1. Abbasnezhad, N., Zirak, N., Shirinbayan, M., Kouidri, S., Salahinejad, E., Tcharkhtchi, A., & Bakir, F. (2021). Controlled release from polyurethane films: Drug release mechanisms. Journal of Applied Polymer Science, 138(12) Article number 50083 (sam) (hal)
  2. Abbasnezhad, N., Zirak, N., Shirinbayan, M., Tcharkhtchi, A., & Bakir, F. (2021). On the importance of physical and mechanical properties of PLGA films during drug release. Journal of Drug Delivery Science and Technology, 63, Article number 102446(sam) (hal)
  3. Abbasnezhad, N., Kebdani, M., Shirinbayan, M., Champmartin, S., Tcharkhtchi, A., Kouidri, S., & Bakir, F. (2021). Development of a model based on physical mechanisms for the explanation of drug release: Application to diclofenac release from polyurethane films. Polymers, 13(8), Article number 1230. (sam) (hal)
  4. Abbasnezhad, N., Shirinbayan, M., Chabi, F., Champmartin, S., Tcharkhtchi, A., & Bakir, F. (2021). Viscoelastic behavior of drug-loaded polyurethane. Polymers, 13(16) , art. no. 2608. (sam) (hal)

  5. Abdessalem, A., Tamboura, S., Fitoussi, J., Daly, H. B., Tcharkhtchi, A., & Meraghni, F. (2021). Microstructure investigation of hydrothermal damage of aged SMC composites using micro-computed tomography and scanning electron microscopy. Engineering Failure Analysis, 121, Article number 105177(sam) ((hal)

  6. Ahn, Y., Colin, X., & Roma, G. (2021). Atomic scale mechanisms controlling the oxidation of polyethylene: A first principles study. Polymers, 13(13) , art. no. 2143. (sam) (hal)

  7. Andreau, O., Pessard, E., Koutiri, I., Peyre, P., & Saintier, N. (2021). Influence of the position and size of various deterministic defects on the high cycle fatigue resistance of a 316L steel manufactured by laser powder bed fusion. International Journal of Fatigue, 143 , Article number 105930 (sam) (hal)
  8. Bahry, T., Cui, Z., Dazzi, A., Gervais, M., Sollogoub, C., Goubard, F., . . . Remita, S. (2021). Radiation-induced polymerization of 3-hexylthiophene in oxygen-free and oxygen-saturated dichloromethane solvent. Radiation Physics and Chemistry, 180 , Article number 109291 (sam) (hal)

  9. Bahry, T., Khurshid, B., Chouli, Y., Abou Zeid, S., Sollogoub, C., Gervais, M., . . . Remita, S. (2021). Gamma rays as an innovative tool for synthesizing conducting copolymers with improved properties. New Journal of Chemistry, 45(29), 13142-13157. (sam) (hal)

  10. Barasinski, A., Ghnatios, C., Abenius, E., Bechtel, S., & Chinesta, F. (2021). Electromagnetic field propagation in a composite laminate and induced thermal field: Application to microwave composites processing. International Journal of Material Forming, 14(1), 97-103. (sam) (hal)

  11. Bargain, F., Thuau, D., Hadziioannou, G., Domingues Dos Santos, F., & Tencé-Girault, S. (2021). Phase diagram of poly(VDF-ter-TrFE-ter-CTFE) copolymers: Relationship between crystalline structure and material properties. Polymer, 213 doi:10.1016/j.polymer. Article number 123203(sam) (hal)

  12. Ben Abdallah, A., Gamaoun, F., Kallel, A., & Tcharkhtchi, A. (2021). Molecular weight influence on shape memory effect of shape memory polymer blend (poly(caprolactone)/styrene-butadiene-styrene). Journal of Applied Polymer Science, 138(5),  Article number 49761 (sam) (hal)
  13. Briand, W., Rébillat, M., Guskov, M., & Mechbal, N. (2021). Upcoming damage size quantification in aeronautic composite structures based on imaging results post-processing. Journal of Intelligent Material Systems and Structures,  Article Number: 1045389X211011680  (sam) (hal)

