1. Ahmadifar, M., Benfriha, K., Shirinbayan, M. Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Rend Laser Technology, 163, art. no. 109366
  2. Ahmadifar M., Benfriha K., Shirinbayan M. Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF) (2023) Polymers, 15 (3), art. no. 507
  3. Ahmadifar M., Shirinbayan M., Benfriha K. Investigation of the impact of the short fiber reinforcements on the thermal and mechanical properties of polymer-based composites manufactured by material extrusion (2023) International Journal of Advanced Manufacturing Technology, 127 (7-8), pp. 3801 - 3817, 
  4. Arquier, R., Miquelard-Garnier, G., Iliopoulos, I., Régnier, G.; Assessing the shear viscous behavior of continuous carbon fiber reinforced PEKK composites with squeeze flow measurements (2023) Polymer Testing, 123, art. no. 108060, .
  5. Ayad, M., Ünaldi, S., Scius-Bertrand, M., Le Bras, C., Fayolle, B., Berthe, L. Dynamical modeling of bi-layer Aluminium adhesive tape for laser shock applications (2023) Optics aabilities using a coupled photonic Doppler velocimetry (PDV) and triature velocity interferometer system for any reflector (VISAR) diagnostic (2023) Review of Scientific Instruments, 94 (3), art. no. 033905
  6. Ayad M., Ünaldi S., Scius-Bertrand M., Le Bras C., Fayolle B., Berthe L.Dynamical modeling of bi-layer Aluminium adhesive tape for laser shock applications (2023) Optics and Laser Technology, 163, art. no. 109366
  7. Ben Hassen M., Tamboura S., Fitoussi J., Mrad H. Non-destructive Identification of Damage Mechanisms in Unidirectional Composites by Acoustic Emission and Machine Learning-Based Clustering (2023) Applied Condition Monitoring, 22, pp. 60 - 69, Cited 0 times
  8. Boutoux, G., Chevalier, J.-M., Arrigoni, M., Berthe, L., Beuton, R., Bicrel, B., Galtié, A., Hébert, D., Le Clanche, J., Loillier, S., Loison, D., Maury, P., Raffray, Y., Videau, L. Experimental evidence of shock wave measurements with low-velocity (<100 m s-1) and fast dynamics (<10 ns) capinforced PA6 Materials in Fused Filament Fabrication (FFF) (2023) Polymers, 15 (3), art. no. 507
  9. Boutoux G., Chevalier J.-M., Arrigoni M., Berthe L., Beuton R., Bicrel B., Galtié A., Hébert D., Le Clanche J., Loillier S., Loison D., Maury P., Raffray Y., Videau L. Experimental evidence of shock wave measurements with low-velocity (<100 m s-1) and fast dynamics (<10 ns) capabilities using a coupled photonic Doppler velocimetry (PDV) and triature velocity interferometer system for any reflector (VISAR) diagnostic (2023) Review of Scientific Instruments, 94 (3), art. no. 033905, Cited 0 times.
  10. Bouvier, D., Rébillat, M., Monteiro, E., Mechbal, N. ;A spatio-temporal nonlinear semi-analytical framework describing longitudinal waves propagation in dahttps://hal.science/hal-04097265v1maged structures based on Green–Volterra formalism (2023) Mechanical Systems and Signal Processing, 189, art. no. 110048, .
  11. Brot, G., Koutiri, I., Bonnand, V., Favier, V., Dupuy, C., Ranc, N., Aimedieu, P., Lefebvre, F., Hauteville, R. Microstructure and defect sensitivities in the very high-cycle fatigue response of Laser Powder Bed Fused Ti–6Al–4V (2023) International Journal of Fatigue, 174, art. no. 107710, . 
