1. Abbasnezhad, N., Shirinbayan, M., Tcharkhtchi, A., & Bakir, F. (2020). In vitro study of drug release from various loaded polyurethane samples and subjected to different non-pulsed flow rates. Journal of Drug Delivery Science and Technology, 55, (sam) (hal)
  2. Abbasnezhad, N., Zirak, N., Shirinbayan, M., Kouidri, S., Salahinejad, E., Tcharkhtchi, A., & Bakir, F. (2020). Controlled release from polyurethane films: Drug release mechanisms. Journal of Applied Polymer Science,  Article Number: e50083  (sam) (hal)
  3. Abdessalem, A., Tamboura, S., Fitoussi, J., Ben Daly, H., & Tcharkhtchi, A. (2020). Bi-phasic water diffusion in sheet molding compound composite. Journal of Applied Polymer Science, 137(7) Article number 48381 (sam) (hal)
  4. Aghamohammadi, H., Eslami-Farsani, R., & Tcharkhtchi, A. (2020). The effect of multi-walled carbon nanotubes on the mechanical behavior of basalt fibers metal laminates: An experimental study. International Journal of Adhesion and Adhesives, 98, Article number 102538 (sam) (hal)
  5. Ammar, A., Ghnatios, C., Delplace, F., Barasinski, A., Duval, J. -., Cueto, E., & Chinesta, F. (2020). On the effective conductivity and the apparent viscosity of a thin rough polymer interface using PGD-based separated representations. International Journal for Numerical Methods in Engineering, 121(23), 5256-5274. (sam) (hal)
  6. Argerich- Martín, C. ., Méndez, A. C., Sainges, O., Petiot, E., Barasinski, A., Piana, M., . . . Chinesta, F. (2020). Empowering design based on hybrid twin™: Application to acoustic resonators. Designs, 4(4), 1-14. (sam) (hal)
  7. Ayari, H., Shirinbayan, M., Imaddahen, A., Tamboura, S., Ben Daly, H., Tcharkhtchi, A., & Fitoussi, J. (2020). Micromechanical modelling of dynamic behavior of advanced sheet molding compound (A-SMC) composite. Applied Composite Materials, 27(3), 321-335. (sam) (hal)
  8. Ayari, H., Fitoussi, J., Imaddahen, A., Tamboura, S., Shirinbayan, M., Dali, H. B., & Tcharkhtchi, A. (2020). Two hybrid approaches to fatigue modeling of advanced-sheet molding compounds (A-SMC) composite. Applied Composite Materials, 27(1-2), 19-36. (sam) (hal)
  9. Ayoub, G., Rodriguez, A. K., Mansoor, B., & Colin, X. (2020). Modeling the visco-hyperelastic–viscoplastic behavior of photodegraded semi-crystalline low-density polyethylene films. International Journal of Solids and Structures, 204-205, 187-198. (sam(hal)
  10. Badías, A., González, D., Alfaro, I., Chinesta, F., & Cueto, E. (2020). Real-time interaction of virtual and physical objects in mixed reality applications. International Journal for Numerical Methods in Engineering, 121(17), 3849-3868.  (sam) (hal)
  11. Bahry, T., Cui, Z., Deniset-Besseau, A., Gervais, M., Mbomekalle, I., Sollogoub, C., . . . Remita, S. (2020). Optimal strategy based on radiation chemistry for facile and direct synthesis of poly(3-thiophene acetic acid) polymers in water and dichloromethane. New Journal of Chemistry, 44(27), 11652-11666. (sam) (hal)
  12. Bardin, A., Le Gac, P. -., Cérantola, S., Simon, G., Bindi, H., & Fayolle, B. (2020). Hydrolytic kinetic model predicting embrittlement in thermoplastic elastomers. Polymer Degradation and Stability, 171, Article number 109002. (sam) (hal)
  13. Bardin, A., Le Gac, P. -., Bindi, H., & Fayolle, B. (2020). Relationships between molar mass and fracture properties of segmented urethane and amide copolymers modified by chemical degradation. Journal of Polymer Science, 58(22), 3170-3182. (sam) (hal)
