E-mail : justin/*point*/dirrenberger/*arobase*/ensam/*point*/eu

Fonctions

• Maître de conférences HDR au Cnam
• Responsable de la formation d'ingénieur·e·s par alternance, spécialité Matériaux, au Cnam

Domaines de recherche

• Matériaux architecturés
• Physique et mécanique des milieux hétérogènes
• Modélisation et simulation numérique
• Procédés innovants

Publications

2024

• C. Vibert, A.-L. Dupont, J. Dirrenberger, R. Passas, D. Ricard, and B. Fayolle. Relationship between chemical and mechanical degradation of aged paper: fibre versus fibre-fibre bonds. Cellulose (IF=5.7), volume 31, pp.1855-1873, 2024 https://doi.org/10.1007/s10570-023-05683-x 

2023

• R. Azulay, C. Combescure, J. Dirrenberger. Instability-induced pattern generation in architectured materials—A review of methods. International Journal of Solids and Structures (IF=3.67), volume 274, 2023, 112240 https://doi.org/10.1016/j.ijsolstr.2023.112240
• M.V. Vellayappan, F. Duarte, C. Sollogoub, J. Dirrenberger, A. Guinault, J. E. Frith, H. C. Parkington, A. Molotnikov, and N. R. Cameron. Fabrication of architectured biomaterials by multilayer co-extrusion and additive manufacturing. Advanced Functional Materials (IF=19.92), 2023, 2301547 https://doi.org/10.1002/adfm.202301547 
• A. Le Duigou, M. Grabow, M. Castro, R. Toumi, M. Ueda, R. Matsuzaki, Y. Hirano, J. Dirrenberger, F. Scarpa, R. D’Elia, K. Labstie, and U. Lafont. Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer. Heliyon (IF=3.78), volume 9, 2023, e13581 https://doi.org/10.1016/j.heliyon.2023.e13581 
• Z. Wang, O. Bouaziz, J. Dirrenberger, and P. Lapouge. Corrugation reinforced architectured materials by direct laser hardening: a study of geometrically induced work hardening in steel. Steel Research International (IF=2.10), 2023, 2200695 https://doi.org/10.1002/srin.202200695 

2022

• Z. Wang, J. Dirrenberger, P. Lapouge, S. Dubent, H. Jabir, and V. Michel. Microstructure Evolution and Mechanical Properties of AISI 430 Ferritic Stainless Steel Strengthened Through Laser Carburization. ASME Journal of Engineering Materials and Technology (IF=1.63), volume 144(4), 2022, 041005 https://doi.org/10.1115/1.4055025 
• Z.Wang, J.Dirrenberger, P. Lapouge, and S.Dubent. Laser treatment of 430 ferritic stainless steel for enhanced mechanical properties. Materials Science and Engineering A (IF=5.23), volume 831, 2022, 142205 https://doi.org/10.1016/j.msea.2021.142205 

2021

• F. Albertini, J. Dirrenberger, C. Sollogoub, T. Maconachie, T. Leary, and A. Molotnikov. Experimental and computational analysis of the mechanical properties of composite auxetic lattice structures. Additive Manufacturing (IF=11.00), volume 47, 2021, 102351 https://doi.org/10.1016/j.addma.2021.102351 
• M. Menéndez-Muñiz, M. Chantin, C. R. Vintila, M. Fabritius, C. Martin, L. Calvo, L. Poudelet, J. Canou, M. Uhart, A. Papacharalampopoulos, P. Stavropoulos, N. O. E. Olsson, J. A. Tenorio, J. Alonso-Madrid, J. Dirrenberger, and I. Muñoz. Concrete hybrid manufacturing: A machine architecture. Procedia CIRP (IF=2.10), volume 97, 2021, pp. 51-58 https://doi.org/10.1016/j.procir.2020.07.003 
• Muñoz, I., Alonso-Madrid, J., Menéndez-Muñiz, M., Uhart, M., Canou, J., Martin, C., Fabritius, M., Calvo, L., Poudelet, L., Cardona, R., Lombois-Burger, H., Vlasopoulos, N., Bouyssou, C., Dirrenberger, J., Papacharalampopoulos, A., & Stavropoulos, P. (2021). Life cycle assessment of integrated additive–subtractive concrete 3D printing. The International Journal of Advanced Manufacturing Technology (IF=2.93), volume 112, pp.2149-2159 https://doi.org/10.1007/s00170-020-06487-0

