Le Bras, C., Scius-Bertrand, M., Ünaldi, S., Trdan, U., Rouchausse, Y., Grassy, J., Maillot, T., Lapoujade, V., Michel, C., Berthe, L. Modeling of multi-edge effects in the case of laser shock loadings applied on thin foils: Application for material characterization of aluminum alloys (2022) Journal of Applied Physics, 131 (9), art. no. 095902 (sam) (hal)
  9. Ayad, M., Lapostolle, L., Rondepierre, A., Bras, C.L., Ünaldi, S., Donik, Č., Klobčar, D., Berthe, L., Trdan, U. New methodology of dynamical material response of dissimilar FSWed Al alloy joint under high strain rate laser shock loading (2022) Materials and Design, 222, art. no. 111080, (sam) (hal)
  10. Badias, A., Alfaro, I., Gonzalez, D., Chinesta, F., Cueto, E. MORPH-DSLAM: Model Order Reduction for Physics-Based Deformable SLAM (2022) IEEE Transactions on Pattern Analysis and Machine Intelligence, 44 (11), pp. 7764-7777.Sam - Hal
  11. Bardin, A., Le Gac, P.-Y., Albouy, P.-A., Bindi, H., Fayolle, B. Correlation between crystallization and mechanical stress revealed by chain scission of segmented amide copolymer (2022) Polymer, 247, art. no. 124757, (sam) (hal)
  12. Bawareth, M., Xu, W., Ravichandran, D., Zhu, Y., Jambhulkar, S., Fonseca, N., Miquelard-Garnier, G., Camille, V., Matthew, L., Campbell, W., Song, K. Crosslinked Polyethylene (XLPE), Recycling via Foams 2022) Polymers, 14 (13), art. no. 2589, .sam) (hal)
  13. Ben Abdallah, A., Kallel, A., Hassine, T., Gamaoun, F., Tcharkhtchi, A. Modeling of viscoelastic behavior of a shape memory polymer blend (2022) Journal of Applied Polymer Science, 139 (13), art. no. 51859,(sam) (hal)
  14. Benbara, N., Martin, G., Rébillat, M., Mechbal, N. Bending waves focusing in arbitrary shaped plate-like structures: Study of temperature effects, development of a digital twin and of an associated neural-network based compensation procedure (2022) Journal of Sound and Vibration, 526, art. no. 116747(sam) (hal)
  15. Briand, W., Rébillat, M., Guskov, M., Mechbal, N. Upcoming damage size quantification in aeronautic composite structures based on imaging results post-processing (2022) Journal of Intelligent Material Systems and Structures, 33 (2), pp. 251-265.sam) (hal)
  16. Bawareth, M., Xu, W., Ravichandran, D., Zhu, Y., Jambhulkar, S., Fonseca, N., Miquelard-Garnier, G., Camille, V., Matthew, L., Campbell, W., Song, K. Crosslinked Polyethylene (XLPE), Recycling via Foams (2022) Polymers, 14 (13), art. no. 2589 sam) (hal)
  17. Castéran, F., Delage, K., Hascoët, N., Ammar, A., Chinesta, F., Cassagnau, P. Data-Driven Modelling of Polyethylene Recycling under High-Temperature Extrusion (2022) Polymers, 14 (4), art. no. 800 (sam) (hal)
  18. Cai, R., Wen, W., Wang, K., Peng, Y., Ahzi, S., Chinesta, F. Tailoring interfacial properties of 3D-printed continuous natural fiber reinforced polypropylene composites through parameter optimization using machine learning methods (2022) Materials Today Communications, 32, art. no. 103985, .Sam - hal
  19. Champaney, V., Chinesta, F., Cueto, E Engineering empowered by physics-based and data-driven hybrid models: A methodological overview (2022) International Journal of Material Forming, 15 (3), art. no. 31, (sam) (hal)
  20. Champaney, V., Pasquale, A., Ammar, A., Chinesta, F. Parametric Curves Metamodelling Based on Data Clustering, Data Alignment, POD-Based Modes Extraction and PGD-Based Nonlinear Regressions (2022) Frontiers in Materials, 9, art. no. 904707,  (sam) (hal)
  21. Champaney, V., Amores, V.J., Garois, S., Irastorza-Valera, L., Ghnatios, C., Montáns, F.J., Cueto, E., Chinesta, F. Modeling systems from partial observations (2022) Frontiers in Materials, 9, art. no. 970970, (sam) (hal)
  22. Charon, G., Peixinho, J., Michely, L., Guinault, A., Langlois, V.         Rosin natural terpenes as processing aid for polyhydroxyalkanoate: Thermal, mechanical, and viscoelastic properties (2022) Journal of Applied Polymer Science, 139 (43), art. no. e53052 (sam) (hal)
