1. Aid, S., Eddhahak, A., Ortega, Z., Froelich, D., & Tcharkhtchi, A. (2017). Experimental study of the miscibility of ABS/PC polymer blends and investigation of the processing effect. Journal of Applied Polymer Science, 134(25). (sam) (hal)
  2. Aid, S., Eddhahak, A., Ortega, Z., Froelich, D., & Tcharkhtchi, A. (2017). Predictive coalescence modeling of particles from different polymers: Application to PVDF and PMMA pair. Journal of Materials Science, 52(19). (sam) (hal)
  3. Aubry, P., Blanc, C., Demirci, I., Dal, M., Malot, T., & Maskrot, H. (2017). Laser cladding and wear testing of nickel base hardfacing materials: Influence of process parameters. Journal of Laser Applications, 29(2). (sam) (hal)
  4. Bardy, S., Aubert, B., Berthe, L., Combis, P., Hébert, D., Lescoute, E., Videau, L. (2017). Numerical study of laser ablation on aluminum for shock-wave applications: Development of a suitable model by comparison with recent experiments. Optical Engineering, 56(1), N° 011014 (sam) (hal)
  5. Bardy, S., Ducousso, M., Bergara, T., Berthe, L., Videau, L., Jenson, F., & Cuvillier, N. (2017). Non-destructive evaluation of the mechanical strength of a TA6V4/composite bond using LASAT. JEC Composites Magazine, 54(116), 58-62.
  6. Ben Rhouma, A., Amadou, T., Sidhom, H., & Braham, C. (2017). Correlation between microstructure and intergranular corrosion behavior of low delta-ferrite content AISI 316L aged in the range 550–700 °C. Journal of Alloys and Compounds, 708, 871-886. (sam) (hal)
  7. Berthe, L., Courapied, D., El Karnighi, S., Peyre, P., Gorny, C., & Rouchausse, Y. (2017). Study of laser interaction in water flow confinement at high repetition rate. Journal of Laser Applications, 29(4) (sam) (hal)
  8. Bironeau, A., Salez, T., Miquelard-Garnier, G., & Sollogoub, C. (2017). Existence of a critical layer thickness in PS/PMMA nanolayered films. Macromolecules, 50(10), 4064-4073. (sam) (hal)
  9. Blackman, D. K., Boyce, D. E., Castelnau, O., Dawson, P. R., & Laske, G. (2017). Effects of crystal preferred orientation on upper-mantle flow near plate boundaries: Rheologic feedbacks and seismic anisotropy. Geophysical Journal International, 210(3), 1481-1493. (sam) (hal)
  10. Casalino, G., Guglielmi, P., Lorusso, V. D., Mortello, M., Peyre, P., & Sorgente, D. (2017). Laser offset welding of AZ31B magnesium alloy to 316 stainless steel. Journal of Materials Processing Technology, 242, 49-59 (sam) (hal)
  11. Choupin, T., Fayolle, B., Régnier, G., Paris, C., Cinquin, J., & Brulé, B. (2017). Isothermal crystallization kinetic modeling of poly(etherketoneketone) (PEKK) copolymer. Polymer (United Kingdom), 111, 73-82. (sam) (hal)
  12. CHERIF, Rabeb., EDDHAHAK, Anissa., GABET, Thomas., NEJI, Jamel. (2017). Prédiction des propriétés viscoélastiques des enrobés bitumineux Approches micromécaniques et expérimentales, Revue des composites et matériaux avancés, 27, 165-176. (sam) (hal)
  13. Courvoisier, E., Bicaba, Y., & Colin, X. (2017). Analytical study of the thermal degradation of poly(ether ether ketone). [Analyse de la dégradation thermique du Poly(éther éther cétone)] Materiaux Et Techniques, 105(4) (sam) (hal)
  14. Dal, M., & Peyre, P. (2017). Multiphysics simulation and experimental investigation of aluminum wettability on a titanium substrate for laser welding-brazing process. Metals, 7(6). (sam) (hal)
  15. Defauchy, V., Le Gac, P. Y., Guinault, A., Verdu, J., Recher, G., Drozdzak, R., & Richaud, E. (2017). Kinetic analysis of polydicyclopentadiene oxidation. Polymer Degradation and Stability, 142, 169-177. (sam)
  16. Diani, J., & Gilormini, P. (2017). Molecular mobility with respect to accessible volume in monte carlo lattice model for polymers. Physica A: Statistical Mechanics and its Applications, 468, 825-831. (sam) (hal)
  17. Diani, J., & Gilormini, P. (2017). On necessary precautions when measuring solid polymer linear viscoelasticity with dynamic analysis in torsion. Polymer Testing, 63, 275-280. (sam) (hal)
  18. Duballet, R., Baverel, O., & Dirrenberger, J. (2017). Classification of building systems for concrete 3D printing. Automation in Construction, 83, 247-258. (sam) (hal)
  19. El-Rabii, H., Kazakov, K. A., & Muller, M. (2017). Experimental and theoretical study of iron and mild steel combustion in oxygen flows. Physics of Fluids, 29(3). (sam) (hal)
  20. Ernault, E., Richaud, E., & Fayolle, B. (2017). Thermal-oxidation of epoxy/amine followed by glass transition temperature changes. Polymer Degradation and Stability, 138, 82-90. (sam) (hal)
  21. Ernault, E., Richaud, E., & Fayolle, B. (2017). Origin of epoxies embrittlement during oxidative ageing. Polymer Testing, 63, 448-454. (sam) (hal)
  22. ESSID, Nessrine., EDDHAHAK, Anissa., NEJI, Jamel. 2017). Étude expérimentale et numérique pour la caractérisation thermique des bétons à changement de phase (BCP). Revue des composites et matériaux avancés, 27, 97-110. (sam) (hal)
