1. Asgarpour, M., Bakir, F., Khelladi, S., Khavandi, A., Tcharkhtchi, A. (2011). Characterization and modeling of sintering of polymer particles. Journal of Applied Polymer Science, 119(5), 2784-2792. (sam) (hal)
  2. Amar, H., Vignal, V., Krawiec, H., Josse, C., Peyre, P., da Silva, S. N., Dick, L.F (2011). Influence of the microstructure and laser shock processing (LSP) on the corrosion behaviour of the AA2050-T8 aluminium alloy. Corrosion Science, 53(10), 3215-3221. (sam) (hal)
  3. Baczmanski, A., Le Joncour, L., Panicaud, B., Francois, M., Braham, C., Paradowska, A. M, Wronski, S, Amara, S, Chiron, R. (2011). Neutron time-of-flight diffraction used to study aged duplex stainless steel at small and large deformation until sample fracture. Journal of Applied Crystallography, 44(5), 966-982.(sam) (hal)
  4. Benkhenafou, F., Chemingui, M., Fayolle, B., Verdu, J., Ferouani, A. K., Lefebvre, J. M. (2011). Fracture behaviour of a polypropylene film. Materials and Design, 32(3), 1515-1519. (sam) (hal
  5. Berthe, L., Arrigoni, M., Boustie, M., Cuq-Lelandais, J. P., Broussillou, C., Fabre, G., Jeandin, M, Guipont, V, Nivard, M. (2011). State-of-the-art laser adhesion test (LASAT). Nondestructive Testing and Evaluation, 26(3-4), 303-317.   (sam) (hal)
  6. Berthe, L., Bezaeva, N. S., Gattaceca, J., Boustie, M., De Rességuier, T., Rochette, P. (2011). Behavior of basalt under laser-induced shock-wave application to the planetary hypervelocity impact effect. Journal of Laser Applications, 23(1), n°012006.   (sam) (hal)
  7. Breton, F., Bennetau, B., Lidereau, R., Thomas, L., Régnier, G., Ehrhart, J., Tauc, P., Tran, P.L. (2011). A mesofluidic multiplex immunosensor for detection of circulating cytokeratin-positive cells in the blood of breast cancer patients. Biomedical Microdevices, 13(1), 1-9. (sam) (hal)
  8. Colin, X., Monchy-Leroy, C., Verdu, J. (2011). Effect of gamma irradiation on tensile properties of low molecular weight polyethylene samples. Radiation Physics and Chemistry, 80(8), 895-901. (sam) (hal)
  9. Colin, X., Verdu, J., Rabaud, B. (2011). Stabilizer thickness profiles in polyethylene pipes transporting drinking water disinfected by bleach. Polymer Engineering and Science, 51(8), 1541-1549.  (sam) (hal)  
  10. Courgneau, C., Domenek, S., Guinault, A., Avérous, L., Ducruet, V. (2011). Analysis of the structure-properties relationships of different multiphase systems based on plasticized poly(lactic acid). Journal of Polymers and the Environment, 19(2), 362-371. (sam) (hal)
  11. Devilliers, C., Fayolle, B., Laiarinandrasana, L., Oberti, S., Gaudichet-Maurin, E. (2011). Kinetics of chlorine-induced polyethylene degradation in water pipes. Polymer Degradation and Stability, 96(7), 1361-1368.  (sam) (hal)   
  12. Diani, J., Frédy, C., Gilormini, P., Merckel, Y., Régnier, G., Rousseau, I. (2011). A torsion test for the study of the large deformation recovery of shape memory polymers. Polymer Testing, 30(3), 335-341.  (sam) (hal)
  13. Djouani, F., Richaud, E., Fayolle, B., Verdu, J. (2011). Modelling of thermal oxidation of phosphite stabilized polyethylene. Polymer Degradation and Stability, 96(7), 1349-1360.  (sam) (hal) 
  14. El Mazry, C., Correc, O.  Colin, X, (2011). Reversible hydrolysis of polyamide 6.6 - Kinetic modeling of embrittlement, European journal of water quality, 42, 51-69. (sam) (hal)
  15. Faurie, D., Renault, P. ., Le Bourhis, E., Chauveau, T., Castelnau, O., Goudeau, P. (2011). X-ray strain analysis of {111} fiber-textured thin films independent of grain-interaction models. Journal of Applied Crystallography, 44(2), 409-413.  (sam) (hal) 
  16. Favier, V., Atkinson, H. V. (2011). Micromechanical modelling of the elastic-viscoplastic response of metallic alloys under rapid compression in the semi-solid state. Acta Materialia, 59(3), 1271-1280.  (sam) (hal) 
  17. Fayolle, B., Verdu, J. (2011). Radiation aging and chemi-crystallization processes in polyoxymethylene. European Polymer Journal, 47(11), 2145-2151.  (sam) (hal
  18. Ghanem, F., Fredj, N. B., Sidhom, H., Braham, C. (2011). Effects of finishing processes on the fatigue life improvements of electro-machined surfaces of tool steel. International Journal of Advanced Manufacturing Technology, 52(5-8), 583-595.  (sam) (hal