  23. Cherri, A., Iliopoulos, I., Regnier, G., Brule, B., Le, G., Tence-Girault, S.Thermal and Crystallization Properties of the Alternated Tere/Iso PEKK Copolymer: Importance in High-Temperature Laser Sintering(2022) ACS Applied Polymer Materials, 4 (4), pp. 2806-2818. (sam) (hal)
  24. Crenn, M.-J., Dubot, P., Mimran, E., Fromentin, O., Lebon, N., Peyre, P. et al. Influence of Anodized Titanium Surfaces on the Behavior of Gingival Cells in Contact with: A Systematic Review of In Vitro Studies (Crystals 2021, 11, 1566) (2022) Crystals, 12 (7), art. no. 893, (Sam) (Hal)
  25.  Da Silva, S., Villani, L.G.G., Rébillat, M., Mechbal, N. Gaussian Process NARX Model for Damage Detection in Composite Aircraft Structures (2022) Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5 (1), art. no. 011007, (sam) (hal)
  26. Daligault, J., Dal, M., Gorny, C., Coste, F., Fabbro, R.Combination of Eulerian and ray-tracing approaches for copper laser welding simulation (2022) Journal of Laser Applications, 34 (4), art. no. 042042, (Sam - Hal)
  27.  Delannoy, R., Richaud, E., Tognetti, V., Quélennec, B., Delbreilh, L., Delpouve, N. Macromolecular Mobility Changes Induced by Thermal Aging of Epoxy-amine Polymer Networks (2022) Macromolecular Symposia, 405 (1), art. no. 2100228, (Sam - Hal)
  28. Delannoy, R., Tognetti, V., Richaud, E. Experimental and theoretical insights on the thermal oxidation of epoxy-amine networks (2022) Polymer Degradation and Stability, 206, art. no. 110188( Sam - Hal)
  29. Delannoy, R., Tognetti, V., Richaud, E.Structure–Properties Relationships Involved in the Embrittlement of Epoxies (2022) Polymers, 14 (21), art. no. 4685 (Sam - Hal)
  30. Derouiche, K., Daoud, M., Traidi, K., Chinesta, F. Real-time prediction by data-driven models applied to induction heating process (2022) International Journal of Material Forming, 15 (4), art. no. 48 (sam) (hal)
  31. Di Lorenzo, D., Champaney, V., Germoso, C., Cueto, E., Chinesta, F. Data Completion, Model Correction and Enrichment Based on Sparse Identification and Data Assimilation (2022) Applied Sciences (Switzerland), 12 (15), art. no. 7458, .(Sam - Hal)
  32.  Dmochowska, A., Peixinho, J., Sollogoub, C., Miquelard-Garnier, G. Dewetting Dynamics of Sheared Thin Polymer Films: An Experimental Study (2022) ACS Macro Letters, pp. 422-427. (sam) (hal)
  33. Doizi, S., Germain, T., Panthier, F., Compérat, E., Traxer, O., Berthe, L. Comparison of Holmium:YAG and Thulium Fiber Lasers on Soft Tissue: An Ex Vivo Study (2022) Journal of endourology, 36 (2), pp. 251-258. (sam) (hal)
  34. Dupuis, A., Pesce, J.-J., Marijon, J.-B., Roux, S., Régnier, G. Use of a digital image correlation method for full-field shrinkage measurement in injection molding (2022) Journal of Strain Analysis for Engineering Design, 57 (8), pp. 702-713.(Sam - Hal)
  35. EL FALLAKI IDRISSI, Mohammed; PRAUD, Francis; CHAMPANEY, Victor; CHINESTA, Francisco; MERAGHNI, Fodil  (2022). Multiparametric modelling of composite materials based on non-intrusive PGD informed by multiscale analyses: Application for real-time stiffness prediction of woven composites.  Composite Structures. Article number 116228 (sam) (hal)
  36. Essid, N., Eddhahak, A., Neji, J. Experimental and numerical analysis of the energy efficiency of PCM concrete wallboards under different thermal scenarios (2022) Journal of Building Engineering, 45, art. no. 103547, .(sam) (hal)
  37. Faraj, H., Follain, N., Sollogoub, C., Almeida, G., Chappey, C., Marais, S., Tencé-Girault, S., Gouanvé, F., Espuche, E., Domenek, S. Gas barrier properties of polylactide/cellulose nanocrystals nanocomposites (2022) Polymer Testing, 113, art. no. 107683,(Sam - Hal)