  14. Castelnau, O., Derrien, K., Ritterbex, S., Carrez, P., Cordier, P., & Moulinec, H. (2021). Multiscale modeling of the effective viscoplastic behavior of Mg2SiO4 wadsleyite: Bridging atomic and polycrystal scales. Comptes Rendus - Mecanique, 348(10), 827-846. (sam) (hal)

  15. Chebil, Mohamed Souheib ., Bouaoulo, Guillaume ., Gerard, Pierre., EL Euch, Salma ., Issard, Hervé ., Richaud, Emmanuel. (2021). Oxidation and unzipping in ELIUM resin: Kinetic model for mass loss. Polymer Degradation and Stability. 186. Article number 109523 (sam) (hal)

  16. Cherif, R., Eddhahak, A., Gabet, T., Hammoum, F., & Neji, J. (2021). Effect of the processing conditions on the viscoelastic properties of a high-RAP recycled asphalt mixture: Micromechanical and experimental approaches. International Journal of Pavement Engineering, 22(6), 708-717. (sam) (hal)

  17. Chevalier, X; Correia, CG; Pound-Lana, G; Bezard, P; Serege, M; Petit-Etienne, C; Gay, G; Cunge, G; Cabannes-Boue, B; Nicolet, C; Navarro, C; Cayrefourcq, I; Muller, M; Hadziioannou, G; Iliopoulos, I; Fleury, G; Zelsmann, M. (2021). Lithographically Defined Cross-Linkable Top Coats for Nanomanufacturing with High-chi Block Copolymers. ACS APPLIED MATERIALS & INTERFACES. 13 (9) .  11224.11236. (sam) (hal)

  18. COLIN, X., ESSATBI, F., DELOZANNE, J., & MOREAU, G. (2021). A new analytical model for predicting the thermal oxidation kinetics of composite organic m atrices. application to diamine cross-linked epoxy. Polymer Degradation and Stability, 186 , Article number 109513 (sam) (hal)

  19. Colin, X., Delozanne, J., Moreau, G. New Advances in the Kinetic Modeling of Thermal Oxidation of Epoxy-Diamine Networks (2021) Frontiers in Materials, 8, art. no. 720455 (sam) (hal)

  20. Da Silva, S., Paixão, J., Rébillat, M., & Mechbal, N. (2021). Extrapolation of AR models using cubic splines for damage progression evaluation in composite structures. Journal of Intelligent Material Systems and Structures, 32(3), 284-295. (sam) (hal)

  21. De Francqueville, F., Diani, J., Gilormini, P., & Vandenbroucke, A. (2021). Use of a micromechanical approach to understand the mechanical behavior of solid propellants. Mechanics of Materials, 153 , Article number 103656 (sam) (hal)

  22. De Terris, Thibaut.,Castelnau, Olivier.,Hadjem-Hamouche, Zehoua.,Haddadi, Halim.,Michel, Vincent.,Peyre, Patrice. Analysis of As-Built Microstructures and Recrystallization Phenomena on Inconel 625 Alloy Obtained via Laser Powder Bed Fusion (L-PBF)}. Metals. 11(4). Article number 619 (sam) (hal)

  23. Delannoy, S., Baïz, S., Laheurte, P., Jordan, L., & Prima, F. (2021). Elastically graded titanium alloy produced by mechanical surface deformation. Frontiers in Materials, 8 , Article number 634236 (sam) (hal)

  24. Derouiche, K; Garois, S; Champaney, V; Daoud, M; Traidi, K; Chinesta, F . (2021). Data-Driven Modeling for Multiphysics Parametrized Problems-Application to Induction Hardening Process. METALS. 11(5) . Article Number 738. (sam) (hal)

  25. Dorhmi , Khaoula., Derrien, Katell., Hadjem-Hamouche, Zehoua., Morin, Léo., Bonnet, Frédéric., Chevalier, Jean-Pierre. (2021). Experimental study and micromechanical modelling of the effective elastic properties of Fe–TiB2 composites. Composite Structures, 272, Article numner 114122. (sam) (hal)

