1. Al Jallad, M., Atassi, Y., Mounif, E., Aressy, M., & Tcharkhtchi, A. (2014). Oxidative solution polymerization of aniline hydrochloride onto electrospun nanofibers mats of polylactic acid: Preparation method and characterization. Journal of Applied Polymer Science, 132(11) (sam) (hal)
  2. Arif, M. F., Saintier, N., Meraghni, F., Fitoussi, J., Chemisky, Y., & Robert, G. (2014). Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66. Composites Part B: Engineering, 61, 55-65. (sam) (hal)
  3. Arrieta, J. S., Diani, J., & Gilormini, P. (2014). Experimental and modelling studies of the shape memory properties of amorphous polymer network composites. Smart Materials and Structures, 23(9). (sam) (hal)
  4. Arrieta, S., Diani, J., & Gilormini, P. (2014). Experimental characterization and thermoviscoelastic modeling of strain and stress recoveries of an amorphous polymer network. Mechanics of Materials, 68, 95-103. (sam) (hal)
  5. Arrieta, J. S., Diani, J., & Gilormini, P. (2014). Cyclic and monotonic testing of free and constrained recovery properties of a chemically crosslinked acrylate. Journal of Applied Polymer Science, 131(2) (sam) (hal)
  6. Ben Hassine, M., Naït-Abdelaziz, M., Zaïri, F., Colin, X., Tourcher, C., & Marque, G. (2014). Time to failure prediction in rubber components subjected to thermal ageing: A combined approach based upon the intrinsic defect concept and the fracture mechanics. Mechanics of Materials, 79, 15-24. (sam) (hal)
  7. Berthe, L., Gay, E., Boustie, M., Buzaud, E., Arrigoni, M., Ecault, R., & Touchard, F. (2014). Study of adhesion test by shock. application to bonded joint. [Étude sur l'essai d'adhérence par choc des composites: Application aux assemblages collés] Revue Des Composites Et Des Materiaux Avances, 24(4), 403-412. doi:10.3166/RCMA.24.403-412 (sam) (hal)
  8. Cui, Z., Coletta, C., Dazzi, A., Lefrancois, P., Gervais, M., Néron, S., & Remita, S. (2014). Radiolytic method as a novel approach for the synthesis of nanostructured conducting polypyrrole. Langmuir, 30(46), 14086- (sam) (hal)
  9. Dal, M., Le Masson, P., & Carin, M. (2014). A model comparison to predict heat transfer during spot GTA welding. International Journal of Thermal Sciences, 75, 54-64. (sam) (hal)
  10. Dausseins, J., El-Mazry, C., Mallet, J., Colin, X., & Correc, O. (2014). Accelerated ageing method with chlorine dioxide. application to additive free polyamide 66. [Méthode de vieillissement accéléré au dioxyde de chlore] Techniques - Sciences - Methodes, (5), 63-75. (sam) (hal)
  11. Diani, J., & Gilormini, P. (2014). Using a pattern-based homogenization scheme for modeling the linear viscoelasticity of nano-reinforced polymers with an interphase. Journal of the Mechanics and Physics of Solids, 63(1), 51-61. (sam) (hal)
  12. Diani, J., Gilormini, P., & Agbobada, G. (2014). Experimental study and numerical simulation of the vertical bounce of a polymer ball over a wide temperature range. Journal of Materials Science, 49(5), 2154-2163. (sam) (hal)
  13. Diaz, R., Diani, J., Gilormini, P. (2014) Physical interpretation of the Mullins softening in a carbon-black filled SBR Polymer (United Kingdom), 55(19), pp. 4942-4947. (sam) (hal)
  14. Dirrenberger, J., Forest, S., & Jeulin, D. (2014). Towards gigantic RVE sizes for 3D stochastic fibrous networks. International Journal of Solids and Structures, 51(2), 359-376. (sam) (hal)
  15. Ecault, R., Boustie, M., Berthe, L., Touchard, F., Chocinski-Arnault, L., Voillaume, H., & Campagne, B. (2014). Development of the laser shock wave adhesion test on bonded CFRP composite. International Journal of Structural Integrity, 5(4), 253-261. (sam) (hal)
