1. Arlaud, E., Costa D'Aguiar, S., Balmes, E. Receptance of railway tracks at low frequency: Numerical and experimental approaches (2016) Transportation Geotechnics, 9, pp. 1-16. (sam) (hal)
  2. Arrieta, J.S., Richaud, E., Fayolle, B., Nizeyimana, F. Thermal oxidation of vinyl ester and unsaturated polyester resins(2016) Polymer Degradation and Stability, 129, pp. 142-155. (sam) (hal)
  3. Atkinson, H.V., Favier, V.  Does Shear Thickening Occur in Semisolid Metals? (2016) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (4), pp. 1740-1750. (sam) (hal)
  4. Baczmański, A., Zhao, Y., Gadalińska, E., Le Joncour, L., Wroński, S., Braham, C., Panicaud, B., François, M., Buslaps, T., Soloducha, K.  Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model (2016) International Journal of Plasticity, 81, pp. 102-122. (sam) (hal)
  5. Bartczak, Z., Grala, M., Richaud, E., Gadzinowska, K. Erosion of the molecular network in the amorphous layers of polyethylene upon high- strain deformation(2016) Polymer (United Kingdom), 99, pp. 552-565. (sam) (hal)
  6. Benichoux, V., Rébillat, M., Brette, R. On the variation of interaural time differences with frequency (2016) Journal of the Acoustical Society of America, 139 (4), pp. 1810-1821. (sam) (hal)
  7. Bironeau, A., Dirrenberger, J., Sollogoub, C., Miquelard-Garnier, G., Roland, S.  Evaluation of morphological representative sample sizes for nanolayered polymer blends (2016) Journal of Microscopy, 264 (1), pp. 48-58. (sam) (hal)
  8. Blackmur, M.S., Preuss, M., Robson, J.D., Zanellato, O., Cernik, R.J., Ribeiro, F., Andrieux, J. Strain evolution during hydride precipitation in Zircaloy-4 observed with synchrotron X-ray diffraction (2016) Journal of Nuclear Materials, 474, pp. 45-61. (sam) (hal)
  9. Bollinger, C., Raterron, P., Castelnau, O., Detrez, F., Merkel, S. Textures in deforming forsterite aggregates up to 8 GPa and 1673 K (2016) Physics and Chemistry of Minerals, 43 (6), pp. 409-417. (sam) (hal)
  10. Cadenaa, J.H., Figueroaa, I.A., Suareza, M.A., Novelo-Peraltaa O., Gonzáleza, G., Lara-Rodrígueza, G.A., Alfonsoa, I. Production of al foams using the SDP method: Processing parameters and introduction of a new sintering device(2016). Journal of Mining and Metallurgy, Section B: Metallurgy, 52 (1), 47-52. (sam) (hal)
  11. Colin, X., Fayolle, B., Cinquin, J.  Further progress in the kinetic modelling of the thermal oxidation of epoxy-diamine matrices [Nouvelles avancées en modélisation cinétique de la thermo-oxydation des matrices époxy-diamine] (2016) Materiaux et Techniques, 104 (2), art. no. 202. (sam) (hal)
  12. Courapied, D., Kromer, R., Berthe, L., Peyre, P., Costil, S., Cormier, J., Boustie, M., Milhet, X. Laser adhesion test for thermal sprayed coatings on textured surface by laser (2016) Journal of Laser Applications, 28 (2), art. no. 022509. (sam) (hal)
  13. Courvoisier, E., Bicaba, Y., Colin, X. Proposal of a kinetic model for the thermal degradation of PEEK matrix [Proposition d'un modèle cinétique pour la dégradation thermique de la matrice PEEK] (2016) Materiaux et Techniques, 104 (2), art. no. 204. (sam) (hal)
  14. Cui, Z., Coletta, C., Rebois, R., Baiz, S., Gervais, M., Goubard, F., Aubert, P.-H., Dazzi, A., Remita, S. Radiation-induced reduction-polymerization route for the synthesis of PEDOT conducting polymers(2016) Radiation Physics and Chemistry, 119, pp. 157-166. (sam) (hal)
