1. Abdessalem, A., Tamboura, S., Fitoussi, J., Ben Daly, H., Tcharkhtchi, A. (2019). Bi-phasic water diffusion in sheet molding compound composite. Journal of Applied Polymer Science, art. no. 48381. (sam) (hal)

  2. Ageorges, V., Peixinho, J., Perret, G. Flow and air-entrainment around partially submerged vertical cylinders (2019) Physical Review Fluids, 4 (6), article number 064801.  (sam) (hal)

  3. Aguado, J. V., Borzacchiello, D., Kollepara, K. S., Chinesta, F., & Huerta, A. (2019). Tensor representation of non-linear models using cross approximations. Journal of Scientific Computing, 81(1), 22-47.  (sam)  (hal )

  4. Aid, S., Eddhahak, A., Khelladi, S., Ortega, Z., Chaabani, S., & Tcharkhtchi, A. (2019). On the miscibility of PVDF/PMMA polymer blends: Thermodynamics, experimental and numerical investigations. Polymer Testing, 73, 222-231.  (sam)  (hal)

  5. Albertini, F; Dirrenberger, J; Molotnikov, A; Sollogoub, C (2019) Computational Investigation of the Effective Mechanical Behavior for 3D Pre-Buckled Auxetic Lattices. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME. 86 (11). Article number  111003 (sam) (hal)

  6. Ammar, A., & Chinesta, F. (2019). Direct numerical simulation of flexible molecules and data-driven molecular conformation. Comptes Rendus - Mecanique, 347(11), 743-753.  (sam) (hal)

  7. Andreau, O., Koutiri, I., Peyre, P., Penot, J. -., Saintier, N., Pessard, E., . . . Baudin, T. (2019). Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting. Journal of Materials Processing Technology, 264, 21-31.  (sam)  (hal)

  8. Argerich Martín, C., Ibáñez Pinillo, R., Barasinski, A., & Chinesta, F. (2019). Code2vect: An efficient heterogenous data classifier and nonlinear regression technique. Comptes Rendus - Mecanique, 347(11), 754-761.  (sam) (hal)

  9. Araujo, S., Delpouve, N., Domenek, S., Guinault, A., Golovchak, R., Szatanik, R., . . . Dargent, E. (2019). Cooperativity scaling and free volume in plasticized polylactide. Macromolecules, 52(16), 6107-6115. (sam) (hal)

  10. Aubert, B., Hebert, D., Rullier, J. -., Lescoute, E., Videau, L., & Berthe, L. (2019). Simulation of laser-driven cratering experiments on aluminum. Journal of Laser Applications, 31(4),  Article number 042014 (sam) (hal)

  11. Badías, A., Curtit, S., González, D., Alfaro, I., Chinesta, F., & Cueto, E. (2019). An augmented reality platform for interactive aerodynamic design and analysis. International Journal for Numerical Methods in Engineering, 120(1), 125-138.  (sam)  (hal)

  12. Baradi, M. B., Cruz, C., Riedel, T., & Régnier, G. (2019). Mechanical and microstructural characterization of flowing weld lines in injection-molded short fiber-reinforced PBT. Polymer Testing, 74, 152-162.  (sam)  (hal)

  13. Baradi, M. B., Cruz, C., Riedel, T., & Régnier, G. (2019). Frontal weld lines in injection-molded short fiber-reinforced PBT: Extensive microstructure characterization for mechanical performance evaluation. Polymer Composites, 40 (1), 4547-4558. (sam) (hal)

  14. Bargain, François., Thuau, Damien., Panine, Pierre., Hadziioannou, Georges ., Domingues Dos Santos, Fabrice., Tencé-Girault, Sylvie.  (2019). Thermal behavior of poly(VDF-ter-TrFE-ter-CTFE) copolymers: Influence of CTFE termonomer on the crystal-crystal transitions Polymer, 161, 64.77.  (sam) (hal)

  15. Ben Abdallah, A., Kallel, A., Gamaoun, F., Tcharkhtchi, A. Enzymatic Hydrolysis of Poly (Caprolactone) and its Blend with Styrene–Butadiene–Styrene (40% PCL/60% SBS) (2019) Journal of Polymers and the Environment, 27 (11), 2341–2351. (sam) (hal)