  16. Ecault, R., Touchard, F., Boustie, M., Berthe, L., Voillaume, H., & Campagne, B. (2014). Experimental study of laser shock wave effects on bonded CFRP composite in case of a weak bond. [Étude expérimentale des effets d'un choc laser sur des assemblages collés de composites dans le cas d'un joint faible] Revue Des Composites Et Des Materiaux Avances, 24(1), 53-66. (sam) (hal)
  17. Ehrhart, B., Ecault, R., Touchard, F., Boustie, M., Berthe, L., Bockenheimer, C., & Valeske, B. (2014). Development of a laser shock adhesion test for the assessment of weak adhesive bonded CFRP structures. International Journal of Adhesion and Adhesives, 52, 57-65 (sam) (hal)
  18. El Yagoubi, J., Lubineau, G., Traidia, A., & Verdu, J. (2014). Monitoring and simulations of hydrolysis in epoxy matrix composites during hygrothermal aging. Composites Part A: Applied Science and Manufacturing, 68, 184 192. (sam) (hal)
  19. El Yagoubi, J., Lubineau, G., Saghir, S., Verdu, J., Askari, A. (2014). Thermomechanical and hygroelastic properties of an epoxy system under humid and cold-warm cycling conditions. Polymer Degradation and Stability, 99 (1), 146-155. (sam) (hal)
  20. François-Heude, A., Richaud, E., Desnoux, E., & Colin, X. (2014). Influence of temperature, UV-light wavelength and intensity on polypropylene photothermal oxidation. Polymer Degradation and Stability, 100(1), 10-20. (sam) (hal)
  21. Gay, E., Berthe, L., Boustie, M., Arrigoni, M., & Trombini, M. (2014). Study of the response of CFRP composite laminates to a laser-induced shock. Composites Part B: Engineering, 64, 108-115. (sam) (hal)
  22. Gay, E., Berthe, L., Boustie, M., Arrigoni, M., & Buzaud, E. (2014). Effects of the shock duration on the response of CFRP composite laminates. Journal of Physics D: Applied Physics, 47(45). (sam) (hal)
  23. Gharbi, M., Peyre, P., Gorny, C., Carin, M., Morville, S., Le Masson, P., Fabbro, R. (2014). Influence of a pulsed laser regime on surface finish induced by the direct metal deposition process on a Ti64 alloy. Journal of Materials Processing Technology, 214(2), 485-495. (sam) (hal)
  24. Gilormini, P., Richaud, E., & Verdu, J. (2014). A statistical theory of polymer network degradation. Polymer (United Kingdom), 55(16), 3811-3817. (sam) (hal)
  25. Guinard, C., Montay, G., Guipont, V., Jeandin, M., Girardot, J., & Schneider, M. (2014). Residual stress analysis of laser-drilled thermal barrier coatings involving various bond coats. Journal of Thermal Spray Technology, 24(1-2), 252-262. (sam) (hal)
  26. Heiligenstein, X., Heiligenstein, J., Delevoye, C., Hurbain, I., Bardin, S., Paul-Gilloteaux, P., Raposo, G. Sengmanivong, L., Régnier, G., (2014). The CryoCapsule: Simplifying correlative light to electron microscopy. Traffic, 15(6), 700-716. (sam) (hal)
  27. Hernández, C., Figueroa, I.A., Alfonso, I., Braham, C., Castillo, P., Gonzalez, G. (2014). Microstructure and texture evolution of the Al-20sn alloy processed by equal-channel angular pressing using route C. Materials Transactions, 56 (1), 40-45. (sam) (hal)
  28. Kurek, M., Guinault, A., Voilley, A., Galić, K., & Debeaufort, F. (2014). Effect of relative humidity on carvacrol release and permeation properties of chitosan based films and coatings. Food Chemistry, 144, 9-17. (sam) (hal)
  29. Lamoureux, B., Mechbal, N., & Massé, J. -. (2014). A combined sensitivity analysis and kriging surrogate modeling for early validation of health indicators. Reliability Engineering and System Safety, 130, 12-26. (sam) (hal)
  30. Le Gac, P. Y., Broudin, M., Roux, G., Verdu, J., Davies, P., & Fayolle, B. (2014). Role of strain induced crystallization and oxidative crosslinking in fracture properties of rubbers. Polymer (United Kingdom), 55(10), 2535-2542. (sam) (hal)
  31. Le Gac, P. Y., Roux, G., Davies, P., Fayolle, B., & Verdu, J. (2014). Water clustering in polychloroprene. Polymer (United Kingdom), 55(12), 2861-2866. (sam) (hal)