  38. Farzaneh, S., Shirinbayan, M.  Processing and Quality Control of Masks: A Review (2022) Polymers, 14 (2), art. no. 291, (sam) (hal)
  39. Fitoussi, J., Nikooharf, M.H., Kallel, A., Shirinbayan, M. Mechanical Properties and Damage Behavior of Polypropylene Composite (GF50-PP) Plate Fabricated by Thermocompression Process Under High Strain Rate Loading at Room and Cryogenic Temperatures (2022) Applied Composite Materials, 29 (5), pp. 1959-1979.(Sam - Hal)
  40. Freymond, C., Guinault, A., Charbuillet, C., Fayolle, B. Reprocessing of polymer blends from WEEE: A methodology for predicting embrittlement(2022) Polymer Testing, 106, art. no. 107458,(sam) (hal)
  41. Freymond, C., Guinault, A., Gervais, M., Pluta, M., Makowski, T., Piorkowska, E., Sollogoub, C. Crystallization behavior and morphological features of ethylene-vinyl alcohol 44 copolymer (2022) Express Polymer Letters, 16 (4), pp. 338-353.(sam) (hal)
  42. Freymond, C., Mackré-Delannoy, X., Guinault, A., Charbuillet, C., Fayolle, B. Thermal oxidation of acrylonitrile-butadiene-styrene: Origin of the ductile/brittle transition (2022) Polymer Degradation and Stability, 206, art. no. 110186, (Sam - Hal)
  43. Gbekou, F.K., Benzarti, K., Boudenne, A., Eddhahak, A., Duc, M. Mechanical and thermophysical properties of cement mortars including bio-based microencapsulated phase change materials (2022) Construction and Building Materials, 352, art. no. 129056,  (sam) (hal)
  44. Germain, T., Berthe, L., Panthier, F., Gorny, C., Traxer, O., Doizi, S. Assessment of Factors Involved in Laser Fiber Degradation with Thulium Fiber Laser (2022) Journal of Endourology, 36 (5), pp. 668-673.(Sam - Hal)
  45. Geoffroy-Donders, P., Allaire, G., Michailidis, G., Pantz, O. Coupled optimization of macroscopic structures and lattice infill (2022) International Journal for Numerical Methods in Engineering, 123 (13), pp. 2963-2985.(Sam - Hal)Ghnatios, C., Barasinski, A., Chinesta, F.  On the High-Resolution Discretization of the Maxwell Equations in a Composite Tape and the Heating Effects Induced by the Dielectric Losses (2022) Computation, 10 (2), art. no. 24, (sam) (hal)
  46. Ghnatios, C., Barasinski, A., Chinesta, F. On the High-Resolution Discretization of the Maxwell Equations in a Composite Tape and the Heating Effects Induced by the Dielectric Losses (2022) Computation, 10 (2), art. no. 24Sam - Hal)
  47. Ghnatios, C., Champaney, V., Pasquale, A., Chinesta, F. A Regularized Real-Time Integrator for Data-Driven Control of Heating Channels (2022) Computation, 10 (10), art. no. 176,(Sam - Hal)
  48. Gong, X., Auger, T., Zhu, W., Lei, H., Xiang, C., Yu, Z., Short, M.P., Wang, P., Yin, Y. Intergranular precipitation-enhanced wetting and phase transformation in an Al0.4CoCrFeNi high-entropy alloy exposed to lead-bismuth eutectic (2022) Corrosion Science, 196, art. no. 110038  (sam) (hal)
  49. Gong, X., Short, M.P., Auger, T., Charalampopoulou, E., Lambrinou, K. Environmental degradation of structural materials in liquid lead- and lead-bismuth eutectic-cooled reactors (2022) Progress in Materials Science, 126, art. no. 100920 (sam) (hal)
  50. Goutaudier, D., Berthe, L., Chinesta, F. Exploring space separation techniques for 3D elastic waves simulations (2022) Computational Mechanics, 69 (5), pp. 1147-1163. (sam) (hal)
  51. Guinebretière, R., Ors, T., Michel, V., Thune, E., Huger, M., Arnaud, S., Blanc, N., Boudet, N., Castelnau, O. Coupling between elastic strains and phase transition in dense pure zirconia polycrystals (2022) Physical Review Materials, 6 (1), art. no. 013602, .(sam) (hal)
  52. Guo, S., Rebillat, M., Mechbal, N.Dichotomy property of dispersion equation of guided waves propagating in anisotropic composite plates (2022) Mechanical Systems and Signal Processing, 164, art. no. 108212 (sam) (ha)