  16. Ben Rhouma, A; Sidhom, N; Makhlouf, K; Sidhom, H; Braham, C; Gonzalez, G (2019) Effect of machining processes on the residual stress distribution heterogeneities and their consequences on the stress corrosion cracking resistance of AISI 316L SS in chloride medium. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 105 (1-4). 1699-1711. (sam) (hal)

  17. Beuguel, Q., Guinault, A., Léger, L., Restagno, F., Sollogoub, C., & Miquelard-Garnier, G. (2019). Nanorheology with a conventional rheometer: Probing the interfacial properties in compatibilized multinanolayer polymer films. ACS Macro Letters,  1309-1315 (sam) (hal)

  18. Borzacchiello, D., Aguado, J. V., & Chinesta, F. (2019). Non-intrusive sparse subspace learning for parametrized problems. Archives of Computational Methods in Engineering, 26(2), 303-326.  (sam) (hal)

  19. Cherif, Rabeb ., Eddhahak, Anissa., Gabet, Thomas., Hammoum, Farhat., & Neji Jamel . (2019) Effect of the processing conditions on the viscoelastic properties of a high-RAP recycled asphalt mixture: micromechanical and experimental approaches, International Journal of Pavement Engineering, 1-10. (sam) (hal)

  20. Choupin, T., Debertrand, L., Fayolle, B., Régnier, G., Paris, C., Cinquin, J., & Brulé, B. (2019). Influence of thermal history on the mechanical properties of poly(ether ketone ketone) copolymers. Polymer Crystallization, 2(6) Article number e10086 (sam) (hal)

  21. Colin, X., Hassine, M.B., Nait-Abelaziz, M.  (2019) Chemo-mechanical model for predicting the lifetime of EPDM rubbers .  Rubber Chemistry and Technology, 92 (4), pp. 722-748. (sam) (hal)

  22. Coste, F., Ridlova, M., Gallienne, N., Quintard, J., & Bert, G. (2019). Surface oxidation of nickel base alloys and stainless steel under pure oxygen atmosphere: Application to oxygen safety. Journal of Laser Applications, 31(2), Article number 022518  (sam)  (hal)
  23. Curti, R., Girardon, S., Pot, G., & Lorong, P. (2019). How to model orthotropic materials by the discrete element method (DEM): Random sphere packing or regular cubic arrangement? Computational Particle Mechanics, 6(2), 145-155.  (sam) (hal)
  24. Dal, M., Coste, F., Schneider, M., Bolis, R., & Fabbro, R. (2019). Laser based method for surface tension and density measurements for liquid refractory metals (nb, ta, and W). Journal of Laser Applications, 31(2),  Article number 022604 (sam)  (hal)
  25. De Angelo, M., Spagnuolo, M., D’Annibale, F., Pfaff, A., Hoschke, K., Misra, A., ., Peyre, P., Dirrenberger, J.,.Pawlikowski, M. (2019). The macroscopic behavior of pantographic sheets depends mainly on their microstructure: Experimental evidence and qualitative analysis of damage in metallic specimens. Continuum Mechanics and  thermodynamics, Article number 107669 (sam) (hal)

  26. Delozanne, J., Desgardin, N., Cuvillier, N., & Richaud, E. (2019). Thermal oxidation of aromatic epoxy-diamine networks. Polymer Degradation and Stability, 166, 174-187. (sam) (hal)

  27. Dell'Isola, F., Giorgio, I., Placidi, L., Spagnuolo, M., Peyre, P., Dupuy, C., . . . Igumnov, L. (2019). Pantographic metamaterials: A view towards applications. Materials Physics and Mechanics, 42(5), 637-645.  (sam)  (hal)

  28. Dell’Isola, F., Seppecher, P., Spagnuolo, M., Barchiesi, E., Hild, F., Lekszycki, T., . . . Hayat, T. (2019). Advances in pantographic structures: Design, manufacturing, models, experiments and image analyses. Continuum Mechanics and Thermodynamics, 31(4), 1231-1282. (sam) (hal)