  26. Domenek, S., Berzin, F., Ducruet, V., Plessis, C., Dhakal, H., Richaud, E., Beaugrand, J. ( 2021). Extrusion and injection moulding induced degradation of date palm fibre - polypropylene composites. Polymer Degradation and Stability, 190, art. no. 109641.(sam) (hal)

  27. Ducousso, M.; Cuenca, E.; Marmonier, M.; Videau, L.; Coulouvrat, F.; Berthe, L. (2021) . Bulk Probing of Shock Wave Spatial Distribution in Opaque Solids by Ultrasonic Interaction. PHYSICAL REVIEW APPLIED. 15 (5). Article number L051002. (sam) (hal)

  28. Dupuy, C., Benabou, A., Shihab, S., Messal, O., Clénet, S., & Peyre, P. (2021). Influence of laser powder bed fusion process conditions and resulting microstructures on the electromagnetic properties of a 16MnCr5 steel. Additive Manufacturing, 41, Article number 113755(sam) (hal)

  29. Eddhahak, A. On a contribution to study some mechanical properties of WEEE recycled polymer blends
    (2021) Journal of Applied Polymer Science, Article number
    e51250 (sam) (hal)

  30. Frahi, T., Chinesta, F., Falcó, A., Badias, A., Cueto, E., Choi, H. Y., . . . Duval, J. -. (2021). Empowering advanced driver-assistance systems from topological data analysis. Mathematics, 9(6), Article number 113763 (sam) (hal)

  31. Frahi, T., Falco, A., Mau, B. V., Duval, J. L., & Chinesta, F. (2021). Empowering advanced parametric modes clustering from topological data analysis. Applied Sciences (Switzerland), 11(14), art. no. 6554. (sam) (hal)

  32. Ghnatios, C., Cueto, E., Falco, A., Duval, J. -., & Chinesta, F. (2021). Spurious-free interpolations for non-intrusive PGD-based parametric solutions: Application to composites forming processes. International Journal of Material Forming, 14(1), 83-95. (sam) (hal)

  33. Gong, X., Xiang, C., Auger, T., Chen, J., Liang, X., Yu, Z., . . . Yin, Y. (2021). Liquid metal embrittlement of a dual-phase Al0.7CoCrFeNi high-entropy alloy exposed to oxygen-saturated lead-bismuth eutectic. Scripta Materialia, 194 , Article number 113652 (sam) (hal)

  34. González, D., Chinesta, F., & Cueto, E. (2021). Learning non-markovian physics from data. Journal of Computational Physics, 428 Article number 109982 (sam) (hal)

  35. Guenoun, G., Schmitt, N., Roux, S., & Régnier, G. (2021). Crystalline orientation assessment in transversely isotropic semicrystalline polymer: Application to oedometric compaction of PTFE. Polymer Engineering and Science, 61(1), 107-114. (sam) (hal)

  36. Goutaudier, D., Berthe, L., & Chinesta, F. (2021). Proper generalized decomposition with time adaptive space separation for transient wave propagation problems in separable domains. Computer Methods in Applied Mechanics and Engineering, Article number 101945 (sam) (hal)

  37. Hernández, Q., Badías, A., González, D., Chinesta, F., & Cueto, E. (2021). Structure-preserving neural networks. Journal of Computational Physics, 426, Article number 109950 (sam) (hal)

  38. Hernandez, Q., Badías, A., González, D., Chinesta, F., & Cueto, E. (2021). Deep learning of thermodynamics-aware reduced-order models from data. Computer Methods in Applied Mechanics and Engineering, 379, Article number 634 (sam) (hal)

  39. Hettal, S., Roland, S., Sipila, K., Joki, H., & Colin, X. (2021). A new analytical model for predicting the radio-thermal oxidation kinetics and the lifetime of electric cable insulation in nuclear power plants. application to silane cross-linked polyethylene. Polymer Degradation and Stability, 185, Article number 109492 (sam) (hal)