  53. Ishida, T., Richaud, E., Gervais, M., Gaudy, A., Kitagaki, R., Hagihara, H., Elakneswaran, Y. Thermal aging of acrylic-urethane network: Kinetic modeling and end-of-life criteria combined with mechanical properties (2022) Progress in Organic Coatings, 163, art. no. 106654, (sam) (hal)
  54. Hosseinnezhad, R., Vozniak, I., Romano, D., Rastogi, S., Regnier, G., Piorkowska, E., Galeski, A. Formation of UHMWPE Nanofibers during Solid-State Deformation (2022) Nanomaterials, 12 (21), art. no. 3825, .Sam - Hal
  55. Julienne, F., Richaud, E. Degradation of PVDF-HFP Matrix (2022) Macromolecular Symposia, 405 (1), art. no. 2100223, .Sam - Hal
  56. Kadri, R., Abdelaziz, M.N., Fayolle, B., Hassine, M.B., Witz, J.F. (2022). A unified mechanical based approach to fracture properties estimates of rubbers subjected to aging. International Journal of Solids and Structures, 234-235, art. no. 111305 (sam) (hal)
  57. Kazemzadeh-Parsi, M.J., Ammar, A., Chinesta, F. Domain decomposition involving subdomain separable space representations for solving parametric problems in complex geometries(2022) Advanced Modeling and Simulation in Engineering Sciences, 9 (1), art. no. 2 (sam) (hal)
  58. Kiser, S.L., Rébillat, M., Guskov, M., Ranc, N.  Real-time sinusoidal parameter estimation for damage growth monitoring during ultrasonic very high cycle fatigue tests (2022) Mechanical Systems and Signal Processing, 182, art. no. 109544 (sam) (hal)
  59. Laamouri, A., Sidhom, H., Braham, C.A Predictive Methodology for High-Cycle Fatigue Behavior of Machined Metallic Parts(2022) Journal of Materials Engineering and Performance, 31 (6), pp. 4776-4794.(sam) (hal)
  60. Lapostolle, L., Derrien, K., Morin, L., Berthe, L., Castelnau, O. Modeling and simulation of laser shock waves in elasto-plastic 1D layered specimens (2022) International Journal of Solids and Structures, 239-240, art. no. 111422, (sam) (hal)
  61. Lavisse, L., Berger, P., Kanjer, A., Optasanu, V., Gorny, C., Peyre, P., François, M., Montesin, T., Marco de Lucas, M.C. Tracking the role of nitrogen in the improvement of the high temperature oxidation resistance of titanium by mechanical treatments (2022) Corrosion Science, 197, art. no. 110080, (sam) (hal)
  62. Lebert, N., Gay, N., Richaud, E. Mechanical and macromolecular changes during thermal degradation of polyphenylsulfone (2022) Polymer Degradation and Stability, 195, art. no. 109812, (sam) (hal)
  63. Le Bras, C., Fosse, C., Delbreilh, L., Gervais, M., Ayad, M., Sounakoye, A.S., Berthe, L., Valadon, S., Fayolle, B.  Transition of elastomers from a rubber to glassy state under laser shock conditions (2022) Soft Matter, 18 (31), pp. 5782-5790. Sam - Hal
  64. Lhuissier, P., Hébrard, L., Bataillon, X., Lapouge, P., Coste, F., Peyre, P., Boller, E., Blandin, J.-J., Salvo, L., Martin, G. Miniature laser powder bed fusion system for in situ synchrotron x-ray micro-computed tomography experiments at the European Synchrotron Radiation Facility (2022) Review of Scientific Instruments, 93 (8), art. no. 083701, .Sam - Hal
  65. Li, S., Wang, K., Zhu, W., Peng, Y., Ahzi, S., Chinesta, F. Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites (2022) Construction and Building Materials, 340, art. no. 127842, .(sam) (hal)
  66. Li, S., Wang, K., Zhu, W., Peng, Y., Ahzi, S., Chinesta, F. Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces (2022) International Journal of Advanced Manufacturing Technology, 123 (9-10), pp. 3147-3158. Sam - Hal
  67. Loreau, T., Champaney, V., Hascoet, N., Lambarri, J., Madarieta, M., Garmendia, I., Chinesta, F. Parametric analysis and machine learning-based parametric modeling of wire laser metal deposition induced porosity (2022) International Journal of Material Forming, 15 (3), art. no. 33( sam) (hal)
