1. Achour, N., Chatzigeorgiou, G., Meraghni, F., Chemisky, Y., & Fitoussi, J. (2015). Implicit implementation and consistent tangent modulus of a viscoplastic model for polymers. International Journal of Mechanical Sciences, 103, 297-305. (sam) (hal)
  2. Al-Jallad, M., Atassi, Y., Mounif, E., Aressy, M., & Tcharkhtchi, A. (2014). Oxidative solution polymerization of aniline hydrochloride onto electrospun nanofibers mats of polylactic acid: Preparation method and characterization. Journal of Applied Polymer Science, 132(11) (sam) (hal)
  3. Amara, E. H., Kheloufi, K., Tamsaout, T., Fabbro, R., & Hirano, K. (2015). Numerical investigations on high-power laser cutting of metals. Applied Physics A: Materials Science and Processing, 119(4), 1245-1260. (sam) (hal)
  4. Arrigoni, M., Schalk, M., Carrère, N., Alexandru, A., Cojan, B., Boustie, M., & Berthe, L. (2015). Étude expérimentale et numérique de l'adhérence d'interfaces collées soumises à des ondes mécaniques brèves et intenses essais d'adhérence par choc. Revue Des Composites Et Des Materiaux Avances, 25(2), 201-223. (sam) (hal)
  5. Auffray, N., Dirrenberger, J., & Rosi, G. (2015). A complete description of bi-dimensional anisotropic strain-gradient elasticity. International Journal of Solids and Structures, 69(70), 195-206. (sam) (hal)
  6. Baroudi, I., Simonnet-Jégat, C., Roch-Marchal, C., Leclerc-Laronze, N., Livage, C., Martineau, C., Gervais, C., Cadot, E., Carn, F., Fayolle, B., Steunou, N. (2015). Supramolecular assembly of gelatin and inorganic polyanions: Fine-tuning the mechanical properties of nanocomposites by varying their composition and microstructure. Chemistry of Materials, 27(5), 1452-1464. (sam) (hal)
  7. Blackmur, M. S., Robson, J. D., Preuss, M., Zanellato, O., Cernik, R. J., Shi, S. -., Andrieux, J. (2015). Zirconium hydride precipitation kinetics in zircaloy-4 observed with synchrotron X-ray diffraction. Journal of Nuclear Materials, 464, 160-169. (sam) (hal)
  8. Blanche, A., Chrysochoos, A., Ranc, N., & Favier, V. (2015). Dissipation assessments during dynamic very high cycle fatigue tests. Experimental Mechanics, 55(4), 699-709. (sam) (hal)
  9. Casalino, G., Mortello, M., & Peyre, P. (2015). Yb-YAG laser offset welding of AA5754 and T40 butt joint. Journal of Materials Processing Technology, 223, 139-149. (sam) (hal)
  10. Courapied, D., Berthe, L., Peyre, P., Coste, F., Zou, J. -., & Sautivet, A. -. (2015). Laser-delayed double shock-wave generation in water-confinement regime. Journal of Laser Applications, S1, 27(S2). (sam) (hal)
  11. Detrez, F., Castelnau, O., Cordier, P., Merkel, S., & Raterron, P. (2015). Effective viscoplastic behavior of polycrystalline aggregates lacking four independent slip systems inferred from homogenization methods; application to olivine. Journal of the Mechanics and Physics of Solids, 83, 199-220. (sam) (hal)
  12. Diani, J., Brieu, M., Batzler, K., & Zerlauth, P. (2015). Effect of the mullins softening on mode I fracture of carbon-black filled rubbers. International Journal of Fracture, 194(1), 11-18. (sam) (hal)
  13. Diani, J., Gilormini, P., & Arrieta, J. S. (2015). Direct experimental evidence of time-temperature superposition at finite strain for an amorphous polymer network. Polymer (United Kingdom), 58, 107-112. (sam) (hal)
  14. Dirany, M., Dies, L., Restagno, F., Léger, L., Poulard, C., & Miquelard-Garnier, G. (2015). Chemical modification of PDMS surface without impacting the viscoelasticity: Model systems for a better understanding of elastomer/elastomer adhesion and friction. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 468, 174-183. (sam) (hal)
  15. Drissi, S., Eddhahak, A., Caré, S. & Neji, J. (2015). Thermal analysis by DSC of Phase Change Materials, study of the damage effect. Journal of Building Engineering, 1, 13-19. (sam) (hal)