  29. De Francqueville, F., Gilormini, P., & Diani, J. (2019). Representative volume elements for the simulation of isotropic composites highly filled with monosized spheres. International Journal of Solids and Structures, 158, 277-286.  (sam)  (hal)
  30. Dereure, C., Hall, R., Baber, F., Loison, D., Lescoute, E., Guin, J. -., Berthe, L., Nivard, M., Guven, I. (2019). Laser induced dynamic fracture of fused silica: Experiments and simulations. Journal of Non-Crystalline Solids, 511, 125-139. (sam) (hal)
  31. De Terris, T., Andreau, O., Peyre, P., Adamski, F., Koutiri, I., Gorny, C., & Dupuy, C. (2019). Optimization and comparison of porosity rate measurement methods of selective laser melted metallic parts. Additive Manufacturing, 28, 802-813. (sam) (hal)
  32. De Coninck, V., Keller, E. X., Chiron, P., Dragos, L., Emiliani, E., Doizi, S., Berthe, L., Traxer, O. (2019). Ho:YAG laser lithotripsy in non-contact mode: Optimization of fiber to stone working distance to improve ablation efficiency. World Journal of Urology, 37(9), 1933-1939. (sam) (hal)

  33. Duballet, R., Baverel, O., & Dirrenberger, J. (2019). Space truss masonry walls with robotic mortar extrusion. Structures, 18, 41-47. (sam) (hal)

  34. Ernault, E., Dirrenberger, J., Richaud, E., & Fayolle, B. (2019). Prediction of stress induced by heterogeneous oxidation: Case of epoxy/amine networks. Polymer Degradation and Stability, 162, 112-121. (sam) (hal)

  35. Fabbro, R. (2019). Scaling laws for the laser welding process in keyhole mode. Journal of Materials Processing Technology, 264, 346-351. (sam) (hal)

  36. François, M., Segonds, F., Rivette, M., Turpault, S., & Peyre, P. (2019). Design for additive manufacturing (DfAM) methodologies: A proposal to foster the design of microwave waveguide components. Virtual and Physical Prototyping, 14(2), 175-187.  (sam) (hal)

  37. Gilormini, P., Chinesta, F. (2019). Viscous drag and rod orientation kinematics in an orthotropic fluid. Journal of Non-Newtonian Fluid Mechanics, 270, pp. 96-103.  (sam) (hal)
  38. Ghnatios, C., Abisset, E., Ammar, A., Cueto, E., Duval, J. -., & Chinesta, F. (2019). Advanced separated spatial representations for hardly separable domains. Computer Methods in Applied Mechanics and Engineering, 354, 802-819. (sam) (hal)
  39. Ghnatios, C., Alfaro, I., González, D , Chinesta, F., & Cueto, E. (2019). Data-driven GENERIC modeling of poroviscoelastic materials. Entropy. 21, article number 1165. (sam) (hal)
  40. Ghrib, M., Rébillat, M., Vermot des Roches, G., & Mechbal, N. (2019). Automatic damage type classification and severity quantification using signal based and nonlinear model based damage sensitive features. Journal of Process Control, 83, 136-146. (sam) (hal)
  41. González, D., Chinesta, F., & Cueto, E. (2019). Thermodynamically consistent data-driven computational mechanics. Continuum Mechanics and Thermodynamics, 31(1), 239-253.  (sam) (hal)
  42. González, D., Chinesta, F., & Cueto, E. (2019). Learning corrections for hyperelastic models from data. Frontiers in Materials, 6, 15 Article number 14 (sam) (hal)
  43. Gouskov, A.M., Guskov, M.A., Panovko, G.Y., Shokhin, A.E., Kalimoldayev, M.N., Ualiyev, Z.G. (2019). Particularities of multi-cutter cutting dynamics. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 3 (435), pp. 231-239.  (sam) (hal)

  44. Gouskov, A. M., Guskov, M. A., Tung, D. D., & Panovko, G. Y. (2019). Nonlinear regenerative dynamics analysis of the multicutter turning process. Russian Journal of Nonlinear Dynamics, 15(2), 145-158.  (sam) (hal)

  45. Gu, T., Medy, J. -., Klosek, V., Castelnau, O., Forest, S., Hervé-Luanco, E., . . . Villechaise, P. (2019). Multiscale modeling of the elasto-plastic behavior of architectured and nanostructured cu-nb composite wires and comparison with neutron diffraction experiments. International Journal of Plasticity, 122, 1-30.  (sam) (hal)

  46. Guenoun, G., Faou, J. -., Régnier, G., Schmitt, N., & Roux, S. (2019). Thermal cycling of cold-pressed PTFE compacts: Reversible and irreversible behavior. Polymer Testing, 75, 99-106. (sam) (hal)