  68. Loyer, C., Ferreira, P., Marijon, J.https://hal.science/hal-04076837-B., Michel, V., Régnier, G., Vera, J., Duval, V., Richaud, E. Embrittlement of polybutylene terephthalate induced by injection molding (2022) Polymer Degradation and Stability, 196, art. no. 109843 (sam) Hal
  69. Loyer, C., Régnier, G., Duval, V., Richaud, E. Embrittlement of Poly(butylene terephthalate) Induced by Injection Molding Process (2022) Macromolecular Symposia, 405 (1), art. no. 2100219,  (Sam) (Hal)
  70. Marciszko-Wiąckowska, M., Oponowicz, A., Baczmański, A., Braham, C., Wątroba, M., Wróbel, M., Klaus, M., Genzel, C. A novel approach for nondestructive depth-resolved analysis of residual stress and grain interaction in the near-surface zone applied to an austenitic stainless steel sample subjected to mechanical polishing (2022) Measurement: Journal of the International Measurement Confederation, 194, art. no. 111016, (sam) (hal)
  71. Mayi, Y.A., Queva, A., Dal, M., Guillemot, G., Metton, C., Moriconi, C., Peyre, P., Bellet, M. Multiphysics simulation of single pulse laser powder bed fusion: comparison of front capturing and front tracking methods (2022) International Journal of Numerical Methods for Heat and Fluid Flow, 32 (6), pp. 2149-2176. (sam) (hal)
  72. Moya, B., Badías, A., Alfaro, I., Chinesta, F., Cueto, E.Digital twins that learn and correct themselves(2022) International Journal for Numerical Methods in Engineering, 123 (13), pp. 3034-3044.(sam) (hal)
  73. Muñoz, D., Nadal, E., Albelda, J., Chinesta, F., Ródenas, J.J. Allying topology and shape optimization through machine learning algorithms (2022) Finite Elements in Analysis and Design, 204, art. no. 103719,(sam) (hal)
  74. Nordet, G., Gorny, C., Mayi, Y., Daligault, J., Dal, M., Effernelli, A., Blanchet, E., Coste, F., Peyre, P. Absorptivity measurements during laser powder bed fusion of pure copper with a 1 kW cw green laser (2022) Optics and Laser Technology, 147, art. no. 107612 (sam) (hal)
  75. Nouira, S., Hassine, T., Fitoussi, J., Shirinbayan, M., Gamaoun, F., Tcharkhtchi, A. Non-isothermal crystallization kinetics and its effect on the mechanical properties of homopolymer isotactic polypropylene (2022) Journal of Polymer Research, 29 (1), art. no. 26, (sam) (hal)
  76. Nouri, M., Artozoul, J., Caillaud, A., Ammar, A., Chinesta, F., Köser, O. Shrinkage porosity prediction empowered by physics-based and data-driven hybrid models (2022) International Journal of Material Forming, 15 (3), art. no. 25, .Sam - Hal
  77. Nicolas, C., Huang, J., Richaud, E., David, A., Gac, P.-Y.L., Minne, W., Drozdzak, R., Recher, G., Fontaine, L., Montembault, V. Enhanced thermo-oxidative stability of polydicyclopentadiene containing covalently bound nitroxide groups (2022) Polymer Degradation and Stability, 195, art. no. 109765,(sam) (hal)
  78. Outeiro, J., Cheng, W., Chinesta, F., Ammar, A. Modelling and Optimization of Machining of Ti-6Al-4V Titanium Alloy Using Machine Learning and Design of Experiments Methods (2022) Journal of Manufacturing and Materials Processing, 6 (3), art. no. 58, .Sam - Hal
  79. Panthier, F., Germain, T., Gorny, C., Berthe, L., Doizi, S., Traxer, O. Laser fiber displacement velocity during tm‐fiber and ho:Yag laser lithotripsy: Introducing the concept of optimal displacement velocity (2022) Journal of Clinical Medicine, 11 (1), art. no. 181, (sam) (hal)
  80. Panthier, F., Chiron, P., Gorny, C., Berthe, L., Doizi, S., Corrales, M., Traxer, O. Laser-Induced Ocular Lesions with Thulium Fiber Laser in Endourology: An Ex Vivo Study (2022) Journal of Endourology, 36 (8), pp. 1113-1118Sam - Hal
  81. Pasquale, A., Champaney, V., Kim, Y., Hascoët, N., Ammar, A., Chinesta, F. A parametric metamodel of the vehicle frontal structure accounting for material properties and strain-rate effect: application to full frontal rigid barrier crash test (2022) Heliyon, 8 (12), art. no. e12397,Sam - Hal