2020

• K. Kuzmenko, N. Gaudillière*, A. Feraille, J. Dirrenberger, and O. Baverel. Assessing the Environmental Viability of 3D Concrete Printing Technology. In Impact: DesignWith All Senses, eds. C. Gengnagel, et al. Springer, 2020, pp. 517-528 https://doi.org/10.1007/978-3-030-29829-6_40 
• Viard, A. E., Dirrenberger, J., & Forest, S. (2020). Propagating material instabilities in planar architectured materials. International Journal of Solids and Structures, 202, 532-551 https://doi.org/10.1016/j.ijsolstr.2020.05.027
• Duballet, R., Mesnil, R., Ducoulombier, N., Carneau, P., Demont, L., Motamedi, M., Baverel, O., Caron, J.-F., & Dirrenberger, J. (2020). Free deposition printing for space truss structures. In DC 2020: Second RILEM International Conference on Concrete and Digital Fabrication, eds. F. P. Bos, S. S. Lucas, R. J.M.Wolfs, & T. A. M. Salet. Springer, pp. 873-882, ISBN: 9783030499167 https://doi.org/10.1007/978-3-030-49916-7_85
• Gaudillière, N., Dirrenberger, J., Duballet, R., Bouyssou, C., Mallet, A., Roux, Ph., & Zakeri, M. (2020). Industrialising Concrete 3D Printing: Three Case Studies. In Design Transactions, Rethinking Information Modelling for a New Material Age, eds. B. Sheil, M. Ramsgaard Thomsen, M. Tamke, and S. Hanna. UCL Press, pp. 158-165 https://doi.org/10.14324/111.9781787355026
• dell’Isola, F., Lekszycki, T., Spagnuolo, M., Peyre, P., Dupuy, C., Hild, F., Misra, A., Barchiesi, E., Turco, E., & Dirrenberger, J. (2020). Experimental Methods in Pantographic Structures. In Discrete and Continuum Models for Complex Metamaterials, eds. F. dell’Isola, and D. J. Steigmann. Cambridge University Press, pp. 263-297, ISBN: 9781107087736 https://doi.org/10.1017/9781316104262

2019

• Albertini, F., Dirrenberger, J., Molotnikov, A., & Sollogoub, C. (2019). Computational investigation of the effective mechanical behavior for 3D pre-buckled auxetic lattices. Journal of Applied Mechanics, 86(11), 111003. https://doi.org/10.1115/1.4044542
• Kuzmenko, K., Gaudillière, N., Feraille, A., Dirrenberger, J., & Baverel, O. (2019, September). Assessing the Environmental Viability of 3D Concrete Printing Technology. In Design Modelling Symposium Berlin (pp. 517-528). Springer, Cham. https://doi.org/10.1007/978-3-030-29829-6_40
• dell’Isola, F., Seppecher, P., Spagnuolo, M., Barchiesi, E., Hild, F., Lekszycki, T., Giorgio, I., Placidi, L., Andreaus, U., Cuomo, M., Eugster, S.R., Pfaff, A., Hoschke, K., Langkemper, R., Turco, E., Sarikaya, R., Misra, A., De Angelo, M., D’Annibale, F., Bouterf, A., Pinelli, X., Misra, A., Desmorat, B., Pawlikowski, M., Dupuy, C., Peyre, P., Laudato, M., Manzari, L., Göransson, P., Hesch, C., Hesch, S., Franciosi, P., Dirrenberger, J., Maurin, F., Vangelatos, Z., Grigoropoulos, C., Melissinaki, V., Farsari, M., Muller, W., Amali, B.E., Liebold, C., Ganzosch, G., Harrison, P., Drobnicki, R., Igumnov, L., Alzahrani, F., & Hayat, T. (2019). Advances in pantographic structures: design, manufacturing, models, experiments and image analyses. Continuum Mechanics and Thermodynamics, 31(4), 1231-1282 https://doi.org/10.1007/s00161-019-00806-x
• De Angelo, M., Spagnuolo, M., D’annibale, F., Pfaff, A., Hoschke, K., Misra, A., Dupuy, C., Peyre, P., Dirrenberger, J., & Pawlikowski, M. (2019). The macroscopic behavior of pantographic sheets depends mainly on their microstructure: experimental evidence and qualitative analysis of damage in metallic specimens. Continuum Mechanics and Thermodynamics, 31(4), 1181-1203 https://doi.org/10.1007/s00161-019-00757-3
• Wang, Z. P., Poh, L. H., Zhu, Y., Dirrenberger, J., & Forest, S. (2019). Systematic design of tetra-petals auxetic structures with stiffness constraint. Materials & Design, 170, 107669. https://doi.org/10.1016/j.matdes.2019.107669
• Lapouge, P., Dirrenberger, J., Coste, F., & Schneider, M. (2019). Laser heat treatment of martensitic steel and dual-phase steel with high martensite content. Materials Science and Engineering: A, 752, 128-135. https://doi.org/10.1016/j.msea.2019.03.016
• Ernault, E., Dirrenberger, J., Richaud, E., & Fayolle, B. (2019). Prediction of stress induced by heterogeneous oxidation: Case of epoxy/amine networks. Polymer degradation and stability, 162, 112-121. https://doi.org/10.1016/j.polymdegradstab.2019.02.019
• Duballet, R., Baverel, O., & Dirrenberger, J. (2019). Space Truss Masonry Walls With Robotic Mortar Extrusion. Structures, 18, 41-47. https://doi.org/10.1016/j.istruc.2018.11.003
• Yang, S., Dirrenberger, J., Monteiro, E., & Ranc, N. (2019). Representative volume element size determination for viscoplastic properties in polycrystalline materials. International Journal of Solids and Structures, 158, 210-219. https://doi.org/10.1016/j.ijsolstr.2018.09.011
• Dirrenberger, J., Forest, S., & Jeulin, D. (2019). Computational Homogenization of Architectured Materials. In Architectured Materials in Nature and Engineering (pp. 89-139). Springer, Cham. https://doi.org/10.1007/978-3-030-11942-3_4
• Gaudillière, N., Duballet, R., Bouyssou, C., Mallet, A., Roux, P., Zakeri, M., & Dirrenberger, J. (2019). Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete. In 3D Concrete Printing Technology (pp. 37-58). Butterworth-Heinemann. https://doi.org/10.1016/B978-0-12-815481-6.00003-8