  40. Huang, J., Yves Le Gac, P., & Richaud, E. (2021). Thermal oxidation of poly(dicyclopentadiene) - effect of phenolic and hindered amine stabilizers. Polymer Degradation and Stability, 183 , Article number 109267 (sam) (hal)

  41. Ibanez, R., Gilormini, P., Cueto, E., & Chinesta, F. (2021). Numerical experiments on unsupervised manifold learning applied to mechanical modeling of materials and structures. Comptes Rendus - Mecanique, 348(10-11), 937-958. (sam) (hal)

  42. Jacquemain , V. , Ranc,  N., Cheuleu,  C., Michel,  V. , Favier, V. , Castelnau , O. Vinci, D. Thiaudiere , D. Mocuta,  C. (2021). Estimation of stress in specimens loaded with ultrasonic fatigue machines. International Journal of Fatigue . 153 . Article number 106474. (sam) (hal)

  43. Jdidi, H., Fourati, N., Zerrouki, C., Ibos, L., Fois, M., Guinault, A., . . . Guermazi, H. (2021). Exploring the optical and dielectric properties of bifunctional and trifunctional epoxy polymers. Polymer, 228 , Article number 123882 (sam) (hal)

  44. Kallel, A., Abdallah, A. B., Gamaoun, F., Farzaneh, S., BenDaly, H., Fitoussi, J., & Tcharkhtchi, A. (2021). Driving force for shape memory effect of polymers. Journal of Polymer Research, 28(8) art. no. 308 (sam) (hal)

  45. Lamri, A., Lamouri, S., Kherroub, D. E., Hafsaoui, S. L., Bakir, F., & Tcharkhtchi, A. (2021). Study and modeling of high-density polyethylene coalescence under the extrussion conditions. International Journal of Material Forming, 14(2), 191-200. (sam) (hal)

  46. Le Gac, P. -. L., Albouy, P. -., Fayolle, B., & Verdu, J. (2021). Relationship between macromolecular network and fatigue properties of unfilled polychloroprene rubber. Polymer Degradation and Stability, 192, art. no. 109669 (sam) (hal)

  47. Le Goupil, F., Kallitsis, K., Tencé-Girault, S., Pouriamanesh, N., Brochon, C., Cloutet, E., . . . Hadziioannou, G. (2021). Enhanced electrocaloric response of vinylidene Fluoride–Based polymers via one-step molecular engineering. Advanced Functional Materials, 31(1) Article number 2007043 (sam) (hal)

  48. Loyer, C., Régnier, G., Duval, V., & Richaud, E. (2021). Multiscale study of poly(butylene terephthalate) hydrolysis. Polymer Degradation and Stability, 192 art. no. 109690 (sam) (hal)

  49. Lamnii, H., Nait Abdelaziz, M., Ayoub, G., Colin, X., & Maschke, U. (2021). Experimental investigation and modeling attempt on the effects of ultraviolet aging on the fatigue behavior of an LDPE semi-crystalline polymer. International Journal of Fatigue, 142  Article number 1059 (sam) (hal)
  50. Loreau, T; Champaney, V; Hascoet, N; Mourgue, P; Duval, JL; Chinesta, F .  (2021). Learning the Parametric Transfer Function of Unitary Operations for Real-Time Evaluation of Manufacturing Processes. APPLIED SCIENCES-BASEL. 11(11). Article Number 5146 . (sam) (hal)

  51. Lozay, Q; Beuguel, Q; Follain, N; Lebrun, L; Guinault, A; Miquelard-Garnier, G; Tence-Girault, S; Sollogoub, C; Dargent, E; Marais, S (2021) . Structural and Barrier Properties of Compatibilized PE/PA6 Multinanolayer Films. Membranes. 11 (2) . Article Number: 75 (sam) (hal)