  14. Bargain, F., Thuau, D., Hadziioannou, G., Domingues Dos Santos, F., & Tencé-Girault, S. (2020). Phase diagram of poly(VDF-ter-TrFE-ter-CTFE) copolymers: Relationship between crystalline structure and material properties. Polymer, Article number 123203 (sam) (hal)
  15. Benbara, N., Rebillat, M., & Mechbal, N. (2020). Bending waves focusing in arbitrary shaped plate-like structures: Application to spatial audio in cars. Journal of Sound and Vibration, 487, Article number 115587 (sam) (hal)
  16. Barkia, B., Aubry, P., Haghi-Ashtiani, P., Auger, T., Gosmain, L., Schuster, F., & Maskrot, H. (2020). On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation. Journal of Materials Science and Technology, 41, 209-218. (sam) (hal)
  17. Belkadi, F., Dhuieb, M. A., Aguado, J. V., Laroche, F., Bernard, A., & Chinesta, F. (2020). Intelligent assistant system as a context-aware decision-making support for the workers of the future. Computers and Industrial Engineering, 139, Article number 105732 (sam) (hal)
  18. Ben Ghorbal, G., Tricoteaux, A., Thuault, A., Ageorges, H., Roudet, F., & Chicot, D. (2020). Mechanical properties of thermally sprayed porous alumina coating by vickers and knoop indentation. Ceramics International, 46(12), 19843-19851. (sam) (hal)
  19. Bidron, G., Doghri, A., Malot, T., Fournier-dit-Chabert, F., Thomas, M., & Peyre, P. (2020). Reduction of the hot cracking sensitivity of CM-247LC superalloy processed by laser cladding using induction preheating. Journal of Materials Processing Technology, 277, Article number 11646. (sam) (hal)
  20. Beuguel, Q., Guinault, A., Chinesta, F., Sollogoub, C., & Miquelard-Garnier, G. (2020). Modeling of the rheological properties of multinanolayer films in the presence of compatibilized interphase. Journal of Rheology, 64(4), 981-989. (sam) (hal)
  21. Bian, Y., Colin, X., & Aressy, M. (2020). Thermal aging of high tenacity polyvinyl alcohol yarns. Polymer Degradation and Stability, 179, Article number 109277 (sam) (hal)
  22. Bonnet, P., Yastrebov, V. A., Queutey, P., Leroyer, A., Mangeney, A., Castelnau, O., . . . Montagner, J. -. (2020). Modelling capsizing icebergs in the open ocean. Geophysical Journal International, 223(2), 1265-1287.  (sam) (hal)
  23. Bouaziz, R., Truffault, L., Borisov, R., Ovalle, C., Laiarinandrasana, L., Miquelard-Garnier, G., & Fayolle, B. (2020). Elastic properties of polychloroprene rubbers in tension and compression during ageing. Polymers, 12(10), 1-14. (sam) (hal)
  24. Boussattine, Z., Ranc, N., & Palin-Luc, T. (2020). About the heat sources generated during fatigue crack growth: What consequences on the stress intensity factor? Theoretical and Applied Fracture Mechanics, 109 , Article number 102704 (sam) (hal)
  25. Castéran, F., Ibanez, R., Argerich, C., Delage, K., Chinesta, F., & Cassagnau, P. (2020). Application of machine learning tools for the improvement of reactive extrusion simulation. Macromolecular Materials and Engineering, 2 Article Number 000375 (sam (hal)
  26. Chinesta, F., Cueto, E., Abisset-Chavanne, E., Duval, J. L., & Khaldi, F. E. (2020). Virtual, digital and hybrid twins: A new paradigm in data-based engineering and engineered data. Archives of Computational Methods in Engineering, 27(1), 105-134. (sam) (hal)
  27. Colin, X., Essatbi, F., Delozanne, J., & Moreau, G. (2020). Towards a general kinetic model for the thermal oxidation of epoxy-diamine networks. effect of the molecular mobility around the glass transition temperature. Polymer Degradation and Stability, 181, Article number 109314 (sam) (hal)