  32. Le Gac, P. Y., Roux, G., Verdu, J., Davies, P., & Fayolle, B. (2014). Oxidation of unvulcanized, unstabilized polychloroprene: A kinetic study. Polymer Degradation and Stability, 109, 175-183. (sam) (hal)
  33. Li, X., Mckenna, G. B., Miquelard-Garnier, G., Guinault, A., Sollogoub, C., Regnier, G., & Rozanski, A. (2014). Forced assembly by multilayer coextrusion to create oriented graphene reinforced polymer nanocomposites. Polymer (United Kingdom), 55(1), 248-257. (sam) (hal)
  34. Mabrouk, W., Ogier, L., Vidal, S., Sollogoub, C., Matoussi, F., & Fauvarque, J. F. (2014). Ion exchange membranes based upon crosslinked sulfonated polyethersulfone for electrochemical applications. Journal of Membrane Science, 452, 263-270. (sam) (hal)
  35. Massat, J.-P., Laurent, C.. Bianchi, J.-P. and Balmes, E. Pantograph catenary dynamic optimisation based on advanced multibody and finite element co-simulation tools, Vehicle Systems Dynamics,  52(1), pp. 338–354. (sam) (hal)
  36. Mezlini, S., Mzali, S., Sghaier, S., Braham, C., & Kapsa, P. (2014). Effect of a combined machining/burnishing tool on the roughness and mechanical properties. Lubrication Science, 26(3), 175-187. (sam) (hal)
  37. Montagnat, M., Castelnau, O., Bons, P. D., Faria, S. H., Gagliardini, O., Gillet-Chaulet, F.,Suquet, P. (2014). Multiscale modeling of ice deformation behavior. Journal of Structural Geology, 61, 78-108. (sam) (hal)
  38. Muller, M., El-Rabii, H., & Fabbro, R. (2014). Laser ignition of bulk iron, mild steel, and stainless steel in oxygen atmospheres. Combustion Science and Technology, 186(7), 953-974. (sam) (hal)
  39. Nafie, N., Braham, C., Ben Rabha, M., & Bouaicha, M. (2014). Effect of the experimental parameters on the shape and formation kinetics of SiNWs formed by electroless chemical etching in aqueous AgNO3/HF/H2O2 solution. Physica Status Solidi (C) Current Topics in Solid State Physics, 11(2), 331-336. (sam) (hal)
  40. Nistor, M., Seiler, W., Hebert, C., Matei, E., & Perrière, J. (2014). Effects of substrate and ambient gas on epitaxial growth indium oxide thin films. Applied Surface Science, 307, 455-460. (sam) (hal)
  41. Okamba-Diogo, O., Richaud, E., Verdu, J., Fernagut, F., Guilment, J., & Fayolle, B. (2014). Molecular and macromolecular structure changes in polyamide 11 during thermal oxidation. Polymer Degradation and Stability, 108, 123-132. (sam) (hal)
  42. Perrière, J., Hebert, C., Jedrecy, N., Seiler, W., Zanellato, O., Portier, X.,. Nistor, M. (2014). On the relevance of large scale pulsed-laser deposition: Evidence of structural heterogeneities in ZnO thin films. Journal of Applied Physics, 116(12) (sam) (hal)
  43. Peyre, P., Berthe, L., Dal, M., Pouzet, S., Sallamand, P., & Tomashchuk, I. (2014). Generation and characterization of T40/A5754 interfaces with lasers. Journal of Materials Processing Technology, 214(9), 1946-1953. (sam) (hal)
  44. Phung, N. L., Favier, V., Ranc, N., Valès, F., & Mughrabi, H. (2014). Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings. International Journal of Fatigue, 63, 68-77. (sam) (hal)
  45. Potier, F., Guinault, A., Delalande, S., Sanchez, C., Ribot, F., & Rozes, L. (2014). Nano-building block based-hybrid organic-inorganic copolymers with self-healing properties. Polymer Chemistry, 5(15), 4474-4479. (sam) (hal)
  46. Ranc, N., Palin-Luc, T., Paris, P. C., & Saintier, N. (2014). About the effect of plastic dissipation in heat at the crack tip on the stress intensity factor under cyclic loading. International Journal of Fatigue, 58, 56-65. (sam) (hal)
  47. Rasselet, D., Ruellan, A., Guinault, A., Miquelard-Garnier, G., Sollogoub, C., & Fayolle, B. (2014). Oxidative degradation of polylactide (PLA) and its effects on physical and mechanical properties. European Polymer Journal, 50(1), 109-116 (sam) (hal)