  52. Mabrouk, W., Lafi, R., Fauvarque, J. F., Hafiane, A., & Sollogoub, C. (2021). New ion exchange membrane derived from sulfochlorated polyether sulfone for electrodialysis desalination of brackish water. Polymers for Advanced Technologies, 32(1), 304-314. (sam) (hal)

  53. Montés, N., Chinesta, F., Mora, M.C., Falcó, A., Hilario, L., Rosillo, N., Nadal, E. (2021). Real-time path planning based on harmonic functions under a proper generalized decomposition-based framework .  Sensors, 21 (12), art. no. 3943. (sam) (hal)

  54. Morin, L., Brenner, R., Derrien, K., & Dorhmi, K. (2021). Periodic smoothing splines for FFT-based solvers. Computer Methods in Applied Mechanics and Engineering, 373 Article number 113549 (sam) (hal)

  55. Morin, L., Braham, C., Tajdary, P., Seddik, R., & Gonzalez, G. (2021). Reconstruction of heterogeneous surface residual-stresses in metallic materials from X-ray diffraction measurements. Mechanics of Materials, 158, ,Article number 103882. (sam) (hal)

  56. Morin, L., & Acharya, A. (2021). Analysis of a model of field crack mechanics for brittle materials. Computer Methods in Applied Mechanics and Engineering, 386 art. no. 114061

  57. Mayi, Y. A., Dal, M., Peyre, P., Bellet, M., Metton, C., Moriconi, C., & Fabbro, R. (2021). Transient dynamics and stability of keyhole at threshold in laser powder bed fusion regime investigated by finite element modeling. Journal of Laser Applications, 33(1), Article number 012024 (sam) (hal)

  58. Mayi, Y. A., Dal, M., Peyre, P., Bellet, M., Metton, C., Moriconi, C., & Fabbro, R. (2021). Erratum. Transient dynamics and stability of keyhole at threshold in laser powder bed fusion regime investigated by finite element modeling. Journal of Laser Applications, 33(2), Article number 029902 (sam) (hal)

  59. Motaharinejad, V., Delnaud, L., Fouque, M., Lucas, A., Shirinbayan, M., Fitoussi, J., & Tcharkhtchi, A. (2021). Enhancement of adhesion between the polymeric liner and the metallic connector of high-pressure hydrogen storage tank. International Journal of Material Forming, 14(2), 249-260. (sam) (hal)

  60. Nikooharf, MH; Rezaei-Khamseh, M; Shirinbayan, M; Fitoussi, J; Tcharkhtchi, A.  (2021). Comparison of the physicochemical, rheological, and mechanical properties of core and surface of polypropylene composite (GF50-PP) plate fabricated by thermocompression process. POLYMER COMPOSITES. 42(7). 3293-3306. (sam) (hal)

  61. Nicolas, Clémence., Huang, Jing., Richaud, Emmanuel., Minne, Wendy., Drozdzak, Renata., Recher, Gilles., Fontaine, Laurent., Montembault, Véronique (2021). ROMP of novel hindered phenol-functionalized norbornenes and preliminary evaluation as stabilizing agents†. Polymer Degradation and Stability. 186. Article number 109522 (sam) (hal)

  62. Mussi, A., Gallet, J., Castelnau, O., & Cordier, P. (2021). Application of electron tomography of dislocations in beam-sensitive quartz to the determination of strain components. Tectonophysics, 803 , Article number 228754 (sam) (hal)

  63. Ors, T., Gouraud, F., Michel, V., Huger, M., Gey, N., Micha, J. -., Castelnau, O. ., Guinebretière, R. (2021). Huge local elastic strains in bulk nanostructured pure zirconia materials. Materials Science and Engineering A, 806 , Article number 140817 (sam) (hal)

  64. Pacquentin, W., Gouton, L., Caron, N., Brussieux, C., Foucault, M., Peyre, P., . . Favier, V. (2021). Laser surface melting of nickel-based alloy reduces nickel release in the primary cooling system of a nuclear power plant. Optics and Laser Technology, 144 , art. no. 107401. (sam) (hal)