  15. Da Cruz, M., Van Schoors, L., Benzarti, K., Colin, X. Thermo-oxidative degradation of additive free polyethylene. Part I. Analysis of chemical modifications at molecular and macromolecular scales(2016) Journal of Applied Polymer Science, 133 (18), art. no. 43287. (sam) (hal)
  16. Dal, M., Fabbro, R.[INVITED] An overview of the state of art in laser welding simulation(2016) Optics and Laser Technology, 78, pp. 2-14. (sam) (hal)
  17. Ecault, R., Touchard, F., Boustie, M., Berthe, L., Dominguez, N.  Numerical modeling of laser-induced shock experiments for the development of the adhesion test for bonded composite materials (2016) Composite Structures, 152, pp. 382-394. (sam) (hal)
  18. Ernault, E., Richaud, E., Fayolle, B. Thermal oxidation of epoxies: Influence of diamine hardener (2016) Polymer Degradation and Stability, 134, pp. 76-86. (sam) (hal)
  19. Fabbro, R., Hirano, K., Pang, S. Analysis of the physical processes occurring during deep penetration laser welding under reduced pressure (2016) Journal of Laser Applications, 28 (2), art. no. 022427, (sam) (hal)
  20. Favier, V., Blanche, A., Wang, C., Phung, N.L., Ranc, N., Wagner, D., Bathias, C., Chrysochoos, A., Mughrabi, H. Very high cycle fatigue for single phase ductile materials: Comparison between α-iron, copper and α-brass polycrystals (2016) International Journal of Fatigue, 93, pp. 326-338. (sam) (hal)
  21. Fendzi, C., Mechbal, N., Rébillat, M., Guskov, M., Coffignal, G. A general Bayesian framework for ellipse-based and hyperbola-based damage localization in anisotropic composite plates (2016) Journal of Intelligent Material Systems and Structures, 27 (3), pp. 350-374. (sam) (hal)
  22. Fendzi, C., Rébillat, M., Mechbal, N., Guskov, M., Coffignal, G. A data-driven temperature compensation approach for Structural Health Monitoring using Lamb waves (2016) Structural Health Monitoring, 15 (5), pp. 525-540. (sam) (hal)
  23. Galeski, S., Piorkowska, E., Rozanski, A., Regnier, G., Galeski, A., Jurczuk, K. Crystallization kinetics of polymer fibrous nanocomposites (2016) European Polymer Journal, 83, pp. 181-201. (sam) (hal)
  24. Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., Morel, P. Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders (2016) Materials and Design, 100, pp. 102-109.(sam) (hal)
  25. Hamidi, A., Farzaneh, S., Nony, F., Ortega, Z., Khelladi, S., Monzon, M., Bakir, F., Tcharkhtchi, A. Modelling of sintering during rotational moulding of the thermoplastic polymers (2016) International Journal of Material Forming, 9 (4), pp. 519-530. (sam) (hal)
  26. Hamidi, A., Khelladi, S., Illoul, A., Shirinbayan, M., Bakir, F., Tcharkhtchi, A. Implementation of surface tension force in fluid flow during reactive rotational molding (2016) International Journal of Material Forming, 9 (2), pp. 131-148. (sam) (hal)
  27. Hammami, C., Balmes, E., Guskov, M.  Numerical design and test on an assembled structure of a bolted joint with viscoelastic damping (2016) Mechanical Systems and Signal Processing, 70-71, pp. 714-724. (sam) (hal)
  28. Harrou, F., Kadri, F., Khadraoui, S., Sun, Y.  Ozone measurements monitoring using data-based approach(2016) Process Safety and Environmental Protection, 100, pp. 220-231. (sam) (hal)
  29. Jodar, B., Seisson, G., Hébert, D., Bertron, I., Boustie, M., Berthe, L. Enhancement of a dynamic porous model considering compression-release hysteresis behavior: Application to graphite (2016) Journal of Physics D: Applied Physics, 49 (32), art. no. 325301. (sam) (hal)
  30. Kadri, F., Harrou, F., Chaabane, S., Sun, Y., Tahon, C. Seasonal ARMA-based SPC charts for anomaly detection: Application to emergency department systems (2016) Neurocomputing, 173, pp. 2102-2114. (sam) (hal)