  47. Hériveaux, Y., Nguyen, V. -., Brailovski, V., Gorny, C., & Haïat, G. (2019). Reflection of an ultrasonic wave on the bone-implant interface: Effect of the roughness parameters. Journal of the Acoustical Society of America, 145(6), 3370-3381. (sam) (hal)
  48. Huang, J., David, A., Le Gac, P. -., Lorthioir, C., Coelho, C., & Richaud, E. (2019). Thermal oxidation of poly(dicyclopentadiene)– kinetic modeling of double bond consumption. Polymer Degradation and Stability, 166, 258-271. (sam) (hal)
  49. Ibáñez, R., Scheuer, A., Abisset-Chavanne, E., Chinesta, F., Huerta, A., & Keunings, R. (2019). A simple microstructural viscoelastic model for flowing foams. International Journal of Material Forming, 12(2), 295-306.  (sam) (hal)
  50. Ibañez, R., Abisset-Chavanne, E., Cueto, E., Ammar, A., Duval, J. -., & Chinesta, F. (2019). Some applications of compressed sensing in computational mechanics: Model order reduction, manifold learning, data-driven applications and nonlinear dimensionality reduction. Computational Mechanics, 64(5), 1259-1271. (sam) (hal)
  51. Ibáñez, R., Abisset-Chavanne, E., González, D., Duval, J.-L., Cueto, E., Chinesta, F. (2019). Hybrid constitutive modeling: data-driven learning of corrections to plasticity models (2019) International Journal of Material Forming, 12 (4), pp. 717-725.  (sam) (hal)
  52. Ibáñez, R., Abisset-Chavanne, E., Chinesta, F., Huerta, A., & Cueto, E. (2019). A local multiple proper generalized decomposition based on the partition of unity. International Journal for Numerical Methods in Engineering, 120(2), 139-152.   (sam) (hal)
  53. Ibáñez, R., Ammar, A., Cueto, E., Huerta, A., Duval, J. -., & Chinesta, F. (2019). Multiscale proper generalized decomposition based on the partition of unity. International Journal for Numerical Methods in Engineering, 120(6), 727-747. (sam) (hal)
  54. Kallitsis, K., Soulestin, T., Tencé-Girault, S., Brochon, C., Cloutet, E., Domingues Dos Santos, F., & Hadziioannou, G. (2019). Introducing functionality to fluorinated electroactive polymers. Macromolecules, 52(21), 8503-8513. (sam) (hal)
  55. Kallel, A. C., Koutiri, I., Babaeitorkamani, E., Khavandi, A., Tamizifar, M., Shirinbayan, M., & Tcharkhtchi, A. (2019). Study of bonding formation between the filaments of PLA in FFF process. International Polymer Processing, 34(4), 434-444. (sam) (hal)
  56. Lacuve, M., Colin, X., Perrin, L., Flandin, L., Notingher, P., Tourcher, C., . . . Tanzeghti, H. (2019). Investigation and modelling of the water transport properties in unfilled EPDM elastomers. Polymer Degradation and Stability, 168, Article number 108949 (sam) (hal)
  57. Laamouri, A., Ghanem, F., Braham, C., & Sidhom, H. (2019). Influences of up-milling and down-milling on surface integrity and fatigue strength of X160CrMoV12 steel. International Journal of Advanced Manufacturing Technology, 105(1-4), 1209-1228. (sam) (hal)
  58. Lamri, A., Shirinbayan, M., Pereira, M., Truffault, L., Fitoussi, J., Lamouri, S., . . . Tcharkhtchi, A. (2019). Effects of strain rate and temperature on the mechanical behavior of high-density polyethylene. Journal of Applied Polymer Science, Article number 48778 (sam) (hal)

  59. Lapouge, P., Dirrenberger, J., Coste, F., & Schneider, M. (2019). Laser heat treatment of martensitic steel and dual-phase steel with high martensite content. Materials Science and Engineering A, 752, 128-135. (sam) (hal)