  19. Gaudichet-Maurin, E., Devilliers, C., Fernandes, P., Oberti, S., Lucatelli, J., Cambrezy, M., et al. (2011). Chemical interaction of polyethylene pipes with chlorine in drinking water distribution systems. [Interactions chimiques des tubes en polyéthylène avec le chlore en eau potable] Techniques - Sciences - Methodes, (9), 28-38. (sam) (hal)
  20. Hirano, K., Fabbro, R. (2011). Experimental investigation of hydrodynamics of melt layer during laser cutting of steel. Journal of Physics D: Applied Physics, 44(10), n°105502.  (sam) (hal)
  21. Hirano, K., Fabbro, R., Muller, M. (2011). Experimental determination of temperature threshold for melt surface deformation during laser interaction on iron at atmospheric pressure. Journal of Physics D: Applied Physics, 44(43), n°435402.  (sam) (hal)
  22. Illoul, L., Lorong, P. (2011). On some aspects of the CNEM implementation in 3D in order to simulate high speed machining or shearing. Computers and Structures, 89(11-12), 940-98. (sam) (hal)
  23. Krawiec, H. Vignal, V., Amar, H., Peyre, P., Local electrochemical impedance spectroscopy study of the influence of ageing in air and laser-shock processing on the micro-electrochemical behaviour of AA2050-T8 aluminium alloy Electrochemica Acta, 56(26) (2011), 9581-9587 (sam) (hal)
  24. Laiarinandrasana, L., Devilliers, C., Oberti, S., Gaudichet, E., Fayolle, B., Lucatelli, J. M. (2011). Ring tests on high density polyethylene: Full investigation assisted by finite element modeling. International Journal of Pressure Vessels and Piping, 88(1), 1-10. (sam) (hal)
  25. Le Bourhis, E., Faurie, D., Renault, P. O., Geandier, G., Thiaudière, D., Castelnau, O., et al. (2011). X-ray elastic response of metallic thin film supported by polyimide substrates. Journal of Strain Analysis for Engineering Design, 46(7), 639-649 (sam) (hal)
  26. Le Guen, E., Carin, M., Fabbro, R., Coste, F., Le Masson, P. (2011). 3D heat transfer model of hybrid laser nd:Yag-MAG welding of S355 steel and experimental validation. International Journal of Heat and Mass Transfer, 54(7-8), 1313-1322. (sam) (hal)
  27. Le Guen, E., Fabbro, R., Carin, M., Coste, F., Le Masson, P. (2011). Analysis of hybrid nd:Yag laser-MAG arc welding processes. Optics and Laser Technology, 43(7), 1155-1166. (sam) (hal)    
  28. Liu, D., Hui, F., Ledion, J., Li, F. (2011). Effectiveness of copper and zincions in preventing scaling of drinking water. Environmental Technology, 32(6), 609-616.(sam) (hal)
  29. Liu, D., Hui, F., Ledion, J., Li, F. (2011). Study of the scaling formation mechanism in rcycling water. Environmental Technology, 32(9), 1017-1030 (sam) (hal)
  30. Liu, D., Zhang, B., Li, F., Hui, F., Lédion, J. (2011). Effects of temperature and dissolved C2 on the scaling of water in the presence of copper and zinc. Ionics, 17(8), 751-757.(sam) (hal)
  31. Liang, G. G., Cook, W. D., Tcharkhtchi, A., Sautereau, H. (2011). Epoxy as a reactive plasticizer for improving polycarbonate processibility. European Polymer Journal, 47(8), 1578-1588.   (sam) (hal)
  32. Mabrouk, W., Ogier, L., Matoussi, F., Sollogoub, C., Vidal, S., Dachraoui, M., Fauvarque, J.F. (2011). Preparation of new proton exchange membranes using sulfonated poly(ether sulfone) modified by octylamine (SPESOS). Materials Chemistry and Physics, 128(3), 456-463.  (sam) (hal) 
  33. Merckel, Y., Diani, J., Brieu, M., Berghezan, D. (2011). Experimental characterization and modelling of the cyclic softening of carbon-black filled rubbers. Materials Science and Engineering A, 528(29-30), 8651-8659. (sam) (hal)    
  34. Merckel, Y., Diani, J., Brieu, M., Gilormini, P., Caillard, J. (2011). Characterization of the mullins effect of carbon-black filled rubbers. Rubber Chemistry and Technology, 84(3), 402-414.    (sam) (hal)
  35. Merckel, Y., Diani, J., Roux, S., Brieu, M. (2011). A simple framework for full-network hyperelasticity and anisotropic damage. Journal of the Mechanics and Physics of Solids, 59(1), 75-88.  (sam) (hal
  36. Montazeri, A., Khavandi, A., Javadpour, J., Tcharkhtchi, A. (2011). Viscoelastic properties of multi walled carbon nanotube/epoxy composites at the different nanotube content. Journal of Nano Research, 13, 33-39.  (sam) (hal)