  65. Pomès, B., Behin, P., Jordan, L., Legoff, S., Stoclet, G., Richaud, E., & Nguyen, J. -. (2021). Influence of polymerization pressure and post-cure treatment on conversion degree and viscoelastic properties of polymer infiltrated ceramic network. Journal of the Mechanical Behavior of Biomedical Materials, 115 , Article number 104286 (sam) (hal)

  66. Purushottam Raj Purohit, R., Richeton, T. , Berbenni, S., Germain, L. , Gey, N., Connolley,T. , Castelnau, O.  (2021). Estimating single-crystal elastic constants of polycrystalline β metastable titanium alloy: A Bayesian inference analysis based on high energy X-ray diffraction and micromechanical modeling, Acta Mater., 208,  Article number 116762 (sam) (hal)

  67. Rahbari, A., Rébillat, M., Mechbal, N., & Canu, S. (2021). Unsupervised damage clustering in complex aeronautical composite structures monitored by lamb waves: An inductive approach. Engineering Applications of Artificial Intelligence, 97 Article number 104099 (sam) (hal)

  68. Reille, Agathe; Champaney, Victor; Daim, Fatima; Tourbier, Yves; Hascoet, Nicolas; Gonzalez, David; Cueto, Elias; Duval, Jean Louis; Chinesta, Francisco. (2021) . Learning data-driven reduced elastic and inelastic models of spot-welded patches. MECHANICS & INDUSTRY. 22. Article number 32 .(sam) (hal)

  69. Roland, S., Moghaddam, M., Tencé-Girault, S., & Fayolle, B. (2021). Evolution of mechanical properties of aged poly(ether ketone ketone) explained by a microstructural approach. Polymer Degradation and Stability, 183 , Article number 109412 (sam) (hal)

  70. Rondepierre, A., Ünaldi, S., Rouchausse, Y., Videau, L., Fabbro, R., Casagrande, O., . . . Castelnau, O ., Berthe, L. (2021). Beam size dependency of a laser-induced plasma in confined regime: Shortening of the plasma release. influence on pressure and thermal loading. Optics and Laser Technology, 135, Article number 044061 (sam) (hal)

  71. Sapena-Bano, A., Chinesta, F., Puche-Panadero, R., Martinez-Roman, J., & Pineda-Sanchez, M. (2021). Model reduction based on sparse identification techniques for induction machines: Towards the real time and accuracy-guaranteed simulation of faulty induction machines. International Journal of Electrical Power and Energy Systems, 125 Article number 106417 (sam) (hal)

  72. Sancarlos, A., Cameron, M., Abel, A., Cueto, E., Duval, J. -., & Chinesta, F. (2021). From ROM of electrochemistry to AI-based battery digital and hybrid twin. Archives of Computational Methods in Engineering, 28(3), 979-1015. (sam) (hal)

  73. Sancarlos, A., Cueto, E., Chinesta, F., & Duval, J. -. (2021). A novel sparse reduced order formulation for modeling electromagnetic forces in electric motors. SN Applied Sciences, 3(3), Article number 355 (sam) (hal)

  74. Sancarlos, Abel; Ghnatios, Chady; Duval, Jean-Louis; Zerbib, Nicolas; Cueto, Elias; Chinesta, Francisco. Fast Computation of Multi-Parametric Electromagnetic Fields in Synchronous Machines by Using PGD-Based Fully Separated Representations. ENERGIES. 14 (5) . Article number 1454. (sam) (hal)

  75. Scius-Bertrand, M; Videau, L; Rondepierre, A; Lescoute, E; Rouchausse, Y; Kaufman, J; Rostohar, D; Brajer, J; Berthe, L (2021). Laser induced plasma characterization in direct and water confined regimes: new advances in experimental studies and numerical . JOURNAL OF PHYSICS D-APPLIED PHYSICS 54 (5),  Article Number 055204 (sam) (hal)

  76. Shirinbayan, M., Montazeri, A., Nouri Sedeh, M., Abbasnezhad, N., Fitoussi, J., & Tcharkhrtchi, A. (2021). Rotational molding of polyamide-12 nanocomposites: Modeling of the viscoelastic behavior. International Journal of Material Forming, 14(1), 143-152.(sam) (hal)