  60. Lauzeral, N., Borzacchiello, D., Kugler, M., George, D., Rémond, Y., Hostettler, A., & Chinesta, F. (2019). A model order reduction approach to create patient-specific mechanical models of human liver in computational medicine applications. Computer Methods and Programs in Biomedicine, 170, 95-106.
    (sam) (hal)
  61. Lauzeral, N., Borzacchiello, D., Kugler, M., George, D., Rémond, Y., Hostettler, A., & Chinesta, F. (2019). Shape parametrization of bio-mechanical finite element models based on medical images. Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization, 7(5-6), 480-489.  (sam) (hal)
  62. Laverne, F., Marquardt, R., Segonds, F., Koutiri, I., & Perry, N. (2019). Improving resources consumption of additive manufacturing use during early design stages: A case study. International Journal of Sustainable Engineering, 12(6), 365-375. (sam) (hal)
  63. Le Bras, C., Rondepierre, A., Seddik, R., Scius-Bertrand, M., Rouchausse, Y., Videau, L., . . . Berthe, L. (2019). Laser shock peening: Toward the tse of pliable polid polymers for confinement. Metals, 9(7) , Article number 793. (sam) (hal)
  64. Leon, A., Perez, M., Barasinski, A., Abisset-Chavanne, E., Defoort, B., & Chinesta, F. (2019). Multi-scale modeling and simulation of thermoplastic automated tape placement: Effects of metallic particles reinforcement on part consolidation. Nanomaterials, 9(5) , Article number 695 (sam) (hal)
  65. Leon, A., Argerich, C., Barasinski, A., Soccard, E., & Chinesta, F. (2019). Effects of material and process parameters on in-situ consolidation. International Journal of Material Forming, 12(4), 491-503. (sam) (hal)
  66. Leon, A., Mueller, S., de Luca, P., Said, R., Duval, J. -., & Chinesta, F. (2019). Non-intrusive proper generalized decomposition involving space and parameters: Application to the mechanical modeling of 3D woven fabrics. Advanced Modeling and Simulation in Engineering Sciences, 6(1), Article number 13. (sam) (hal)

  67. Lizundia, E., Penayo, M. C., Guinault, A., Vilas, J. L., & Domenek, S. (2019). Impact of ZnO nanoparticle morphology on relaxation and transport properties of PLA nanocomposites. Polymer Testing, 75, 175-184. (sam) (hal)

  68. Lu, X., Detrez, F., Roland, S. (2019) Numerical study of the relationship between the spherulitic microstructure and isothermal crystallization kinetics. Part I. 2-D analyses 179, art. no. 121642. (sam) (hal)
  69. Lucas, A., Danlos, A., Shirinbayan, M., Motaharinejad, V., Paridaens, R., Benfriha, K., & Tcharkhtchi, A. (2019). Conventional rotational molding process and aerodynamic characteristics of an axial-flow hollow blades rotor. The International Journal of Advanced Manufacturing Technology, 1-12. (sam) (hal)
  70. Ly, H. -., Monteiro, E., Le, T. -., Le, V. M., Dal, M., Regnier, G., & Pham, B. T. (2019). Prediction and sensitivity analysis of bubble dissolution time in 3D selective laser sintering using ensemble decision trees. Materials, 12(9) Article number 1544  (sam) (hal)
  71. Marciszko-Wiackowska, M., Oponowicz, A., Baczmański, A., Wróbel, M., Braham, C., & Wawszczak, R. (2019). Multireflection grazing-incidence X-ray diffraction: A new approach to experimental data analysis. Journal of Applied Crystallography, 52, 1409-1421.  (sam) (hal)
  72. Meftah, H., Tamboura, S., Fitoussi, J., BenDaly, H., & Tcharkhtchi, A. (2019). Thermal aging influence on the damage mechanisms of fully recycled composite-reinforced polypropylene/polyethylene blend. Polymer Composites, 40(8), 3342-3350.  (sam) (hal)
  73. Meng, L., Goyal, A., Doquet, V., Ranc, N., & Couzinié, J. -. (2019). Ultrafine versus coarse grained al 5083 alloys: From low-cycle to very-high-cycle fatigue. International Journal of Fatigue, 121, 84-97.  (sam) (hal)
  74. Messin, T., Marais, S., Follain, N., Chappey, C., Guinault, A., Miquelard-Garnier, G., . . . Sollogoub, C. (2019). Impact of water and thermal induced crystallizations in a PC/MXD6 multilayer film on barrier properties. European Polymer Journal, 111, 152-160. (sam) (hal)
  75. Minard, Gaelle., Colin, Xavier. (2019). Thermal Ageing of a Hybrid Composite Rod for Next Generation Overhead Power Lines. Journal of Composites Science, 103 (3), 1-25. (sam) (hal)
  76. Montáns, F. J., Chinesta, F., Gómez-Bombarelli, R., & Kutz, J. N. (2019). Complex Algorithms for Data-Driven Model Learning in Science and Engineering. Comptes Rendus - Mecanique, 347(11), 845-855. (sam) (hal)