  12. Chebil, M.S., Gerard, P., Issard, H., Richaud, E. Thermal stability of polymethacrylic based ELIUM® resin: Effect of comonomers, antioxidants and aluminum trihydrate filler (2023) Polymer Degradation and Stability, 213, art. no. 110367
  13. Chebil G., Bettebghor D., Renollet Y., Lapouge P., Davoine C., Thomas M., Favier V., Schneider M. Deep learning object detection for optical monitoring of spatters in L-PBF (2023) Journal of Materials Processing Technology, 319, art. no. 118063,
  14. Chinesta F., Cordero A., Garrido N., Torregrosa J.R., Triguero-Navarro P.  Simultaneous roots for vectorial problems (2023) Computational and Applied Mathematics, 42 (5), art. no. 227
  15. Chinesta F., Cueto E. Conciliating accuracy and efficiency to empower engineering based on performance: a short journey (2023) Comptes Rendus - Mecanique, 351
  16. Clement, A., Auger, T.An EAM potential for α-brass copper-zinc alloys: application to plasticity and fracture (2023) Modelling and Simulation in Materials Science and Engineering, 31 ), art. no. 015004
  17. Chevalier, X., Pound-Lana, G., Gomes Correia, C., Cavalaglio, S., Cabannes-Boué, B., Restagno, F., Miquelard-Garnier, G., Roland, S., Navarro, C., Fleury, G., Zelsmann, M. Self-organization and dewetting kinetics in sub-10 nm diblock copolymer line/space lithography (2023) Nanotechnology, 34 (17), art. no. 175602
  18. Cordier, P., Gouriet, K., Weidner, T., Van Orman, J., Castelnau, O., Jackson, J.M., Carrez, P. Periclase deforms more slowly than bridgmanite under mantle conditions (2023) Nature, 613 (7943), pp. 303-307. 
  19. Crespi, A.E., Nordet, G., Peyre, P., Ballage, C., Hugon, M.-C., Chapon, P., Minea, T.The Use of Sacrificial Graphite-like Coating to Improve Fusion Efficiency of Copper in Selective Laser Melting (2023) Materials, 16 (6), art. no. 2460, . 
  20. Delacroix T., Lomello F., Schuster F., Maskrot H., Jacquier V., Lapouge P., Coste F., Garandet J.-P. Measurement of powder bed oxygen content by image analysis in laser powder bed fusion (2023) Materials and Design, 226, art. no. 111667
  21. Delannoy R., Quélennec B., Tognetti V., Delbreilh L., Delpouve N., Richaud E. Glass and sub-glass relaxation changes induced by thermal ageing of epoxy-amine polymer networks – A DMA study (2023) Polymer Degradation and Stability, 216, art. no. 110487
  22. Delozanne, J., Montana, J.S., Guinault, A., Desgardin, N., Cuvillier, N., Richaud, E. Thermal ageing of bonded assemblies. Effect of adhesive curing degree (2023) Journal of Adhesion, 99 (6), pp. 911-929. 
  23. Delozanne, J., Montana, J.S., Guinault, A., Desgardin, N., Cuvillier, N., Richaud, E. Thermal ageing of bonded assemblies. Effect of adhesive curing degree (2023) Journal of Adhesion, 99 (6), pp. 911-929. 
  24. Fournet-Fayard, L., Cayron, C., Koutiri, I., Lapouge, P., Guy, J., Dupuy, C., Obaton, A.-F. Thermal analysis of parts produced by L-PBF and correlation with dimensional accuracy (2023) Welding in the World, 67 (4), pp. 845-858. 
  25. Fournet-Fayard L., Fox J.C., Cayron C., Koutiri I., Obaton A.-F. Bearing area curve based partitioning for the verification of theoretical supplemental geometry on additively manufactured lattice structures (2023) Additive Manufacturing, 68, art. no. 103521
  26. Frija M., Ayeb M., Seddik R., Fathallah R. Reliability prediction of high-cycle fatigue behavior of parts treated by laser shock peening (2023) Fatigue and Fracture of Engineering Materials and Structures, 46 (9), pp. 3514 – 3529
  27. Garois, S., Daoud, M., Traidi, K., Chinesta, F. Artificial intelligence modeling of induction contour hardening of 300M steel bar and C45 steel spur-gear (2023) International Journal of Material Forming, 16 (3), art. no. 26, .
  28. Gomez-Omella M., Flores J., Sierra B., Ferreiro S., Hascoët N., Chinesta F. Optimizing porosity detection in wire laser metal deposition processes through data-driven AI classification techniques (2023) Engineering Failure Analysis, 152, art. no. 107464,
  29. Ghnatios C., Kestelyn X., Denis G., Champaney V., Chinesta F. Learning Data-Driven Stable Corrections of Dynamical Systems—Application to the Simulation of the Top-Oil Temperature Evolution of a Power Transformer (2023) Energies, 16 (15), art. no. 5790, 
  30. Guliyeva, A., Pung, H., Tencé-Girault, S., Rébillat, M., Serghei, A., Gervais, M., Sollogoub, C., Roland, S. Improvement of the self-assembly of low χ ABA triblock copolymers with the addition of an ionic liquid (2023) Polymer International, 72 (3), pp. 356-365. 