  28. Courvoisier, Emilie., Bicaba, Yoann., Colin, Xavier . (2020). Consequences of oxidation on water absorption in PEEK and PEI matrices. Matériaux et Techniques, 108 (2) Article Number 205 (sam(hal)
  29. Cuenca, E., Ducousso, M., Rondepierre, A., Videau, L., Cuvillier, N., Berthe, L., Coulouvrat, F.Propagation of laser-generated shock waves in metals: 3D axisymmetric simulations compared to experiments (2020) Journal of Applied Physics, 128 (24), art. no. 244903,
  30. David, A., Huang, J., Richaud, E., & Yves Le Gac, P. (2020). Impact of thermal oxidation on mechanical behavior of polydicylopentadiene: Case of non-diffusion limited oxidation. Polymer Degradation and Stability, 179 , Article number 109294 (sam) (hal)
  31. De Francqueville, F., Gilormini, P., Diani, J., & Vandenbroucke, A. (2020). Relationship between local damage and macroscopic response of soft materials highly reinforced by monodispersed particles. Mechanics of Materials, 146 , Article number 103408 (sam) (hal)
  32. De Francqueville, F., Gilormini, P., Diani, J., & Vandenbroucke, A. (2020). Comparison of the finite strain macroscopic behavior and local damage of a soft matrix highly reinforced by spherical or polyhedral particles. European Journal of Mechanics, A/Solids, 84, Article number 104070 (sam) (hal)
  33. Dorhmi, K., Morin, L., Derrien, K., Hadjem-Hamouche, Z., & Chevalier, J. -. (2020). A homogenization-based damage model for stiffness loss in ductile metal-matrix composites. Journal of the Mechanics and Physics of Solids, 137, Article number 103812. (sam) (hal)
  34. Dupuis, A., Pesce, J. -., Ferreira, P., & Régnier, G. (2020). Fiber orientation and concentration in an injection-molded ethylene-propylene copolymer reinforced by hemp. Polymers, 12(12), 1-20. (sam) (hal)
  35. Ecault, R., Touchard, F., Berthe, L., Boustie, M. (2020) Laser shock adhesion test numerical optimization for composite bonding assessment. Composite Structures, 247, art. no. 112441. (sam) (hal)
  36. Essid, N., Eddhahak-Ouni, A., Neji, J. (2020) Experimental and Numerical Thermal Properties.  Investigation of Cement-Based Materials Modified with PCM for Building Construction Use. Journal of Architectural Engineering, 26 (3), art. no. 04020018 (sam) (hal)
  37. Fabbro, R. (2020). Depth dependence and keyhole stability at threshold, for different laser welding regimes. Applied Sciences (Switzerland), 10(4) , Article number 1487. (sam) (hal)
  38. Fernandes Nassar, S., Delpouve, N., Sollogoub, C., Guinault, A., Stoclet, G., Régnier, G., & Domenek, S. (2020). Impact of nanoconfinement on polylactide crystallization and gas barrier properties. ACS Applied Materials and Interfaces, 12(8), 9953-9965.  (sam) (hal)
  39. Ferreira, E., Dal, M., Colin, C., Marion, G., Gorny, C., Courapied, D., Guy, J., Peyre, P. (2020). Experimental and numerical analysis of gas/powder flow for different LMD nozzles. Metals, 10 (5), art. no. 667. (sam) (hal)
  40. Frahi,T., Yun, M., Argerich, C., Falco, A. , F. Chinesta. F. (2020). Tape Surfaces Characterization with Persistence Images. AIMS Materials Science, 7/4, 364-380. (sam) (hal)
  41. Germoso, C., Quaranta, G., Duval, J. L., & Chinesta, F. (2020). Non-intrusive in-plane-out-of-plane separated representation in 3D parametric elastodynamics. Computation, 8(3), Article number 78 (sam) (hal)
  42. Germoso, C., Duval, J. L., & Chinesta, F. (2020). Harmonic-modal hybrid reduced order model for the efficient integration of non-linear soil dynamics. Applied Sciences (Switzerland), 10(19 ,  Article number 6788(sam) (hal)