2018

• Dirrenberger, J. (2018). Towards an integrated approach for the development of architectured materials (Habilitation dissertation, Sorbonne Université). https://hal.sorbonne-universite.fr/tel-02047005
• Gaudillière, N., Duballet, R., Bouyssou, C., Mallet, A., Roux, P., Zakeri, M., & Dirrenberger, J. (2018, September). Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars. In Robotic Fabrication in Architecture, Art and Design (pp. 459-472). Springer, Cham. https://doi.org/10.1007/978-3-319-92294-2_35
• Buswell, R. A., Leal de Silva, W., Jones, S. Z., & Dirrenberger, J. (2018). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research, 112, 37-49. https://doi.org/10.1016/j.cemconres.2018.05.006
• Dirrenberger, J. (2018). From Architectured Materials to Large-Scale Additive Manufacturing. In Robotic Building (pp. 79-96). Springer, Cham. https://doi.org/10.1007/978-3-319-70866-9_4
• Duballet, R., Baverel, O., & Dirrenberger, J. (2018). Design of Space Truss Based Insulating Walls for Robotic Fabrication in Concrete. In: De Rycke K. et al. (eds) Humanizing Digital Reality (pp. 453-461). Springer, Singapore. http://doi.org/10.1007/978-981-10-6611-5_39

2017

• Duballet, R., Baverel, O., & Dirrenberger, J. (2017). Classification of building systems for concrete 3D printing. Automation in Construction, 83, 247-258 http://doi.org/10.1016/j.autcon.2017.08.018
• Torabian, N., Favier, V., Dirrenberger, J., Adamski, F., Ziaei-Rad, S., & Ranc, N. (2017). Correlation of the high and very high cycle fatigue response of ferrite based steels with strain rate-temperature conditions. Acta Materialia, 134, 40-52 http://doi.org/10.1016/j.actamat.2017.05.064
• Wang, Z. P., Poh, L. H., Dirrenberger, J., Zhu, Y., & Forest, S. (2017). Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization. Computer Methods in Applied Mechanics and Engineering, 323, 250-271 http://doi.org/10.1016/j.cma.2017.05.013
• Torabian, N., Favier, V., Ziaei-Rad, S., Dirrenberger, J., Adamski, F., & Ranc, N. (2017). Calorimetric Studies and Self-Heating Measurements for a Dual-Phase Steel Under Ultrasonic Fatigue Loading. In Fatigue and Fracture Test Planning, Test Data Acquisitions, and Analysis, ASTM STP1598, Z. Wei, K. Nikbin, P. McKeighan, and G. Harlow, Eds., ASTM International, West Conshohocken, PA, pp. 81–93 http://dx.doi.org/10.1520/STP159820160053
• Dirrenberger, J. (2017). From Architectured Materials to the Development of Large-scale Additive Manufacturing. SPOOL, volume 4(1) http://dx.doi.org/10.7480/spool.2017.1.1910