  48. Raterron, P., Detrez, F., Castelnau, O., Bollinger, C., Cordier, P., & Merkel, S. (2014). Multiscale modeling of upper mantle plasticity: From single-crystal rheology to multiphase aggregate deformation. Physics of the Earth and Planetary Interiors, 228, 232-243. (sam) (hal)
  49. Rébillat, M., Benichoux, V., Otani, M., Keriven, R., & Brette, R. (2014). Estimation of the low-frequency components of the head-related transfer functions of animals from photographs. Journal of the Acoustical Society of America, 135(5), 2534-2544. (sam) (hal)
  50. Rébillat, M., Hajrya, R., & Mechbal, N. (2014). Nonlinear structural damage detection based on cascade of hammerstein models. Mechanical Systems and Signal Processing, 48(1-2), 247-259. (sam) (hal)
  51. Richaud, E. (2014). Comparison of stabilization by vitamin E and 2,6-di-tert-butylphenols during polyethylene radio-thermal-oxidation. Radiation Physics and Chemistry, 103, 158-166. (sam) (hal)
  52. Richaud, E., Le Gac, P. Y., & Verdu, J. (2014). Thermooxidative aging of polydicyclopentadiene in glassy state. Polymer Degradation and Stability, 102(1), 95-104. (sam) (hal)
  53. Richaud, E., Gilormini, P., Coquillat, M., & Verdu, J. (2014). Crosslink density changes during the hydrolysis of tridimensional polyesters. Macromolecular Theory and Simulations, 23(5), 320-330. (sam) (hal)
  54. Seisson, G., Hébert, D., Bertron, I., Chevalier, J. -., Hallo, L., Lescoute, E., Berthe, L. (2014). Dynamic cratering of graphite: Experimental results and simulations. International Journal of Impact Engineering, 63, 18-28. (sam) (hal)
  55. Seisson, G., Hébert, D., Hallo, L., Chevalier, J. -., Guillet, F., Berthe, L., & Boustie, M. (2014). Penetration and cratering experiments of graphite by 0.5-mm diameter steel spheres at various impact velocities. International Journal of Impact Engineering, 70, 14-20. (sam) (hal)
  56. Shabani, A., Colin, X., Marque, G., & Monchy-Leroy, C. (2014). Peroxide cross-linking of EPDMs having high fractions of ethylenic units. Rubber Chemistry and Technology, 87(4), 679-702. (sam) (hal)
  57. Sidhom, N., Makhlouf, K., Khlifi, A., Braham, C., & Sidhom, H. (2014). Assessment of low cycle fatigue improvement of machined AISI 316 stainless steel by brush hammering. Fatigue and Fracture of Engineering Materials and Structures, 37(10), 1087-1100. (sam) (hal)
  58. Sidhom, N., Moussa, N.B., Janeb, S., Braham, C., Sidhom, H. Potential fatigue strength improvement of AA 5083-H111 notched parts by wire brush hammering: Experimental analysis and numerical simulation Materials and Design, 64, pp. 503-519. (sam) (hal)
  59. Tcharkhtchi, A., Abdallah-Elhirtsi, S., Ebrahimi, K., Fitoussi, J., Shirinbayan, M., & Farzaneh, S. (2014). Some new concepts of shape memory effect of polymers. Polymers, 6(4), 1144-1163. (sam) (hal)
  60. Tcharkhtchi, A., Farzaneh, S., Abdallah-Elhirtsi, S., Esmaeillou, B., Nony, F., & Baron, A. (2014). Thermal aging effect on mechanical properties of polyurethane. International Journal of Polymer Analysis and Characterization, 19(7), 571-584. (sam) (hal)
  61. Vo Van, O. , Massat, J.-P.  Laurent, C. and Balmes, E.  (2014). “Introduction of variability into pantograph–catenary dynamic simulations, Vehicle Systems Dynamics,  52(10), pp. 1254–1269. (sam) (hal
  62. Yahyaoui, H., Sidhom, H., Braham, C., & Baczmanski, A. (2014). Effect of interlamellar spacing on the elastoplastic behavior of C70 pearlitic steel: Experimental results and self-consistent modeling. Materials and Design, 55, 888-897. (sam) (hal)
  63. Zahra, Y., Djouani, F., Fayolle, B., Kuntz, M., & Verdu, J. (2014). Thermo-oxidative aging of epoxy coating systems. Progress in Organic Coatings, 77(2), 380-387. (sam) (hal)
  64. Zaimova D., Bayraktar E., Miskioglu I., Katundi D., & Hamouche Z. (2014). Manufacturing and damage analysis of filler reinforced epoxy-based composites. International Journal of Materials and Product Technology, 48(1-4), 47-65. (sam) (hal)