  43. Ghnatios, C., Simacek, P., Chinesta, F., & Advani, S. (2020). A non-local void dynamics modeling and simulation using the proper generalized decomposition. International Journal of Material Forming, 13(4), 533-546. (sam) (hal)
  44. González, D., García-González., Alberto ., Chinesta, F., & Cueto, E. (2020).  A Data-Driven Learning Method for Constitutive Modeling: Application to Vascular Hyperelastic Soft Tissues. Materials 13(10), Article number 2319 (sam) (hal)
  45. González, D., Chinesta, F., & Cueto, E. (2020). Learning non-markovian physics from data. Journal of Computational Physics, Article number 109982 (sam) (hal)
  46. Guenoun, G., Faou, J. -., Régnier, G., Schmitt, N., & Roux, S. (2020). PTFE crystallization mechanisms: Insight from calorimetric and dilatometric experiments. Polymer, 193 , Article number 122333. (sam) (hal)
  47. Guinebretiere Rene., Arnaud, Stephan ., Blanc, Nils ., Boudet, Nathalie ., Thune, Elsa  .,  Babonneau, David ., Castelnau, Olivier (2020) Full reciprocal-space mapping up to 2000 K under controlled atmosphere: the multipurpose QMAX furnace JOURNAL OF APPLIED CRYSTALLOGRAPHY (53) 650-661. (sam) (hal)
  48. Hashemi, F., Rizi, H. B., Gheisari, K., Motamedi, H., Pereira, M., & Shirinbayan, M. (2020). Investigation of magnetic composites using as photocatalyst and antibacterial application. Inorganic Chemistry Communications, 119 , Article number 108031 (sam) (hal)
  49. Hernández, Q., Badías, A., González, D., Chinesta, F., & Cueto, E. (2020). Structure-preserving neural networks. Journal of Computational Physics, Article number 106689 (sam) (hal)
  50. Huang, J., Minne, W., Drozdzak, R., Recher, G., Le Gac, P. Y., & Richaud, E. (2020). Thermal oxidation of poly(dicyclopentadiene) – decomposition of hydroperoxides. Polymer Degradation and Stability, 174, Article number 109102. (sam) (hal)
  51. Huang, J., Derue, I., Yves Le Gac, P., & Richaud, E. (2020). Thermal oxidation of polydicyclopentadiene - changes in water absorption. Polymer Degradation and Stability, 180, Article number 109219 (sam) (hal)
  52. Ibañez, R., Casteran, F., Argerich, C., Ghnatios, C., Hascoet, N., Ammar, A., . . . Chinesta, F. (2020). On the data-driven modeling of reactive extrusion. Fluids, 5(2) , Article number 94 (sam) (hal)
  53. Imaddahen, M. A., Shirinbayan, M., Ayari, H., Foucard, M., Tcharkhtchi, A., & Fitoussi, J. (2020). Multi-scale analysis of short glass fiber-reinforced polypropylene under monotonic and fatigue loading. Polymer Composites, 41(11), 4649-4662.  (sam) (hal)
  54. Jilani, W., Fourati, N., Zerrouki, C., Faugeras, P. -., Guinault, A., Zerrouki, R., & Guermazi, H. (2020). Exploring the structural properties and enhancement of opto-electrical investigations for the synthesized epoxy based polymers with local nanoscale structures. Materials Research Express, 7(3) , Article number 035305. (sam) (hal)
  55. Labardi, M., Bertolla, A., Sollogoub, C., Casalini, R., Capaccioli, S., Capaccioli, S., & Capaccioli, S. (2020). Lateral resolution of electrostatic force microscopy for mapping of dielectric interfaces in ambient conditions. Nanotechnology, 31(33, Article number 335710 (sam) (hal)
  56. Lamri, A., Shirinbayan, M., Pereira, M., Truffault, L., Fitoussi, J., Lamouri, S., . . . Tcharkhtchi, A. (2020). Effects of strain rate and temperature on the mechanical behavior of high-density polyethylene. Journal of Applied Polymer Science, 137(23), Article number 48778 (sam) (hal)
  57. Laribi, M.A., Tamboura, S., Fitoussi, J., Shirinbayan, M., Bi, R.T., Tcharkhtchi, A., Dali, H.B. (2020) Microstructure dependent fatigue life prediction for short fibers reinforced composites: Application to sheet molding compounds. International Journal of Fatigue, 138, art. no. 105731. (sam) (hal)