  16. Ecault, R., Berthe, L., Touchard, F., Boustie, M., Lescoute, E., Sollier, A., & Voillaume, H. (2015). Experimental and numerical investigations of shock and shear wave propagation induced by femtosecond laser irradiation in epoxy resins. Journal of Physics D: Applied Physics, 48(9). (sam) (hal)
  17. Eddhahak, A., & Zidi, M. (2015). Influence of viscoelastic properties of an hyaluronic acid-based hydrogel on viability of mesenchymal stem cells. Bio-Medical Materials and Engineering, 26(3-4), 103-114. (sam) (hal)
  18. Eddhahak, A., Vandamme, M., & Vu, V. T. (2015). Micromechanical contribution for the prediction of the viscoelastic properties of high rate recycled asphalt and influence of the level blending. Archives of Civil and Mechanical Engineering, 15(4), 1037-1045. (sam) (hal)
  19. El Yagoubi, J., Lubineau, G., Traidia, A., & Verdu, J. (2014). Monitoring and simulations of hydrolysis in epoxy matrix composites during hygrothermal aging. Composites Part A: Applied Science and Manufacturing, 68, 184-192. (sam) (hal)
  20. Faurie, D., Djemia, P., Castelnau, O., Brenner, R., Belliard, L., Le Bourhis, E., Renault, P.(2015). Peculiar effective elastic anisotropy of nanometric multilayers studied by surface brillouin scattering. Superlattices and Microstructures, 88, 551-560. (sam) (hal)
  21. Francois-Heude, A., Richaud, E., Desnoux, E., & Colin, X. (2015). A general kinetic model for the photothermal oxidation of polypropylene. Journal of Photochemistry and Photobiology A: Chemistry, 296, 48-65. (sam) (hal)
  22. François-Heude, A., Richaud, E., Guinault, A., Desnoux, E., & Colin, X. (2015). Impact of oxygen transport properties on polypropylene thermal oxidation, part 1: Effect of oxygen solubility. Journal of Applied Polymer Science, 132(5). (sam) (hal)
  23. François-Heude, A., Richaud, E., Guinault, A., Desnoux, E., & Colin, X. (2015). Impact of oxygen transport properties on the kinetic modeling of polypropylene thermal oxidation. II. effect of oxygen diffusivity. Journal of Applied Polymer Science, 132(6). (sam) (hal)
  24. Gilormini, P., & Diani, J. (2015). Testing some implementations of a cohesive-zone model at finite strain. Engineering Fracture Mechanics, 148, 97-109. (sam) (hal)
  25. Goulding, N. J., Ribe, N. M., Castelnau, O., Walker, A. M., & Wookey, J. (2015). Analytical parametrization of self-consistent polycrystal mechanics: Fast calculation of upper mantle anisotropy. Geophysical Journal International, 203(1), 334-350. (sam) (hal)
  26. Gu, T., Herve-Luanco, E., Proudhon, H., Thilly, L., Dubois, J. -., Lecouturier, F., Castelnau, O, Forest, S. (2015). Multiscale modeling of the electrical behavior of cu-nb nano-composites. [Modélisation multi-échelle du comportement électrique de nano-composites Cu-Nb] Materiaux Et Techniques, 103(3) . (sam) (hal)
  27. Hajrya, R, Mechbal, N. (2015),  Perturbation analysis for robust damage detection with application to multifunctional aircraft structures, Smart Structures and Systems 16 (3), 435-457. (sam) (hal)
  28. Hamidi, A., Khelladi, S., Illoul, L., Shirinbayan, M., Bakir, F., & Tcharkhtchi, A. (2015). Modelling surface tension with smoothed particle hydrodynamics in reactive rotational moulding. Computers and Fluids, 118, 191-203. (sam) (hal)
  29. Hfaiedh, N., Peyre, P., Song, H., Popa, I., Ji, V., & Vignal, V. (2015). Finite element analysis of laser shock peening of 2050-T8 aluminum alloy. International Journal of Fatigue, 70, 480-489. (sam) (hal)
  30. Kromer, R., Costil, S., Cormier, J., Courapied, D., Berthe, L., Peyre, P., & Boustie, M. (2015). Laser surface patterning to enhance adhesion of plasma sprayed coatings. Surface and Coatings Technology, 278, 171-182. (sam) (hal)
  31. Mabrouk, W., Ogier, L., Sollogoub, C., Vidal, S., Matoussi, F., & Fauvarque, J. F. (2015). Synthesis and characterization of new membranes deriving from sulfonated polyethersulfone for PEMFC applications. Desalination and Water Treatment, 56(10), 2637-2645. (sam) (hal)