  31. Guo, S., Rébillat, M., Mechbal, N. Prediction of frequency and spatially dependent attenuation of guided waves propagating in mounted and unmounted A380 parts made up of anisotropic viscoelastic composite laminates (2023) Structural Health Monitoring, 22 (2), pp. 1326-1352. 
  32. Guo S., Rébillat M., Liu Y., Li Q., Lu C., Mechbal N. Guided waves propagation in arbitrarily stacked composite laminates: Between-layers incompatibility issue resolution using hybrid matrix strategy (2023) Composite Structures, 322, art. no. 117360
  33. Haddadi H., Tran H.-S., Franciosi P. Use of Digital Image Correlation (DIC) to Improve the Critical Strain-Annealing (CSA) Method for Producing Large Crystals: Application to A1050 Commercially Pure Aluminum (2023) Crystals, 13 (6), art. no. 923, 
  34. Hebrard L., Buffiere J.-Y., Palin-Luc T., Ranc N., Majkut M., King A., Weck A. Environment effect on internal fatigue crack propagation studied with in-situ X-ray microtomography (2023) Materials Science and Engineering: A, 882, art. no. 145462, Cited 0 times
  35. Hernández, Q., Badías, A., Chinesta, F., Cueto, E. Thermodynamics-informed neural networks for physically realistic mixed reality (2023) Computer Methods in Applied Mechanics and Engineering, 407, art. no. 115912,
  36. Hernández Q., Badías A., Chinesta F., Cueto E. Port-metriplectic neural networks: thermodynamics-informed machine learning of complex physical systems (2023) Computational Mechanics, 72 (3), pp. 553 - 561
  37. Jacot, M., Champaney, V., Chinesta, F., Cortial, J. Parametric Damage Mechanics Empowering Structural Health Monitoring of 3D Woven Composites (2023) Sensors, 23 (4), art. no. 1946,
  38. Jiang, J., Wu, J., Chen, Q., Chatzigeorgiou, G., Meraghni, F.Physically informed deep homogenization neural network for unidirectional multiphase/multi-inclusion thermoconductive composites (2023) Computer Methods in Applied Mechanics and Engineering, 409, art. no. 115972
  39. Kazemzadeh-Parsi, M.-J., Ammar, A., Chinesta, F. Parametric Analysis of Thick FGM Plates Based on 3D Thermo-Elasticity Theory: A Proper Generalized Decomposition Approach (2023) Materials, 16 (4), art. no. 1753,
  40. Kormpos, P., Unaldi, S., Berthe, L., Tserpes, K. A Laser Shock-Based Disassembly Process for Adhesively Bonded Ti/CFRP Parts (2023) Processes, 11 (2), art. no. 506,
  41. Kromer, R., Gorny, C., Gruhier, E., Le Guen, E., Arvieu, C., Lacoste, E.Absorptivity measurement of solid and powder bed under IR laser beam (2023) Optics and Laser Technology, 157, art. no. 108508, 
  42. Kutchukian S., Doizi S., Lapouge P., Germain T., Dragos L., Berthe L., Solano C., Candela L., Corrales M., Chicaud M., Traxer O., Panthier F. Ablation rates with Holmium:YAG and Thulium Fiber Laser: Influence of the stone phantom homogeneity. An in vitro study [Efficacité des lasers Holmium:YAG et thulium fibré: influence de l'homogénéité du modèle in vitro] (2023) Progres en Urologie, 33 (8-9), pp. 456 - 462
  43. Lapostolle, L., Morin, L., Derrien, K., Berthe, L., Castelnau, O. Modeling and simulation of laser shock waves in elasto-plastic polycrystalline microstructures (2023) Journal of the Mechanics and Physics of Solids, 176, art. no. 105310
  44. Lapostolle, L., Morin, L., Derrien, K., Berthe, L., Castelnau, O. Fast numerical estimation of residual stresses induced by laser shock peening (2023) European Journal of Mechanics, A/Solids, 97, art. no. 104844
  45. Le Duigou, A., Grabow, M., Castro, M., Toumi, R., Ueda, M., Matsuzaki, R., Hirano, Y., Dirrenberger, J., Scarpa, F., D'Elia, R., Labstie, K., Lafont, U. Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer(2023) Heliyon, 9 (3), art. no. e13581