  58. Laribi, M. A., TieBi, R., Tamboura, S., Shirinbayan, M., Tcharkhtchi, A., Dali, H. B., & Fitoussi, J. (2020). Sheet molding compound automotive component reliability using a micromechanical damage approach. Applied Composite Materials, 27(5), 693-715 (sam) (hal)
  59. Lavisse, L., Kanjer, A., Berger, P., Optasanu, V., Gorny, C., Peyre, P., . . . Marco de Lucas, M. C. (2020). High temperature oxidation resistance and microstructure of laser-shock peened ti-beta-21S. Surface and Coatings Technology, 403, Article number 126368 (sam) (hal)
  60. Le Goupil, F., Kallitsis, K., Tencé-Girault, S., Pouriamanesh, N., Brochon, C., Cloutet, E., . . . Hadziioannou, G. (2020). Enhanced electrocaloric response of vinylidene Fluoride–Based polymers via one-step molecular engineering. Advanced Functional Materials, Article Number: 2007043 (sam ) (hal)
  61. Lheritier, P., Vaxelaire, N., Tencé-Girault, S., Domingues Dos Santos, F., & Defay, E. (2020). Influence of field-induced phase transition on poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) strain. Physical Review Applied, 14(4), Article number 044061 (sam) (hal)
  62. Liu, C., Lafdi, K., & Chinesta, F. (2020). Durability sensor using low concentration carbon nano additives. Composites Science and Technology, 195 , Article number 108200. (sam(hal)
  63. Loyer, C., Régnier, G., Duval, V., Ould, Y., & Richaud, E. (2020). PBT plasticity loss induced by oxidative and hydrolysis ageing. Polymer Degradation and Stability, 181 Article number 109368. (sam(hal)
  64. Luo, Y. -., Chevalier, L., Monteiro, E., Yan, S., & Menary, G. (2020). Simulation of the injection stretch blow molding process: An anisotropic visco-hyperelastic model for polyethylene terephthalate behavior. Polymer Engineering and Science, 60(4), 823-831. (sam) (hal)
  65. Marti, N., Favier, V., Gregori, F., & Saintier, N. (2020). Correlation of the low and high frequency fatigue responses of pure polycrystalline copper with mechanisms of slip band formation. Materials Science and Engineering A, 772 , Article number 138619  (sam) (hal)
  66. Mayi, Y. A., Dal, M., Peyre, P., Bellet, M., Metton, C., Moriconi, C., & Fabbro, R. (2020). Laser-induced plume investigated by finite element modelling and scaling of particle entrainment in laser powder bed fusion. Journal of Physics D: Applied Physics, 53(7), Article number 075306. (sam) (hal)
  67. Messin, T., Marais, S., Follain, N., Guinault, A., Gaucher, V., Delpouve, N., & Sollogoub, C. (2020). Biodegradable PLA/PBS multinanolayer membrane with enhanced barrier performances. Journal of Membrane Science, 598 , Article number 117777. (sam) (hal)
  68. Messager, A., Junet, A., Palin-Luc, T., Buffiere, J. -., Saintier, N., Ranc, N., Bonin, A., Nadot, Y. (2020). In situ synchrotron ultrasonic fatigue testing device for 3D characterisation of internal crack initiation and growth. Fatigue and Fracture of Engineering Materials and Structures, 43(3), 558-567.  (sam) (hal)
  69. Mofakhami, E., Tencé-Girault, S., Perrin, J., Scheel, M., Gervat, L., Ovalle, C., .Miquelard-Garnier, G. (2020). Microstructure-mechanical properties relationships in vibration welded glass-fiber-reinforced polyamide 66: A high-resolution X-ray microtomography study. Polymer Testing, 85 , Article number 106454. (sam) (hal)
  70. Montagud, S., Aguado, J. V., Chinesta, F., & Joyot, P. (2020). Parametric inverse impulse response based on reduced order modeling and randomized excitations. Mechanical Systems and Signal Processing, 135 , Article number 106392. (sam) (hal)