  82. Paux, J., Morin, L., Brenner, R. A model of porous plastic single crystals based on fractal slip lines distribution (2022) Journal of the Mechanics and Physics of Solids, 167, art. no. 104948 sam) (hal)
  83. Penas, R., Balmes, E., Gaudin, A. A unified non-linear system model view of hyperelasticity, viscoelasticity and hysteresis exhibited by rubber (2022) Mechanical Systems and Signal Processing, 170, art. no. 108793, .(sam) (hal)
  84. Pradel, P., De Rességuier, T., Malaise, F., Olbinado, M.P., Rack, A., Grenzer, J., Loison, D., Berthe, L. In situ radiographic and ex situ tomographic investigation of pore collapse in laser shock-loaded polyurethane foam (2022) Journal of Applied Physics, 131 (5), art. no. 055106 (sam) (hal)
  85. Purushottam Raj Purohit, R.R.P., Tardif, S., Castelnau, O., Eymery, J., Guinebretière, R., Robach, O., Ors, T., Micha, J.-S. LaueNN: Neural-network-based hkl recognition of Laue spots and its application to polycrystalline materials (2022) Journal of Applied Crystallography, 55, pp. 737-750.(sam) (hal
  86. Purushottam Raj Purohit, Ravi Raj Purohit., Fowan, Daniel Pepin., Thune, Elsa., Arnaud, Stephan.,  Blanc, Nils., Castelnau, Olivier., Guinebretière, René. Phase transition and twinning in polycrystals probed by in situ high temperature 3D reciprocal space mapping (2022). Appl. Phys. Lett. 121, art. no.181901Sam - Hal
  87. Quelennec, B., Delpouve, N., Delbreilh, L., Delannoy, R., Richaud, E.;Physical Aging of an Epoxy Resin for Civil Engineering Applications from Fast Scanning Calorimetry Investigations (2022) Macromolecular Symposia, 405 (1), art. no. 2100230,Sam - Hal
  88. Ranc, N., Messager, A., Junet, A., Palin-Luc, T., Buffière, J.Y., Saintier, N., Elmay, M., Mancini, L., King, A., Nadot, Y. Internal fatigue crack monitoring during ultrasonic fatigue test using temperature measurements and tomography (2022) Mechanics of Materials, 174, art. no. 104471, Sam -  Hal
  89.  Richaud E., Pires, L., Roland, S., Truffault, L., Laiarinandrasana, L., Corfa, A., Pinaud, J., Caillol, S., Ladmiral, V., Beauvais, C. Thermal Degradation of Fluorosilicone Elastomers (2022) Macromolecular Symposia, 405 (1), art. no. 2100220, .Sam - Hal
  90. Rijal, B., Delbreilh, L., Sollogoub, C., Baer, E., Saiter-Fourcin, A. Multiscale Analysis of Segmental Relaxation in PC/PETg Multilayers: Evidence of Immiscible Nanodroplets (2022) Macromolecules, 55 (15), pp. 6562-6572.Sam - Hal
  91. Rill-García, R., Dokladalova, E., Dokládal, P., Caron, J.-F., Mesnil, R., Margerit, P., Charrier, M. Inline monitoring of 3D concrete printing using computer vision    (2022) Additive Manufacturing, 60, art. no. 103175,Sam - Hal
  92. Rondepierre, A., Casagrande, O., Rouchausse, Y., Castelnau, O., Berthe, L. Development and optimization of Laser Shock Repeated Dense Peening (LSRDP) using most advanced laser architectures (2022) Optics Express, 30 (7), pp. 10528-10546. (sam) (hal)
  93. Saad, S., Sinha, A., Cruz, C., Régnier, G., Ammar, A. Towards an accurate pressure estimation in injection molding simulation using surrogate modeling (2022) International Journal of Material Forming, 15 (6), art. no. 72, .(sam) (hal)
  94. Salivon, T., Comte, R., Colin, X. Thermal aging of electrical cable insulation made of cross-linked low density polyethylene for under-hood application in automotive industry (2022) Journal of Vinyl and Additive Technology, 28 (2), pp. 418-429. (sam) (hal)
  95. Seddik, R., Rondepierre, A., Prabhakaran, S., Morin, L., Favier, V., Palin-Luc, T., Berthe, L. (2022). Identification of constitutive equations at very high strain rates using shock wave produced by laser. European Journal of Mechanics, A/Solids, 92, art. no. 104432 (sam) (hal)
  96. Shakeri, Z., Benfriha, K., Zirak, N., Shirinbayan, M. Mechanical strength and shape accuracy optimization of polyamide FFF parts using grey relational analysis (2022) Scientific reports, 12 (1), p. 13142.Sam - Hal