  46. Lesimple, Gwladys and Iliopoulos, Ilias and Marijon, Jean-Baptiste and Fayolle, Bruno, Full Characterization of Water Transport Properties in Polyetherketoneketone (PEKK) (2023) ACS Applied Polymer Materials 5,1, 302-310
  47. Li, R., Hirano, Y., Dirrenberger, J., Scarpa, F., D'Elia, R., Labstie, K., Lafont, U. Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer(2023) Heliyon, 9 (3), art. no. e13581,
  48. Lottier, S., Tencé-Girault, S., Gervat, L., Saintier, N., Miquelard-Garnier, G., Fayolle, B. Effect of chemical ageing on fatigue life of short glass fiber-reinforced Polyamide 6,6 (2023) Polymer Degradation and Stability, 208, art. no. 110244
  49. Louhichi M.A., Poulachon G., Lorong P., Outeiro J., Monteiro E., Cotton D. Modeling and validation of residual stresses induced by heat treatment of AA 7075-T6 samples toward the prediction of part distortion (2023) Machining Science and Technology, 27 (3), pp. 247 - 267
  50. Makki M., Ayoub G., Lee C.W., Bae C., Colin X. Effect of battery fast cyclic charging on the mechanical and fracture behavior of the lithium-ion battery separator (2023) Polymer Degradation and Stability, 216, art. no. 110469,
  51. Marciszko-Wiąckowska M., Baczmański A., Braham C., Wątroba M., Wroński S., Wawszczak R., Gonzalez G., Kot P., Klaus M., Genzel C. Stress evolution in plastically deformed austenitic and ferritic steels determined using angle- and energy-dispersive diffraction (2023) Materials Characterization, 203, art. no. 113114
  52. Marquez Costa J.P., Jumel J. Theoretical analysis of self-similar crack propagation along viscoelastic and elasto–viscoplastic interface in a double cantilever beam test (2023) International Journal of Fracture, 241 (2), pp. 233 - 249
  53. Mayi, Y.A., Dal, M., Peyre, P., Bellet, M., Fabbro, R. ; Physical mechanisms of conduction-to-keyhole transition in laser welding and additive manufacturing processes (2023) Optics and Laser Technology, 158, art. no. 108811, . 
  54. Moya, B., Badias, A., Gonzalez, D., Chinesta, F., Cueto, E. Physics Perception in Sloshing Scenes With Guaranteed Thermodynamic Consistency (2023) IEEE Transactions on Pattern Analysis and Machine Intelligence, 45 (2), pp. 2136-2150. 
  55. Moya B., Badías A., González D., Chinesta F., Cueto E. A thermodynamics-informed active learning approach to perception and reasoning about fluids (2023) Computational Mechanics, 72 (3), pp. 577 – 591
  56. oz, D., Allix, O., Chinesta, F., Ródenas, J.J., Nadal, E. ; Manifold learning for coherent design interpolation based on geometrical and topological descriptors (2023) Computer Methods in Applied Mechanics and Engineering, 405, art. no. 115859, 
  57. Postorino, Hadrien and Monteiro, Eric and Rebillat, Marc and Mechbal, Nazih Cross-structures Deep Transfer Learning through Kantorovich potentials for Lamb Waves based Structural Health Monitoring Journal of Structural Dynamics ,24-50
  58. Praniewicz, M., Fournet-Fayard, L., Fox, J.C., Cayron, C., Koutiri, I., Obaton, A.-F. Bearing area curve based partitioning for the verification of theoretical supplemental geometry on additively manufactured lattice structures(2023) Additive Manufacturing, 68, art. no. 103521, .
  59. Raffray Y., Jodar B., Sangleboeuf J.-C., Benuzzi-Mounaix A., Vinci T., Berthe L., Lescoute E., Barraud E., Brambrink E., Daudin R., Blandin J.-J., Loison D. Zr-based metallic glasses Hugoniot under laser shock compression and spall strength evolution with the strain rate (> 107 s-1) (2023) International Journal of Impact Engineering, 181, art. no. 104755
  60.  Rodriguez S., Monteiro E., Mechbal N., Rebillat M., Chinesta F. Hybrid twin of RTM process at the scarce data limit(2023) International Journal of Material Forming, 16 (4), art. no. 40, Cited 0 times.