  71. Morin, L., Gilormini, P., & Derrien, K. (2020). Generalized euclidean distances for elasticity tensors. Journal of Elasticity, 138(2), 221-232. (sam) (hal)
  72. Morin, L., Brenner, R., & Suquet, P. (2019). Numerical simulation of model problems in plasticity based on field dislocation mechanics. Modelling and Simulation in Materials Science and Engineering, 27(8) , Article number 085012 (sam) (hal)
  73. Moya, B., Alfaro, I., Gonzalez, D., Chinesta, F., & Cueto, E. (2020). Physically sound, self-learning digital twins for sloshing fluids. PloS One, 15(6), Page e0234569 (sam) (hal)
  74. Nguyen, A. N., Solard, J., Nong, H. T. T., Osman, C. B., Gomez, A., Bockelée, V., Tencé-Girault, S.,  Mercone, S. (2020). Spin coating and micro-patterning optimization of composite thin films based on PVDF. Materials, 13(6) , Article number 1342 (sam) (hal)
  75. Okamba-Diogo, O., Fernagut, F., Guilment, J., Pery, F., Fayolle, B., & Richaud, E. (2020). Thermal stabilization of polyamide 11 by phenolic antioxidants. Polymer Degradation and Stability, 179 , Article number 109206 (sam) (hal)
  76. Ouallam, S., Masse, J. E., Peyre, P., Djeghlal, M. L., Guittonneau, F., Boutaghou, Z., & Kaba, L. (2020). Microstructural and mechanical characterization of the yb: YAG laser welding of high-pressure die-casting mg-al-mn magnesium alloy. International Journal of Engineering Research in Africa, 51, 95-109. (sam) (hal)
  77. Panthier, F., Germain, T., Berthe, L., Doizi, S., & Traxer, O. (2020). Comparaison in vitro de l’efficacité statique ou dynamique des lasers holmium :YAG et thulium fibré pour la lithotritie endocorporelle : Impact de la vitesse de déplacement. Progres En Urologie : Journal De l'Association Francaise d'Urologie Et De La Societe Francaise d'Urologie, 30(13), 711. (sam) (hal)
  78. Panthier, F., Lapouge, P., Doizi, S., Dragos, L., Berthe, L., & Traxer, O. (2020). Analyse in vitro de l’efficacité de la lithotritie laser : Quel modèle utiliser ? Progres En Urologie : Journal De l'Association Francaise d'Urologie Et De La Societe Francaise d'Urologie, 30(13), 709-710. (sam) (hal)
  79. Panthier, F., Traxer, O., Yonneau, L., Lebret, T., Berthe, L., Timsit, M. O., . . . Audenet, F. (2020). Évaluation préclinique et clinique d’un outil développé pour la planification opératoire des chirurgies lithiasiques : « Kidney stone calculator ». Progres En Urologie : Journal De l'Association Francaise d'Urologie Et De La Societe Francaise d'Urologie, 30(13), 702-703. (sam(hal)
  80. Panthier, F., Ventimiglia, E., Berthe, L., Chaussain, C., Daudon, M., Doizi, S., & Traxer, O. (2020). How much energy do we need to ablate 1 mm3 of stone during ho:YAG laser lithotripsy? an in vitro study. World Journal of Urology, 38(11), 2945-2953 (sam) (hal)
  81. Panthier, F., Doizi, S., Illoul, L., Berthe, L., & Traxer, O. (2020). Developing free three-dimensional software for surgical planning for kidney stones: Volume is better than diameter. Journal of Cleaner Production, 7. {3}. 589-590
  82. Perez, M., Prono, D., Ghnatios, C., Abisset, E., Duval, J. L., & Chinesta, F. (2020). Advanced modeling and simulation of sheet moulding compound (SMC) processes. International Journal of Material Forming, 13(5), 675-685. (sam) (hal)
  83. Pinault, H., Arlaud, E., & Balmes, E. (2020). A general superelement generation strategy for piecewise periodic media. Journal of Sound and Vibration, 469 , Article number 115133. (sam) (hal)