  37. Montazeri, N., Farzaneh, S. (2011). Thermo-mechanical properties of multi-walled carbon nanotube (mwcnt)/epoxy composites. International Journal of Polymer Analysis and Characterization, 16(3), 199-21(sam) (hal)
  38. Montazeri, A., Khavandi, A., Javadpour, J., Tcharkhtchi, A., (2011). An investigation on the effect of sonication time and dispersing medium on the mechanical properties of MWCNT/epoxy nanocomposites, Advanced Materials Research 264-265, 1954-1959 (sam) (hal)
  39. Nait-Ali, L. K., Bergeret, A., Colin, X. (2011). A kinetic model for predicting PET macromolecular changes during its mechanical recycling. [Un modèle cinétique pour prédire les modifications de structure macromoléculaire du PET pendant son recyclage mécanique] Matériaux et Techniques, 99(4), 373-390.  (sam) (hal)   
  40. Nait-Ali, L. K., Colin, X., Bergeret, A. (2011). Kinetic analysis and modelling of PET macromolecular changes during its mechanical recycling by extrusion. Polymer Degradation and Stability, 96(2), 236-246. (sam) (hal)
  41. Navarro, R., Audouin, L., Verdu, J. (2011). Reactions of antioxidants with molecular oxygen. part I. 2,2′-methylene-bis(4-methyl-6-tert-butylphenol) in silicone matrix. Polymer Degradation and Stability, 96(2), 220-225.   (sam) (hal)
  42. Navarro, R., Audouin, L., Verdu, J. (2011). Reactions of antioxidants with molecular oxygen. part II. isooctyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate in silicone matrix. Polymer Degradation and Stability, 96(5), 965-973.  (sam) (hal)   
  43. Navarro, R., Audouin, L., Verdu, J. (2011). Reactions of antioxidants with molecular oxygen. part III: Influence of phenolic stabiliser structures on their oxidation in an inert matrix. Polymer Degradation and Stability, 96(7), 1389-1396.  (sam) (hal)   
  44. Nistor, M., Mandache, N. B., Perrière, J., Hebert, C., Gherendi, F., Seiler, W. (2011). Growth, structural and electrical properties of polar ZnO thin films on MgO (100) substrates. Thin Solid Films, 519(11), 3959-3964. (sam) (hal)
  45. Perrière, J., Hebert, C., Petitmangin, A., Portier, X., Seiler, W., Nistor, M. (2011). Formation of metallic nanoclusters in oxygen deficient indium tin oxide films. Journal of Applied Physics, 109(12), n° 123704. (sam) (hal)
  46. Peyre, P., Hfaiedh, N., Song, H., Ji, V., Vignal, V., Seiler, W., et al. (2011). Laser shock processing with two different laser sources on 2050-T8 aluminum alloy. International Journal of Structural Integrity, 2(1), 87-100.  (sam) (hal)
  47. Ranc, N., Palin-Luc, T., Paris, P. C. (2011). Thermal effect of plastic dissipation at the crack tip on the stress intensity factor under cyclic loading. Engineering Fracture Mechanics, 78(6), 961-972.   (sam) (hal)
  48. Richaud, E., Colin, X., Monchy-Leroy, C., Audouin, L., Verdu, J. (2011). Diffusion-controlled radiochemical oxidation of bisphenol A polysulfone. Polymer International, 60(3), 371-381.  (sam) (hal)   
  49. Richaud, E., Fayolle, B., Verdu, J. (2011). Polypropylene stabilization by hindered phenols - kinetic aspects. Polymer Degradation and Stability, 96(1), 1-11. (sam) (hal)
  50. Riquet, A. M., Rohman, G., Guinault, A., Demilly, M. (2011). Surface modification of polypropylene by radiation grafting of hydrophilic monomers: Physicochemical properties. Surface Egineering, 27(4), 234-241.    (sam) (hal)
  51. Rouleau, B., Peyre, P., Breuils, J., Pelletier, H., Baudin, T., Brisset, F. (2011). Characterization at a local scale of a laser-shock peened aluminum alloy surface. Applied Surface Science, 257(16), 7195-7203. (sam) (hal)
  52. Sollogoub, C., Montmitonnet, P., Demay, Y., Agassant, J. F., Deparis, P. (2011). Origin of the bubble defect in the extrusion coating process. Polymer Engineering and Science, 51(2), 347-357.  (sam) (hal)   
  53. Teyssedre, H., Roux, S., Régnier, G., Tracz, A. (2011). Filtering out slow-scan drifts in atomic force microscopy images. Journal of Strain Analysis for Engineering Design, 46(5), 361-367. (sam) (hal)    
  54. Wawszczak, R., Baczmański, A., Braham, C., Seiler, W., Wróbel, M., Wierzbanowski, K., Lodini, A, (2011). Residual stress field in steel samples during plastic deformation and recovery processes. Philosophical Magazine, 91(17), 2263-2290.(sam) (hal)