  77. Morin, L., Brenner, R., & Suquet, P. (2019). Numerical simulation of model problems in plasticity based on field dislocation mechanics. Modelling and Simulation in Materials Science and Engineering, 27(8) Article number 085012 (sam) (hal)

  78. Montagud, S., Aguado, J. V., Chinesta, F., & Joyot, P. (2020). Parametric inverse impulse response based on reduced order modeling and randomized excitations. Mechanical Systems and Signal Processing, 135 , Article number 106392 (sam) (hal)

  79. Moya, B., Gonzalez, D., Alfaro, I., Chinesta, F., & Cueto, E. (2019). Learning slosh dynamics by means of data. Computational Mechanics, 64(2), 511-523.  (sam) (hal)

  80. Nait Abdelaziz, M., Ayoub, G., Colin, X., Benhassine, M., & Mouwakeh, M. (2019). New developments in fracture of rubbers: Predictive tools and influence of thermal aging. International Journal of Solids and Structures, 165, 127-136. (sam) (hal)

  81. Nguyen, J. -., Pomes, B., Sadoun, M., & Richaud, E. (2019). Curing of urethane dimetracrylate composites: A glass transition study. Polymer Testing, 80, Article number 106113.(sam) (hal)
  82. Ors, T., Ranc, N., Pelerin, M., Michel, V., Favier, V., Castelnau, O., . . . Thiaudière, D. (2019). Microsecond time-resolved X-ray diffraction for the investigation of fatigue behavior during ultrasonic fatigue loading. Journal of Synchrotron Radiation, 26, 1660-1670. (sam) (hal)
  83. Payet, M., Marchetti, L., Tabarant, M., Jomard, F., & Chevalier, J. -. (2019). Corrosion mechanisms of 316L stainless steel in supercritical water: The significant effect of work hardening induced by surface finishes. Corrosion Science, 157, 157-166.  (sam) (hal)
  84. Perez, M., Scheuer, A., Abisset-Chavanne, E., Ammar, A., Chinesta, F., & Keunings, R. (2019). On the multi-scale description of micro-structured fluids composed of aggregating rods. Continuum Mechanics and Thermodynamics, 31(4), 955-967. (sam) (hal)
  85. Plancher, E., Tajdary, P., Auger, T., Castelnau, O., Favier, V., Loisnard, D., . . . Stodolna, J. (2019). Validity of crystal plasticity models near grain boundaries: Contribution of elastic strain measurements at micron scale. JOM, 71(10), 3543-3551. (sam) (hal)
  86. Quaranta, G., Ziane, M., Daim, F., Abisset-Chavanne, E., Duval, J. -., & Chinesta, F. (2019). On the coupling of local 3D solutions and global 2D shell theory in structural mechanics. Advanced Modeling and Simulation in Engineering Sciences, 6(1), Article number 1. (sam)  (hal)
  87. Quaranta, G., Argerich Martin, C., Ibañez, R., Duval, J. L., Cueto, E., & Chinesta, F. (2019). From linear to nonlinear PGD-based parametric structural dynamics. Comptes Rendus - Mecanique, 347(5), 445-454.  (sam) (hal)
  88. Quaranta, G., Lopez, E., Abisset-Chavanne, E., Duval, J. L., Huerta, A., & Chinesta, F. (2019). Structural health monitoring by combining machine learning and dimensionality reduction techniques. Revista Internacional De Metodos Numericos Para Calculo y Diseno En Ingenieria, 35(1), Article number 20. (sam) (hal)
  89. Quaranta, G., Ziane, M., Haug, E., Duval, J.-L., Chinesta, F. (2019). A minimally-intrusive fully 3D separated plate formulation in computational structural mechanics Advanced Modeling and Simulation in Engineering Sciences, 6 (1), art. no. 11. (sam) (hal)

  90. Reille, A., Hascoet, N., Ghnatios, C., Ammar, A., Cueto, E., Duval, J. L., Chinesta, F., Keunings, R. (2019). Incremental dynamic mode decomposition: A reduced-model learner operating at the low-data limit. Comptes Rendus - Mecanique, 347(11), 780-792. (sam) (hal)

  91. Ribe, N. M., Hielscher, R., & Castelnau, O. (2019). An analytical finite-strain parametrization for texture evolution in deforming olivine polycrystals. Geophysical Journal International, 216(1), 486-514. (sam) (hal)