  84. Pingulkar, H., Peixinho, J., & Crumeyrolle, O. (2020). Drop dynamics of viscoelastic filaments. Physical Review Fluids, 5(1) , Article number 011301. (sam) (hal)
  85. Quaranta, G., Haug, E., Duval, J. L., & Chinesta, F. (2020). Parametric evaluation of part distortion in additive manufacturing processes. International Journal of Material Forming, 13(1), 29-41. (sam) (hal)
  86. Rébillat, M., & Mechbal, N. (2020). Damage localization in geometrically complex aeronautic structures using canonical polyadic decomposition of lamb wave difference signal tensors. Structural Health Monitoring, 19(1), 305-321.  (sam) (hal)
  87. Rodriguez, A. K., Mansoor, B., Ayoub, G., Colin, X., & Benzerga, A. A. (2020). Effect of UV-aging on the mechanical and fracture behavior of low density polyethylene. Polymer Degradation and Stability, 180, Article number 109185 (sam) (hal)
  88. Roscol, V. Dubent, S., Bensalah, W., Mierzejewski, S ., Ottenio, R ., Depetris-Wery M .,and Ayed, H F Application of an experimental design to study AISI 4340 and 300Msteels electropolishing in a concentrated perchloric/acetic acidsolution Engineering Research ExpressArticle number 035007 (sam) (hal)
  89. Saoudi, A., Aissani, L., Sorba, G., & Chinesta, F. (2020). Kinetic monte carlo simulation of random deposition and scaling behavior with respect to the germination length. International Journal of Computational Materials Science and Engineering, Article number 2050022(sam) (hal)
  90. Scheuer, A., Grégoire, G., Abisset-Chavanne, E., Chinesta, F., & Keunings, R. (2020). Modelling the effect of particle inertia on the orientation kinematics of fibres and spheroids immersed in a simple shear flow. Computers and Mathematics with Applications, 79(3), 539-554.  (sam) (hal)
  91. Scius-Bertrand, M., Videau, L., Rondepierre, A., Lescoute, E., Rouchausse, Y., Kaufman, J., . Berthe, L. (2020). Laser induced plasma characterization in direct and water confined regimes: New advances in experimental studies and numerical modelling. Journal of Physics D: Applied Physics, 54(5) Article number 055204 (sam(hal)
  92. Serratore, G., Gagliardi, F., Martín, C. A., Pinilo, R. I., Cueto, E., Filice, L., & Chinesta, F. (2020). A novel sensitivity analysis on friction spot joining process performed on aluminum\polycarbonate sheets by simulation. International Journal of Material Forming, 13(5), 737-747.  (sam) (hal)
  93. Sow, M. C., De Terris, T., Castelnau, O., Hamouche, Z., Coste, F., Fabbro, R., & Peyre, P. (2020). Influence of beam diameter on laser powder bed fusion (L-PBF) process. Additive Manufacturing, 36 , Article number 101532 (sam) (hal)
  94. Suraci, S. V., Fabiani, D., Mazzocchetti, L., & Giorgini, L. (2020). Degradation assessment of polyethylene-based material through electrical and chemical-physical analyses. Energies, 13(3), Article number 650 (sam) (hal)
  95. Suraci, S. V., Fabiani, D., Xu, A., Roland, S., & Colin, X. (2020). Ageing assessment of XLPE LV cables for nuclear applications through physico-chemical and electrical measurements. IEEE Access, 8, 27086-27096. (sam) (hal)
  96. Tamboura, S., Ayari, H., Shirinbayan, M., Laribi, M. A., Bendaly, H., Sidhom, H., Fitoussi, J. (2020). Experimental and numerical multi-scale approach for sheet-molding-compound composites fatigue prediction based on fiber-matrix interface cyclic damage. International Journal of Fatigue, 135 , Article number 105526. (sam) (hal)