  61. Runacher, A., Kazemzadeh-Parsi, M.-J., Di Lorenzo, D., Champaney, V., Hascoet, N., Ammar, A., Chinesta, F. Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion (2023) Polymers, 15 (6), art. no. 1449, . 
  62. Sancarlos, A., Champaney, V., Cueto, E., Chinesta, F. Regularized regressions for parametric models based on separated representations (2023) Advanced Modeling and Simulation in Engineering Sciences, 10 (1), art. no. 4, . 
  63. Stolidi A., Touron A., Toulemonde L., Paradis H., Lapouge P., Coste F., Garandet J.-P.  Towards in-situ fumes composition monitoring during an additive manufacturing process using energy dispersive X-ray fluorescence spectrometry (2023) Additive Manufacturing Letters, 6, art. no. 100153, 
  64. Tajdary P., Dorhmi K., Morin L., Derrien K., Hadjem-Hamouche Z., Braham C., Chevalier J.-P. Characterization and modeling of the damage mechanisms in ductile steel metal-matrix composites: Application to virtual forming (2023) Mechanics of Materials, 184, art. no. 104741, 
  65. Tlili, A., Ghanem, F., Sidhom, H., Braham, C. ; Behavior and damage of the near-surface layer of parts pre-machined by the EDM process: Experimental characterization and numerical simulation (2023) International Journal of Advanced Manufacturing Technology, 126 (3-4), pp. 991-1003.
  66. Trdan U., Klobčar D., Berthe L., Šturm R., Bergant Z. High-cycle fatigue enhancement of dissimilar 2017A-T451/7075-T651 Al alloy joint fabricated by a single pass FSW without any post-processing (2023) Journal of Materials Research and Technology, 25, pp. 2333 - 2352, Cited 0 times.
  67. Vanaei, H.R., Khelladi, S., Tcharkhtchi, A. ;Nanotechnology for Pain-Free Dentistry (2023) Materials Horizons: From Nature to Nanomaterials, pp. 111-120.
  68. Veitia M.S.-I., Pommet M., Garnier G.M., Lagarde N., Khoulani S., Hauquier F., Havet J.L., Gomez C., Guiga W., Gervais M., Garcia R., Dewez S., Cousquer C. CAP’VR, a collaborative project to develop immersive practical work [CAP’VR, un projet collaboratif pour développer des travaux pratiques immersifs] (2023) Actualite Chimique, (486), pp. 37 - 45
  69. Vellayappan M.V., Duarte F., Sollogoub C., Dirrenberger J., Guinault A., Frith J.E., Parkington H.C., Molotnikov A., Cameron N.R. Fabrication of Architectured Biomaterials by Multilayer Co-Extrusion and Additive Manufacturing (2023) Advanced Functional Materials, 33 (31), art. no. 2301547
  70. Vibert, C., Fayolle, B., Ricard, D., Dupont, A.-L.; Decoupling hydrolysis and oxidation of cellulose in permanent paper aged under atmospheric conditions (2023) Carbohydrate Polymers, 310, art. no. 120727, . 
  71. Wang Z., Bouaziz O., Dirrenberger J., Lapouge P. Corrugation Reinforced Architectured Materials by Direct Laser Hardening: A Study of Geometrically Induced Work Hardening in Steel (2023) Steel Research International, 94 (6), art. no. 2200695
  72. Zanchi, S., Engel, M., Pascaud, A., Bargain, F., Lebreton, S., Domingues dos Santos, F., Roland, S., Tencé-Girault, S. Unraveling the morphological diversity of P(VDF-ter-TrFE-ter-CTFE) semi-crystalline terpolymers via combined AFM and SAXS experiments (2023) Polymer Testing, 120, art. no. 107973, . 
  73. Zanchi S., Pascaud A., Domingues Dos Santos F., Tencé-Girault S., Roland S. Nanometric and Macroscopic Electroactive Response of P(VDF-co-TrFE) Copolymers and P(VDF-ter-TrFE-ter-CTFE) Terpolymers (2023) ACS Applied Polymer Materials, 5 (7), pp. 4966 - 4976
  74.  Zirak, N., Tcharkhtchi, A. Fatigue life prediction for amorphous glassy polymers based on cumulative evolution of micro-defects (2023) International Journal of Fatigue, 167, art. no. 107360