  31. Kromer, R., Costil, S., Cormier, J., Berthe, L., Peyre, P., Courapied, D. Laser Patterning Pretreatment before Thermal Spraying: A Technique to Adapt and Control the Surface Topography to Thermomechanical Loading and Materials (2016) Journal of Thermal Spray Technology, 25 (3), pp. 401-410. (sam) (hal)
  32. Le Gac, P.Y., Celina, M., Roux, G., Verdu, J., Davies, P., Fayolle, B. Predictive ageing of elastomers: Oxidation driven modulus changes for polychloroprene (2016) Polymer Degradation and Stability, 130, pp. 348-355. (sam) (hal)
  33. Maimaitiyili, T., Steuwer, A., Blomqvist, J., Bjerkén, C., Blackmur, M.S., Zanellato, O., Andrieux, J., Ribeiro, F. Observation of the δ to ε Zr-hydride transition by in-situ synchrotron X-ray diffraction (2016) Crystal Research and Technology, 51 (11), pp. 663-670. (sam) (hal)
  34. Marciszko, M., Baczmański, A., Braham, C., Wróbel, M., Seiler, W., Wroński, S., Berent, K. Analysis of stresses and crystal structure in the surface layer of hexagonal polycrystalline materials: A new methodology based on grazing incidence diffraction (2016) Journal of Applied Crystallography, 49, pp. 85-102. (sam) (hal)
  35. Miquelard-Garnier, G., Roland, S. Beware of the Flory parameter to characterize polymer-polymer interactions: A critical reexamination of the experimental literature (2016) European Polymer Journal, 84, pp. 111-124. (sam) (hal)
  36. Neag, A., Favier, V., Bigot, R., & Atkinson, H. V. (2016). Comparison between numerical simulation of semisolid flow into a die using FORGE© and in situ visualization using a transparent sided die. Journal of Materials Processing Technology, 229, 338-348. (sam) (hal)
  37. Okamba-Diogo, O., Richaud, E., Verdu, J., Fernagut, F., Guilment, J., Fayolle, B. Investigation of polyamide 11 embrittlement during oxidative degradation (2016) Polymer (United Kingdom), 82, pp. 49-56. (sam) (hal)
  38. Okamba-Diogo, O., Richaud, E., Verdu, J., Fernagut, F., Guilment, J., Pery, F., Fayolle, B. Quantification of hindered phenols in polyamide 11 during thermal aging (2016) Polymer Testing, 52, pp. 63-70. (sam) (hal)
  39. Plancher, E., Petit, J., Maurice, C., Favier, V., Saintoyant, L., Loisnard, D., Rupin, N., Marijon, J.-B., Ulrich, O., Bornert, M., Micha, J.-S.,Robach, O., Castelnau, O. On the Accuracy of Elastic Strain Field Measurements by Laue Microdiffraction and High-Resolution EBSD: a Cross-Validation Experiment (2016) Experimental Mechanics, 56 (3), pp. 483-492. (sam) (hal)
  40. Pouzet, S., Peyre, P., Gorny, C., Castelnau, O., Baudin, T., Brisset, F., Colin, C., Gadaud, P. Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process (2016) Materials Science and Engineering A, 677, pp. 171-181. (sam) (hal)
  41. Ranc, N., Du, W., Ranc, I., Wagner, D. Experimental studies of Portevin-Le Chatelier plastic instabilities in carbon-manganese steels by infrared pyrometry (2016) Materials Science and Engineering A, 663, pp. 166-173. (sam) (hal)
  42. Ravereau, J., Fabre, A., Brehant, A., Bonnard, R., Sollogoub, C., Verdu, J. Ageing of polyvinylidene fluoride hollow fiber membranes in sodium hypochlorite solutions (2016) Journal of Membrane Science, 505, pp. 174-184. (sam) (hal)
  43. Rebillat, M., Guskov, M., Balmes, E., Mechbal, N. Simultaneous influence of static load and temperature on the electromechanical signature of piezoelectric elements bonded to composite aeronautic structures (2016) Journal of Vibration and Acoustics, Transactions of the ASME, 138 (6), art. no. 064504. (sam) (hal)