  97. Shibaev, A.V., Kuklin, A.I., Torocheshnikov, V.N., Orekhov, A.S., Roland, S., Miquelard-Garnier, G., Matsarskaia, O., Iliopohttps://hal.science/hal-04078423ulos, I., Philippova, O.E.Double dynamic hydrogels formed by wormlike surfactant micelles and cross-linked polymer (2022) Journal of Colloid and Interface Science, 611, pp. 46-60.  (sam) (hal)
  98. Shirinbayan, M; Benfriha, K; Tcharkhtchi, A. (2022) . Geometric Accuracy and Mechanical Behavior of PA6 Composite Curved Tubes Fabricated by Fused Filament Fabrication (FFF) . ADVANCED ENGINEERING MATERIALS. Article Number 2101056Sam - Hal
  99. Shirinbayan, M., Fitoussi, J., Kheradmand, F., Montazeri, A., Zuo, P., Tcharkhtchi, A. Coupling effect of strain rate and temperature on tensile damage mechanism of polyphenylene sulfide reinforced by glass fiber (PPS/GF30) (2022) Journal of Thermoplastic Composite Materials, 35 (11), pp. 1994-2008.Sam - Hal
  100. Shirinbayan, M., Zirak, N., Saddaoui, O., Mammeri, A., Azzouz, K., Benfriha, K., Tcharkhtchi, A., Fitoussi, J. Effect of build orientation and post-curing of (meth)acrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi-static to high strain rate loadings (2022) International Journal of Advanced Manufacturing Technology, 123 (5-6), pp. 1877-1887.Sam - Hal
  101. Suraci, S.V., Colin, X., Fabiani, D. Multiscale Modeling of Permittivity of Polymers With Aging: Analysis of Molecular Scale Properties and Their Impact on Electrical Permittivity (2022) IEEE Transactions on Dielectrics and Electrical Insulation, 29 (5), pp. 1795-1802Sam - Hal
  102. Tajdary, P., Morin, L., Romero-Resendiz, L., Gorji, M.B., Braham, C., Gonzalez, G. Analysis of shear ductile damage in forming processes using a micromechanical model with void shape effects (2022) International Journal of Solids and Structures, 248, art. no. 111640 (sam) (hal)
  103. Tajdary, P., Morin, L., Braham, C., Gonzalez, G. A Deconvolution Method for the Mapping of Residual Stresses by X-Ray Diffraction (2022) Experimental Mechanics, 62 (8), pp. 1349-1362.Sam - Hal
  104. Tamboura, S., Abdessalem, A., Fitoussi, J., Ben Daly, H., Tcharkhtchi, A. On the mechanical properties and damage mechanisms of short fibers reinforced composite submitted to hydrothermal aging: Application to sheet molding compound composite (2022) Engineering Failure Analysis, 131, art. no. 105806 (sam) (hal)
  105. Taourit, S., Le Gac, P.-Y., Fayolle, B. Relationship between network structure and ultimate properties in polyurethane during a chain scission process (2022), 201, art. no. 109971, (sam)(hal)
  106. Thézé, A., Guinault, A., Régnier, G., Richard, S., Macquaire, B. Fused filament fabrication process window for good interlayer bonding: Application to highly filled polymers in metallic powder* (2022) Polymer Engineering and Science, 62 (2), pp. 336-348.(sam) (hal)
  107. Torregrosa, S., Champaney, V., Ammar, A., Herbert, V., Chinesta, F. Surrogate parametric metamodel based on Optimal Transport (2022) Mathematics and Computers in Simulation, 194, pp. 36-63. (sam) (hal)
  108. Torregrosa, S., Champaney, V., Ammar, A., Herbert, V., Chinesta, F. Hybrid twins based on optimal transport (2022) Computers and Mathematics with Applications, 127, pp. 12-24.Sam - Hal
  109. Traoré, S., Koutiri, I., Schneider, M., Lefebvre, P., Rodrigues, J., Dupuy, C., Coste, F., Peyre, P. Influence of gaseous environment on the properties of Inconel 625 L-PBF parts (2022) Journal of Manufacturing Processes, 84, pp. 1492-1506.Sam - Hal
  110. Ucla, P., Ju, X., Demircioglu, M., Baiz, S., Muller, L., Germain, S., Monnot, C., Semetey, V., Coscoy, S. Dynamics of Endothelial Engagement and Filopodia Formation in Complex 3D Microscaffolds (2022) International Journal of Molecular Sciences, 23 (5), art. no. 2415 (sam) (hal)