  32. Maimaitiyili, T., Blomqvist, J., Steuwer, A., Bjerkén, C., Zanellato, O., Blackmur, M. S., Ribeiro, F. (2015). In situ hydrogen loading on zirconium powder. Journal of Synchrotron Radiation, 22, 995-1000. (sam) (hal)
  33. Marciszko, M., Baczmański, A., Wróbel, M., Seiler, W., Braham, C., Wroński, S., & Wawszczak, R. (2015). Problem of elastic anisotropy and stacking faults in stress analysis using multireflection grazing-incidence X-ray diffraction. Journal of Applied Crystallography, 48, 492-509. (sam) (hal)
  34. Massat, J. -., Balmes, E., Bianchi, J. -., & Van Kalsbeek, G. (2015). OSCAR statement of methods. Vehicle System Dynamics, 53(3), 370-379. (sam) (hal)
  35. Mechbal, N., & Nõbrega, E. G. O. (2015). Spatial H∞ approach to damage-tolerant active control. Structural Control and Health Monitoring, 22(9), 1148-1172. (sam) (hal)
  36. Mechbal, N., Uribe, J. S., & Rébillat, M. (2015). A probabilistic multi-class classifier for structural health monitoring. Mechanical Systems and Signal Processing, 60, 106-123. (sam) (sam) (hal)
  37. Monnier, X., Delpouve, N., Basson, N., Guinault, A., Domenek, S., Saiter, A., Dargent, E. (2015). Molecular dynamics in electrospun amorphous plasticized polylactide fibers. Polymer (United Kingdom), 73, 68-78. (sam) (hal)
  38. Muller, M., El-Rabii, H., & Fabbro, R. (2015). Liquid phase combustion of iron in an oxygen atmosphere. Journal of Materials Science, 50(9), 3337-3350. (sam) (hal)
  39. Muránsky, O., Hamelin, C. J., Patel, V. I., Luzin, V., & Braham, C. (2015). The influence of constitutive material models on accumulated plastic strain in finite element weld analyses. International Journal of Solids and Structures, 69(70), 518-530. (sam) (hal)
  40. Nistor, M., Millon, E., Cachoncinlle, C., Seiler, W., Jedrecy, N., Hebert, C., & Perrière, J. (2015). Transparent conductive nd-doped ZnO thin films. Journal of Physics D: Applied Physics, 48(19) (sam) (hal)
  41. Okamba-Diogo, O., Richaud, E., Verdu, J., Fernagut, F., Guilment, J., & Fayolle, B. (2015). Molecular and macromolecular structure changes in polyamide 11 during thermal oxidation - kinetic modeling. Polymer Degradation and Stability, 120, 76-87. (sam) (hal)
  42. Pang, S., Hirano, K., Fabbro, R., & Jiang, T. (2015). Explanation of penetration depth variation during laser welding under variable ambient pressure. Journal of Laser Applications, 27(2). (sam) (hal)
  43. Payet, M., Marchetti, L., Tabarant, M., & Chevalier, J. -. (2015). Corrosion mechanism of a ni-based alloy in supercritical water: Impact of surface plastic deformation. Corrosion Science, 100, 47-56. (sam) (hal)
  44. Petit, J., Castelnau, O., Bornert, M., Zhang, F. G., Hofmann, F., Korsunsky, A. M., Ulrich, O. (2015). Laue-DIC: A new method for improved stress field measurements at the micrometer scale. Journal of Synchrotron Radiation, 22, 980-994. (sam) (hal)
  45. Peyre, P., Rouchausse, Y., Defauchy, D., & Régnier, G. (2015). Experimental and numerical analysis of the selective laser sintering (SLS) of PA12 and PEKK semi-crystalline polymers. Journal of Materials Processing Technology, 225, 326-336. (sam) (hal)
  46. Phung, N. L., Favier, V., & Ranc, N. (2015). Evaluating schmid criterion for predicting preferential locations of persistent slip markings obtained after very high cycle fatigue for polycrystalline pure copper. International Journal of Fatigue, 77, 115-127 (sam) (hal)
  47. Ranc, N., Blanche, A., Ryckelynck, D., & Chrysochoos, A. (2015). POD preprocessing of IR thermal data to assess heat source distributions. Experimental Mechanics, 55(4), 725-739. (sam) (hal)
  48. Reyes-Ruiz, C., Figueroa, I. A., Braham, C., Cabrera, J. M., Alfonso, I., & Gonzalez, G. (2015). Texture and lattice distortion study of an al-6061-T6 alloy produced by ECAP. Materials Transactions, 56(11), 1781-1786. (sam) (hal)