  44. Roland, S., Miquelard-Garnier, G., Gervais, M., Guinault, A., Sollogoub, C. Controlling the order of triblock copolymer via confinement induced by forced self-assembly (2016) Materials Today Communications, 6, pp. 37-43. (sam) (hal)
  45. Ruellan, A., Ducruet, V., Gratia, A., Saelices Jimenez, L., Guinault, A., Sollogoub, C., Chollet, G., Domenek, S. Palm oil deodorizer distillate as toughening agent in polylactide packaging films (2016) Polymer International, 65 (6), pp. 683-690. (sam) (hal)
  46. Seisson, G., Prudhomme, G., Frugier, P.-A., Hébert, D., Lescoute, E., Sollier, A., Videau, L., Mercier, P., Boustie, M., Berthe, L. Dynamic fragmentation of graphite under laser-driven shocks: Identification of four damage regimes (2016) International Journal of Impact Engineering, 91, pp. 68-79. (sam) (hal)
  47. Selmi, J., Lorong, P., Costes, J.P., Poulachon, G., Carras, P.  Prediction of stability in boring using a multistep tool (2016) International Journal of Advanced Manufacturing Technology, 85 (5-8), pp. 1077-1088. (sam) (hal)
  48. Sergeant, A., Mangeney, A., Stutzmann, E., Montagner, J. -., Walter, F., Moretti, L., & Castelnau, O. (2016). Complex force history of a calving-generated glacial earthquake derived from broadband seismic inversion. Geophysical Research Letters, 43(3), 1055-1065. (sam) (hal)
  49. Shirinbayan, M., Fitoussi, J., Bocquet, M., Meraghni, F., Surowiec, B., Tcharkhtchi, A. Multi-scale experimental investigation of the viscous nature of damage in Advanced Sheet Molding Compound (A-SMC) submitted to high strain rates (2016) Composites Part B: Engineering, . Article in Press. (sam) (hal)
  50. Talso, M., Emiliani, E., Haddad, M., Berthe, L., Baghdadi, M., Montanari, E., Traxer, O. Laser fiber and flexible ureterorenoscopy: The safety distance concept (2016) Journal of Endourology, 30 (12), pp. 1269-1274. (sam) (hal)
  51. Torabian, N., Favier, V., Ziaei-Rad, S., Dirrenberger, J., Adamski, F., Ranc, N. Thermal response of DP600 dual-phase steel under ultrasonic fatigue loading (2016) Materials Science and Engineering A, 677, pp. 97-105. (sam) (hal)
  52. Toulemonde, P.-A., Diani, J., Gilormini, P., Desgardin, N. On the account of a cohesive interface for modeling the behavior until break of highly filled elastomers (2016) Mechanics of Materials, 93, pp. 124-133. (sam) (hal)
  53. Toulemonde, P.-A., Diani, J., Gilormini, P., Lacroix, G., Desgardin, N. Roles of the Interphase Stiffness and Percolation on the Behavior of Solid Propellants (2016) Propellants, Explosives, Pyrotechnics, 41 (6), pp. 978-986. (sam) (hal)
  54. Villa, L., Cloutier, J., Compérat, E., Kronemberg, P., Charlotte, F., Berthe, L., Rouchausse, Y., Salonia, A., Montorsi, F., Traxer, O. Do We Really Need to Wear Proper Eye Protection When Using Holmium:YAG Laser during Endourologic Procedures? Results from an Ex Vivo Animal Model on Pig Eyes (2016) Journal of Endourology, 30 (3), pp. 332-337. (sam) (hal)
  55. Wawszczak, R., Baczmański, A., Marciszko, M., Wróbel, M., Czeppe, T., Sztwiertnia, K., Braham, C., Berent, K. Evolution of microstructure and residual stress during annealing of austenitic and ferritic steels (2016) Materials Characterization, 112, pp. 238-251. (sam) (hal)
  56. Zhu, Y., Bironeau, A., Restagno, F., Sollogoub, C., Miquelard-Garnier, G. Kinetics of thin polymer film rupture: Model experiments for a better understanding of layer breakups in the multilayer coextrusion process (2016) Polymer (United Kingdom), 90, pp. 156-164. (sam) (hal)