  111. Vanaei, H.R., Khelladi, S., Deligant, M., Shirinbayan, M., Tcharkhtchi, A. Numerical Prediction for Temperature Profile of Parts Manufactured using Fused Filament Fabrication (2022) Journal of Manufacturing Processes, 76, pp. 548-558.(sam) (hal)
  112. Vanaei, H.R., Magri, A.E., Rastak, M.A., Vanaei, S., Vaudreuil, S., Tcharkhtchi, A.  Numerical–Experimental Analysis toward the Strain Rate Sensitivity of 3D-Printed Nylon Reinforced by Short Carbon Fiber (2022) Materials, 15 (24), art. no. 8722Sam - Hal
  113. Vanaei, H.R., Khelladi, S., Tcharkhtchi, A. Roadmap: Numerical-Experimental Investigation and Optimization of 3D-Printed Parts Using Response Surface Methodology (2022) Materials, 15 (20), art. no. 7193(sam) (hal)
  114. Wang, Z., Dirrenberger, J., Lapouge, P., Dubent, S. (2022) . Laser treatment of 430 ferritic stainless steel for enhanced mechanical properties Materials Science and Engineering A, 831, art. no. 142205, (sam) (hal)
  115. Wang, Z., Dirrenberger, J., Lapouge, P., Dubent, S., Jabir, H., Michel, V. Microstructure Evolution and Mechanical Properties of AISI 430 Ferritic Stainless Steel Strengthened Through Laser Carburization (2022) Journal of Engineering Materials and Technology, 144 (4), art. no. 041005,Sam - Hal
  116. Weisz-Patrault, Daniel, Margerit, Pierre,  Constantinescu, Andrei  (2022). Residual stresses in thin walled-structures manufactured by directed energy deposition: In-situ measurements, fast thermo-mechanical simulation and buckling, Additive Manufacturing, 56, art numb 102903 (sam) (hal)
  117. Wu, J., Ghnatios, C., Mordillat, P., Tourbier, Y., Chinesta, F. Functional Parametric Elasto-Dynamics for Efficient Multicomponent Design (2022) Computation, 10 (12), art. no. 218Sam - Hal
  118. Yue, Nan , Broer, Agnes , Briand, William , Rebillat, Marc  Loutas, Theodoros Zarouchas, Dimitrios. (2022). Assessing stiffness degradation of stiffened composite panels in post-buckling compression-compression fatigue using guided waves . Composite Structures. 293, article number 11575 (sam) (hal)
  119. Zirak, N., Maadani, A.M., Salahinejad, E., Abbasnezhad, N., Shirinbayan, M. Fabrication, drug delivery kinetics and cell viability assay of PLGA-coated vancomycin-loaded silicate porous microspheres (2022) Ceramics International, 48 (1), pp. 48-54. (sam) (hal)
  120. Zirak, N., Shirinbayan, M., Farzaneh, S., Tcharkhtchi, A. Effect of molecular weight on crystallization behavior of poly (lactic acid) under isotherm and non-isotherm conditions (2022) Polymers for Advanced Technologies, 33 (4), pp. 1307-1316.(sam) (hal)
  121. Zirak, N., Shirinbayan, M., Benfriha, K., Deligant, M., Tcharkhtchi, A. Stereolithography of (meth)acrylate-based photocurable resin: Thermal and mechanical properties (2022) Journal of Applied Polymer Science, 139 (22), art. no. 52248 (sam) (hal)

 

 

Articles in press

  1. Delozanne, J., Montana, J.S., Guinault, A., Desgardin, N., Cuvillier, N., Richaud, E. Thermal ageing of bonded assemblies. Effect of adhesive curing degree (2022) Journal of Adhesion, . Article in press
  2. Delozanne, J., Montana, J.S., Guinault, A., Desgardin, N., Cuvillier, N., Richaud, E. Thermal ageing of bonded assemblies. Effect of adhesive curing degree (2022) Journal of Adhesion, . Article in press
  3. Moya, B., Badias, A., Gonzalez, D., Chinesta, F., Cueto, E. Physics perception in sloshing scenes with guaranteed thermodynamic consistency (2022) IEEE Transactions on Pattern Analysis and Machine Intelligence, . Article in Press
  4. Ravichandran, D., Ahmed, R.J., Banerjee, R., Ilami, M., Marvi, H., Miquelard-Garnier, G., Golan, Y., Song, K. Multi-material 3D printing-enabled multilayers for smart actuation via magnetic and thermal stimuli (2022) Journal of Materials Chemistry C, . Article in Press