  92. Richaud, E., Guinault, A., Baiz, S., & Nizeyimana, F. (2019). Epoxidized linseed oils based networks. case of thermal degradation. Polymer Degradation and Stability, 166, 121-134. (sam) (hal)

  93. Rhouma, A. B., Sidhom, N., Makhlouf, K., Sidhom, H., Braham, C., & Gonzalez, G. (2019). Effect of machining processes on the residual stress distribution heterogeneities and their consequences on the stress corrosion cracking resistance of AISI 316L SS in chloride medium. International Journal of Advanced Manufacturing Technology, 105(1-4), 1699-1711.  (sam) (hal)

  94. Romero-Resendiz, L., Figueroa, I. A., Reyes-Ruiz, C., Cabrera, J. M., Braham, C., & Gonzalez, G. (2019). Residual stresses and microstructural evolution of ECAPed AA2017. Materials Characterization, 152, 44-57. (sam) (hal)

  95. Sagnard, M., Ecault, R., Touchard, F., Boustie, M., & Berthe, L. (2019). Development of the symmetrical laser shock test for weak bond inspection. Optics and Laser Technology, 111, 644-652. (sam) (hal)

  96. Sapena-Bano, A., Chinesta, F., Pineda-Sanchez, M., Aguado, J. V., Borzacchiello, D., & Puche-Panadero, R. (2019). Induction machine model with finite element accuracy for condition monitoring running in real time using hardware in the loop system. International Journal of Electrical Power and Energy Systems, 111, 315-324. (sam) (hal)
  97. Sergeant, A., Mangeney, A., Yastrebov, V. A., Walter, F., Montagner, J. -., Castelnau, O., Luckman, A. (2019). Monitoring greenland ice sheet buoyancy-driven calving discharge using glacial earthquakes. Annals of Glaciology, 1-21 .
    (sam) (hal)
  98. Shirinbayan, M., Fitoussi, J., Meraghni, F., Farzaneh, S., Surowiec, B., Tcharkhtchi, A. (2019).  Effect of a Post-Fatigue Damage on the Residual Dynamic Behavior of Advanced-SMC Composites. Applied Composite Materials, 26 ( 5-6), 1313-1331. (sam) (hal)
  99. Spagnuolo, M., Peyre, P., & Dupuy, C. (2019). Phenomenological aspects of quasi-perfect pivots in metallic pantographic structures. Mechanics Research Communications, 101, Article number 103415. (sam) (hal)
  100. Tertrais, H., Ibañez, R., Barasinski, A., Ghnatios, C., & Chinesta, F. (2019). On the proper generalized decomposition applied to microwave processes involving multilayered components. Mathematics and Computers in Simulation, 156, 347-363. (sam) (hal)
  101. Tencé-Girault, S., Lebreton, S., Bunau, O., Dang, P., & Bargain, F. (2019). Simultaneous SAXS-WAXS experiments on semi-crystalline polymers: Example of PA11 and its brill transition. Crystals, 9(5), Article number 271. (sam) (hal)
  102. Vittal Shenoy, D., Safdari Shadloo, M., Peixinho, J., & Hadjadj, A. (2019). Direct numerical simulations of laminar and transitional flows in diverging pipes. International Journal of Numerical Methods for Heat and Fluid Flow, 30(1), 75-92. (sam)  (hal)

  103. Wang, Z. -., Poh, L. H., Zhu, Y., Dirrenberger, J., & Forest, S. (2019). Systematic design of tetra-petals auxetic structures with stiffness constraint. Materials and Design, 170, Article number 107669. (sam) (hal)

  104. Yang, S., Dirrenberger, J., Monteiro, E., & Ranc, N. (2019). Representative volume element size determination for viscoplastic properties in polycrystalline materials. International Journal of Solids and Structures, 158, 210-219.  (sam) (hal)

  105. Zuo, P., Tcharkhtchi, A., Shirinbayan, M., Fitoussi, J., & Bakir, F. (2019). Multiscale physicochemical characterization of a short glass fiber–reinforced polyphenylene sulfide composite under aging and its thermo-oxidative mechanism. Polymers for Advanced Technologies, 30(3), 584-597.
    (sam) (hal)
  106. Zuo, P., Fitoussi, J., Shirinbayan, M., Bakir, F., & Tcharkhtchi, A. (2019). Thermal aging effects on overall mechanical behavior of short glass fiber-reinforced polyphenylene sulfide composites. Polymer Engineering and Science, 59(4), 765-772. (sam) (hal)