  77. Shirinbayan, M. (2021). Multiscale damage analysis of the tension-tension fatigue behavior of a low-density sheet molding compound. Journal of Applied Polymer Science, 138(4), Article number 49721. (sam) (hal)

  78. Shirinbayan, M., Beigi Rizi, H., Abbasnezhad, N., Tcharkhtchi, A., Fitoussi, J. Tension, compression, and shear behavior of advanced sheet molding compound (A-SMC): Multi-scale damage analysis and strain rate effect(2021) Composites Part B: Engineering, 225, art. no. 109287.

  79. Suárez, L., Castellano, J., Díaz, S., Tcharkhtchi, A., & Ortega, Z. (2021). Article are natural-based composites sustainable? Polymers, 13(14), art. no. 2326. (sam) (hal)

  80. Tence-Girault, S; Quibel, J; Cherri, A; Roland, S; Fayolle, B; Bizet, S; Iliopoulos, I. Quantitative Structural Study of Cold-Crystallized PEKK. ACS APPLIED POLYMER MATERIALS . 3 (4). 1795-1808. (sam) (hal)

  81. Tserpes, K., Papadopoulos, K., Unaldi, S., Berthe, L. Development of a numerical model to simulate laser-shock paint stripping on aluminum substrates(2021) Aerospace, 8 (9), art. no. 233

  82. Traore, S., Schneider, M., Koutiri, I., Coste, F., Fabbro, R., Charpentier, C., . . . Peyre, P. (2021). Influence of gas atmosphere (ar or he) on the laser powder bed fusion of a ni-based alloy. Journal of Materials Processing Technology, 288, Article number 116851 (sam) (hal)
  83. Toubhans, B., Lorong, P., Viprey, F., Fromentin, G., & Karaouni, H. (2021). A versatile approach, considering tool wear, to simulate undercut error when turning thin-walled workpieces. International Journal of Advanced Manufacturing Technology. 115 (5-6). 1919-1929 (sam) (hal)
  84. Unaldi, S., Papadopoulos, K., Rondepierre, A., Rouchausse, Y., Karanika, A., Deliane, F., . . . Berthe, L. (2021). Towards selective laser paint stripping using shock waves produced by laser-plasma interaction for aeronautical applications on AA 2024 based substrates. Optics and Laser Technology, 141, Article number 107095 . (sam) (hal)

  85. Uzan, Audrey; Chiron, Paul; Panthier, Frederic; Haddad, Mattieu; Berthe, Laurent; Traxer, Olivier; Doizi, Steeve . (2021) . Comparison of Holmium:YAG and Thulium Fiber Lasers on the Risk of Laser Fiber Fracture. JOURNAL OF CLINICAL MEDICINE. 10 (13).  Article Number 2960 . (sam) (hal)

  86. Vanaei, H. R., Shirinbayan, M., Costa, S. F., Duarte, F. M., Covas, J. A., Deligant, M., . . . Tcharkhtchi, A. (2021). Experimental study of PLA thermal behavior during fused filament fabrication. Journal of Applied Polymer Science, 138(4),  Article number 49747. (sam) (hal)

  87. Vanaei, H. R., Deligant, M., Shirinbayan, M., Raissi, K., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2021). A comparative in-process monitoring of temperature profile in fused filament fabrication. Polymer Engineering and Science, 61(1), 68-76. (sam) (hal)

  88. Vanaei, H. R., Shirinbayan, M., Vanaei, S., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2021). Multi-scale damage analysis and fatigue behavior of PLA manufactured by fused deposition modeling (FDM). Rapid Prototyping Journal, 27(2), 371-378.