  97. Tamboura, S., Laribi, M.A., Fitoussi, J., Shirinbayan, M., Bi, R.T., Tcharkhtchi, A., Dali, H.B. (2020). Damage and fatigue life prediction of short fiber reinforced composites submitted to variable temperature loading: Application to Sheet Molding Compound composites . International Journal of Fatigue, 138, art. no. 105676. (sam) (hal)
  98. Thuau, D., Kallitsis, K., Ha, S., Bargain, F., Soulestin, T., Pecastaings, G., Tencé-Girault, S.,  Hadziioannou, G. (2020). High and temperature-independent dielectric constant dielectrics from PVDF-based terpolymer and copolymer blends. Advanced Electronic Materials, 6(3), Article number 1901250  (sam) (hal)
  99. Trân, T. H., Debarnot, D., & Richaud, E. (2020). Thermal oxidative stability of polyanilines. Polymer Testing, 81 Article number 106187 (sam) (hal)
  100. Vanaei, H. R., Raissi, K., Deligant, M., Shirinbayan, M., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2020). Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts. Journal of Materials Science, 55(29), 14677-14689. (sam) (hal)
  101. Vanaei, H., Shirinbayan, M., Deligant, M., Raissi, K., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2020). Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication. Polymer Engineering and Science, 60(8), 1822-1831. (sam) (hal)
  102. Varol, N., Delpouve, N., Araujo, S., Domenek, S., Guinault, A., Golovchak, R., Ingram, A.,. Dargent, E. (2020). Amorphous rigidification and cooperativity drop in semi−crystalline plasticized polylactide. Polymer, 194 , Article number 122373 (sam) (hal)
  103. Vasikaran, E., Charles, Y., & Gilormini, P. (2020). Implementation of a reaction-diffusion process in the abaqus finite element software. Mechanics and Industry, 21(5), Article number 508 (sam) (hal)
  104. Vermiglio, S., Champaney, V., Sancarlos, A., Daim, F., Kedzia, J. C., Duval, J. L., . . . Chinesta, F. (2020). Parametric electromagnetic analysis of radar-based advanced driver assistant systems. Sensors (Switzerland), 20(19), 1-15. (sam) (hal)
  105. Viard, A. -., Dirrenberger, J., & Forest, S. (2020). Propagating material instabilities in planar architectured materials. International Journal of Solids and Structures, 202, 532-551. (sam) (hal)
  106. Xu, A., Roland, S., & Colin, X. (2020). Physico-chemical characterization of the blooming of irganox 1076® antioxidant onto the surface of a silane-crosslinked polyethylene. Polymer Degradation and Stability, 171 , Article number 109046 (sam) (hal)
  107. Xu, A., Roland, S., & Colin, X. (2020). Thermal ageing of a silane-crosslinked polyethylene stabilised with a thiodipropionate antioxidant. Polymer Degradation and Stability, 181, Article number 109276 (sam(hal)
  108. Yun, M., Argerich - Martin, C. , Gilormini, P., Chinesta, F., & Advani, S. (2020). Learning the macroscopic flow model of short fiber suspensions from fine-scale simulated data. Entropy, 22(1), 30. (sam) (hal)
  109. Yun, M., Argerich, C., Cueto, E., Duval, J.L., Chinesta, F. (2020). Nonlinear regression operating on microstructures described from topological data analysis for the real-time prediction of effective properties. Materials, 13 (10), art. no. 2335. (sam) (hal)
  110. Zuo, P., Tcharkhtchi, A., Fitoussi, J., Shirinbayan, M., & Bakir, F. (2020). Multiscale thermal study of virgin and aged polyphenylene sulfide reinforced by glass fiber. Journal of Applied Polymer Science, Article number 49031. (sam) (hal)
  111.  Zuo, P., Tcharkhtchi, A., Shirinbayan, M., Fitoussi, J., & Bakir, F. (2020). Effect of thermal aging on crystallization behaviors and dynamic mechanical properties of glass fiber reinforced polyphenylene sulfide (PPS/GF) composites. Journal of Polymer Research, 27(3) Article number 77 (sam) (hal)