2016

• Torabian, N., Favier, V., Ziaei-Rad, S., Adamski, F., Dirrenberger, J., & Ranc, N. (2016). Self-Heating Measurements for a Dual-Phase Steel under Ultrasonic Fatigue Loading for Stress Amplitudes below the Conventional Fatigue Limit. Procedia Structural Integrity, volume 2, pp. 1191-1198 http://dx.doi.org/10.1016/j.prostr.2016.06.152
• Torabian, N., Favier, V., Ziaei-Rad, S., Dirrenberger, J., Adamski, F., & Ranc, N. (2016). Thermal response of DP600 dual-phase steel under ultrasonic fatigue loading. Materials Science and Engineering: A, 677, 97-105 http://dx.doi.org/10.1016/j.msea.2016.09.025
• Bironeau, A., Dirrenberger, J., Sollogoub, C., Miquelard‐Garnier, G., & Roland, S. (2016). Evaluation of morphological representative sample sizes for nanolayered polymer blends. Journal of microscopy, 264(1), 48-58 http://dx.doi.org/10.1111/jmi.12415
• Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016). Large-scale 3D printing of ultra-high performance concrete–a new processing route for architects and builders. Materials & Design, 100, 102-109 http://dx.doi.org/10.1016/j.matdes.2016.03.097

2015

• Auffray, N., Dirrenberger, J., & Rosi, G. (2015). A complete description of bi-dimensional anisotropic strain-gradient elasticity. International Journal of Solids and Structures, 69, 195-206 http://dx.doi.org/10.1016/j.ijsolstr.2015.04.036
• Rosi, G., Auffray, N., & Dirrenberger, J. (2015, August). Wave propagation in the framework of strain gradient continua: the example of hexachiral materials. 22ème Congrès Français de Mécanique, Lyon, France, August 2015 http://hdl.handle.net/2042/57379

2014

• Gaudillière, N., Dirrenberger, J., Baverel, O., & Sollogoub, C. (2014). Additive Manufacturing for the Development of an Assembling System for Gridshells. In What’s the Matter? Materiality and Materialism at the Age of Computation, ed. M. Voyatzaki, pp. 195-210, ISBN: 978-960-89320-6-7
• Dirrenberger, J., Forest, S., & Jeulin, D. (2014). Towards gigantic RVE sizes for 3D stochastic fibrous networks. International Journal of Solids and Structures, 51(2), 359-376 http://dx.doi.org/10.1016/j.ijsolstr.2013.10.011

2013 and older

• Dirrenberger, J., Forest, S., & Jeulin, D. (2013). Effective elastic properties of auxetic microstructures: anisotropy and structural applications. International Journal of Mechanics and Materials in Design, volume 9(1), pp. 21-33 http://dx.doi.org/10.1007/s10999-012-9192-8
• Dirrenberger, J., Forest, S., & Jeulin, D. (2012). Elastoplasticity of auxetic materials. Computational Materials Science, volume 64, pp. 57-61 http://dx.doi.org/10.1016/j.commatsci.2012.03.036
• Dirrenberger, J., Forest, S., & Jeulin, D. (2012). Effective properties of auxetics made using selective laser melting. Matériaux & Techniques, volume 100, S1, pp. 172-173
• Dirrenberger, J., Forest, S., Jeulin, D., & Colin, C. (2011). Homogenization of periodic auxetic materials. Procedia Engineering, volume 10, pp. 1852-1857 http://dx.doi.org/10.1016/j.proeng.2011.04.307
• Lecampion, B., Vanzo, J., Ulm, F. J., Huet, B., Germay, C., Khalfallah, I., & Dirrenberger, J. (2011). Evolution of portland cement mechanical properties exposed to CO2-rich fluids: investigation at different scales. In MPPS 2011, symposium on mechanics and physics of porous solids: a tribute to Pr. Olivier Coussy http://hal.archives-ouvertes.fr/hal-00595113/

Projets de recherche en cours

• 2015 - 2020 : ANR JCJC SCOLASTIC (Systematic Computational Optimisation and Local Laser Processing for Steel-Based Architectured Materials)
• 2015 - 2020 : ANR ALMARIS (Architecturation Laser de MAtéRIaux Super-élastiques)
• 2019 - 2023 : ANR MAX-OASIS (Matériaux Architecturés eXotiques, Ondes, AniSotropie, InStabilités)

Projets de recherche passés

• Septembre 2014 - Décembre 2015 : Projet Synergie heSam Université - DEMOCRITE (Démonstrateur technologique pour une fabrication additive à grande échelle)
  CNAM, ENSAM, ENSCI-Les Ateliers, ENSA Paris-Malaquais, INRIA Sophia-Antipolis.
• Novembre 2014 - Novembre 2015 : Projet "Coup de pouce" F2M - APHORISME (Approche holiste de la chiralité dans les métamatériaux architecturés)
  Projet collaboratif entre le PIMM, MSME et le LMT-Cachan.

Téléchargements

• CV + liste de publications (pdf)
• Manuscrit de thèse : Effective properties of architectured materials (pdf/pastel)

Zébulon / Z-Set

• Notice d'utilisation du code Zébulon pour l'homogénéisation périodique + fichiers .inp et .geof (à renommer en .zip)