  49. Richaud, E., Derue, I., Gilormini, P., Verdu, J., Vaulot, C., Coquillat, M., Vandenbrouke, A. (2015). Plasticizer effect on network structure and hydrolytic degradation. European Polymer Journal, 69, 232-246. (sam) (hal)
  50. Richaud, E., Djouani, F., Fayolle, B., Verdu, J., & Flaconneche, B. (2015). New insights in polymer-biofuels interaction. [Avancées dans la compréhension des interactions polymères-biocarburants] Oil and Gas Science and Technology, 70(2), 317-333. (sam) (hal)
  51. Roy, S. C., Franc, J. -., Ranc, N., & Fivel, M. (2015). Determination of cavitation load spectra-part 2: Dynamic finite element approach. Wear, 344-345, 120-129. (sam) (hal)
  52. Ruellan, A., Guinault, A., Sollogoub, C., Chollet, G., Ait-Mada, A., Ducruet, V., & Domenek, S. (2015). Industrial vegetable oil by-products increase the ductility of polylactide. Express Polymer Letters, 9(12), 1087-1103. (sam) (hal)
  53. Ruellan, A., Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S. (2015). Solubility factors as screening tools of biodegradable toughening agents of polylactide. Journal of Applied Polymer Science, 132(48) (sam) (hal)
  54. Seiler, W., Selmane, M., Abdelouhadi, K., & Perrière, J. (2015). Epitaxial growth of gallium oxide films on c-cut sapphire substrate. Thin Solid Films, 589, 556-562. (sam) (hal)
  55. Shirinbayan, M., Fitoussi, J., Meraghni, F., Surowiec, B., Bocquet, M., & Tcharkhtchi, A. (2015). High strain rate visco-damageable behavior of advanced sheet molding compound (A-SMC) under tension. Composites Part B: Engineering, 82, 30-41. (sam) (hal)
  56. Sidhom, H., Yahyaoui, H., Braham, C., & Gonzalez, G. (2015). Analysis of the deformation and damage mechanisms of pearlitic steel by EBSD and “in-situ” SEM tensile tests. Journal of Materials Engineering and Performance, 24(7), 2586-2596. (sam) (hal)
  57. Soccalingame, L., Perrin, D., Bénézet, J. -., Mani, S., Coiffier, F., Richaud, E., & Bergeret, A. (2015). Reprocessing of artificial UV-weathered wood flour reinforced polypropylene composites. Polymer Degradation and Stability, 120, 313-327. (sam) (hal)
  58. Teyssèdre, H., Landis, S., Gilormini, P., & Régnier, G. (2015). Influence of thermal diffusion and shear thinning during the leveling of nanoimprinted patterns in a polystyrene thin film. Applied Physics A: Materials Science and Processing, 121, 387-397. (sam) (hal)
  59. Tomashchuk, I., Sallamand, P., Cicala, E., Peyre, P., & Grevey, D. (2015). Direct keyhole laser welding of aluminum alloy AA5754 to titanium alloy Ti6Al4V. Journal of Materials Processing Technology, 217, 96-104. (sam) (hal)
  60. Touchard, F., Berthe, L., Malinowski, P., Opoka, S., Boustie, M., Chocinski-Arnault, L., & Ostachowicz, W. (2015). Comparison of damage behaviour of different plant fibre composites under laser impact loading. Materiaux Et Techniques, 103(1). (sam) (hal)
  61. Toulemonde, P. -., Diani, J., Gilormini, P., & Desgardin, N. (2015). A numerical study of the influence of polydispersity on the behaviour until break of a reinforced hyperelastic material with a cohesive interface. Materiaux Et Techniques, 103(3). (sam) (hal)
  62. Wauthier-Monnin, A., Chauveau, T., Castelnau, O., Réglé, H., & Bacroix, B. (2015). The evolution with strain of the stored energy in different texture components of cold-rolled if steel revealed by high resolution X-ray diffraction. Materials Characterization, 104, 31-41. (sam) (hal)
  63. Yahyaoui, H., Ben Moussa, N., Braham, C., Ben Fredj, N., & Sidhom, H. (2015). Role of machining defects and residual stress on the AISI 304 fatigue crack nucleation. Fatigue and Fracture of Engineering Materials and Structures, 38(4), 420-433. (sam) (hal)
  64. Zhang, F. G., Castelnau, O., Bornert, M., Petit, J., Marijon, J. B., & Plancher, E. (2015). Determination of deviatoric elastic strain and lattice orientation by applying digital image correlation to laue microdiffraction images: The enhanced laue-DIC method. Journal of Applied Crystallography, 48, 1805-1817.  (sam) (hal)