  89. Ventimiglia, E., Pauchard, F., Gorgen, A.R.H., Panthier, F., Doizi, S., Traxer, O.  Berthe, L (2021). How do we assess the efficacy of Ho:YAG low-power laser lithotripsy for the treatment of upper tract urinary stones? Introducing the Joules/mm3 and laser activity concepts ) World Journal of Urology, 39–896. (sam) (hal)

  90. Visco , Annamaria ., Richaud ,Emmanuel., Scolaro, Cristina . (2021). Ageing of UHMWPE in presence of simulated synovial fluid . . Polymer Degradation and Stability. 189, Article number 109605. (sam) (hal)

  91. Xu, A., Roland, S., & Colin, X. (2021). Physico-chemical analysis of a silane-grafted polyethylene stabilised with an excess of irganox 1076®. proposal of a microstructural model. Polymer Degradation and Stability, 183 , Article number 109453 (sam) (hal)

  92. Xu, A., Roland, S., & Colin, X. (2021). Thermal ageing of a silane-crosslinked polyethylene stabilised with an excess of irganox 1076. Polymer Degradation and Stability, 189 , Article number 109597 (sam) (hal)

  93. Zhou, Y; Fillon, A; Jabir, H; Laille, D; Gloriant, T. (2021) Investigation of the superelastic behavior of a Ti-16Zr-13Nb-2Sn sputtered film by nanoindentation. SURFACE & COATINGS TECHNOLOGY. 405, Article number 126690 (sam) (hal)

 

Articles in press

  1. Benfriha, K., Ahmadifar, M., Shirinbayan, M., Tcharkhtchi, A. (2021).
    Effect of process parameters on thermal and mechanical properties of polymer-based composites using fused filament fabrication
     Polymer Composites,  Article in Press

  2. François, M., Han, S., Segonds, F., Dupuy, C., Rivette, M., Turpault, S., . . . Peyre, P. (2021). Electromagnetic performance of Ti6Al4V and AlSi7Mg0.6 waveguides with laser beam melting (LBM) produced and abrasive flow machining (AFM) finished internal surfaces. Journal of Electromagnetic Waves and Applications, Article in press

  3. Ghnatios, C., Rai, K. E., Hascoet, N., Pires, P. -., Duval, J. -., Lambarri, J., . . . Chinesta, F. (2021). Reduced order modeling of selective laser melting: From calibration to parametric part distortion. International Journal of Material Forming, Article in press
  4. Laribi, M. A., Tamboura, S., Fitoussi, J., Shirinbayan, M., Bi, R. T., Tcharkhtchi, A., & Dali, H. B. (2021). Modeling of short fiber reinforced polymer composites subjected to Multiblock loading. Applied Composite Materials, Article in press
  5. Luo, Y.-M., Chevalier, L., Monteiro, E., Utheza, F. (2020). Numerical simulation of self heating during stretch blow moulding of PET: viscohyperelastic modelling versus experimental results. International Journal of Material Forming,. Article in press.
  6. Morin, L., & Kondo, D. (2021). An interphase approach of size effects in ductile porous materials. International Journal of Fracture, Article in press
  7. Moya, B., Badías, A., Alfaro, I., Chinesta, F., & Cueto, E. (2020). Digital twins that learn and correct themselves. International Journal for Numerical Methods in Engineering, Article in press
  8. Pingulkar, H., Peixinho, J., Crumeyrolle, O. Liquid Transfer for Viscoelastic Solutions (2021) Langmuir, Article in press
  9. Tajdary, P., Morin, L., Braham, C., & Gonzalez, G. (2021). A reduced single-pattern model for the numerical simulation of multi-pattern metal forming. International Journal of Material Forming,

  10. Thézé, A., Guinault, A., Régnier, G., Richard, S., Macquaire, B. Fused filament fabrication process window for good interlayer bonding: Application to highly filled polymers in metallic powder (2021) Polymer Engineering and Science, Article in Press

  11. Zirak, N., Maadani , A.M. , Salahinejad, E.,   Abbasnezhad,  N., Shirinbayan, M. (2021) . Fabrication, drug delivery kinetics and cell viability assay of PLGA-coated vancomycin-loaded silicate porous microspheres.  Ceramics International. Article in press