  23. Fernandes Nassar, S., Guinault, A., Delpouve, N., Divry, V., Ducruet, V., Sollogoub, C., & Domenek, S. (2017). Multi-scale analysis of the impact of polylactide morphology on gas barrier properties. Polymer (United Kingdom), 108, 163-172. (sam) (hal)
  24. Genari, H. F. G., Mechbal, N., Coffignal, G., & Nóbrega, E. G. O. (2017). A reconfigurable damage-tolerant controller based on a modal double-loop framework. Mechanical Systems and Signal Processing, 88, 334-353.  (sam) (hal)
  25. Genari, H. F. G., Mechbal, N., Coffignal, G., & Nóbrega, E. G. O. (2017). Damage-tolerant active control using a modal H∞-norm-based methodology. Control Engineering Practice, 60, 76-86. (sam) (hal)
  26. Genari, H. F. G., Mechbal, N., Coffignal, G., & Nóbrega, E. G. O. (2017). A modal H∞-norm-based performance requirement for damage-tolerant active controller design. Journal of Sound and Vibration, 394, 15-30. (sam) (hal)
  27. Gerasimenko, A., Guskov, M., Gouskov, A., Lorong, P., & Shokhin, A. (2017). Analytical modeling of a thin-walled cylindrical workpiece during the turning process. stability analysis of a cutting process. Journal of Vibroengineering, 19(8), 5825-5841. (sam) (hal)
  28. Ghrib, M., Berthe, L., Mechbal, N., Rébillat, M., Guskov, M., Ecault, R., & Bedreddine, N. (2017). Generation of controlled delaminations in composites using symmetrical laser shock configuration. Composite Structures, 171, 286-297 (sam) (hal)
  29. Ghrib, M., Rébillat, M., Mechbal, N., & des Roches, G. V. (2017). Automatic damage quantification using signal based and nonlinear model based damage sensitive features. IFAC-PapersOnLine, 50(1), 7981-7986. (sam) (hal)
  30. Gilormini, P., & Diani, J. (2017). Some features of the PPR cohesive-zone model combined with a linear unloading/reloading relationship. Engineering Fracture Mechanics, 173, 32-40. (sam) (hal)
  31. Gilormini, P., Richaud, E., & Verdu, J. (2017). Radiochemical “degelation” of polymethyl methacrylate networks. Polymer (United Kingdom), 111, 130-136. (sam) (hal)
  32. Gilormini, P., Toulemonde, P. -., Diani, J., & Gardere, A. (2017). Stress-strain response and volume change of a highly filled rubbery composite: Experimental measurements and numerical simulations. Mechanics of Materials, 111, 57-65. (sam) (hal)
  33. Girardot, J., Lorong, P., Illoul, L., Ranc, N., Schneider, M., & Favier, V. (2017). Modeling laser drilling in percussion regime using constraint natural element method. International Journal of Material Forming, 10(2), 205-219. (sam) (hal)
  34. Gunenthiram, V., Peyre, P., Schneider, M., Dal, M., Coste, F., & Fabbro, R. (2017). Analysis of laser-melt pool-powder bed interaction during the selective laser melting of a stainless steel. Journal of Laser Applications, 29(2). (sam) (hal)
  35. Gouskov, A. M., Guskov, M., Lorong, P., & Panovko, G. (2017). Influence of flank face on the condition of chatter self-excitation during turning. International Journal of Mchining and Machinability of Materials, 19(1), 17-40. (sam) (hal)
  36. Gu, T., Castelnau, O., Forest, S., Hervé-Luanco, E., Lecouturier, F., Proudhon, H., & Thilly, L. (2017). Multiscale modeling of the elastic behavior of architectured and nanostructured Cu–Nb composite wires. International Journal of Solids and Structures, 121, 148-162. (sam) (hal)
  37. Gu, T., Medy, J. -., Volpi, F., Castelnau, O., Forest, S., Hervé-Luanco, E., Thilly, L. (2017). Multiscale modeling of the anisotropic electrical conductivity of architectured and nanostructured cu-nb composite wires and experimental comparison. Acta Materialia, 141, 131-141. (sam) (hal)
  38. Haddad, M., Emiliani, E., Rouchausse, Y., Coste, F., Berthe, L., Doizi, S., Butticé, S., Somani, B. Traxer, O. (2017). Impact of laser fiber tip cleavage on power output for ureteroscopy and stone treatment. World Journal of Urology, , 35(11), 1765-1770. (sam) (hal)
  39. Haddad, M., Emiliani, E., Rouchausse, Y., Coste, F., Doizi, S., Berthe, L., Traxer, O. (2017). Impact of the curve diameter and laser settings on laser fiber fracture. Journal of Endourology, 31(9), 918-921.
  40. Hallberg, H., Adamski, F., Baïz, S., & Castelnau, O. (2017). Microstructure and property modifications of cold rolled IF steel by local laser annealing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48(10), 4786-4802. (sam) (hal)
  41. Hamrani, A., Belaidi, I., Monteiro, E., & Lorong, P. (2017). On the factors affecting the accuracy and robustness of smoothed-radial point interpolation method. Advances in Applied Mathematics and Mechanics, 9(1), 43-72. (sam) (hal)
  42. Hébert, D., Seisson, G., Rullier, J. -., Bertron, I., Hallo, L., Chevalier, J. -., Berthe, L. (2017). Hypervelocity impacts into porous graphite: Experiments and simulations. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 375(2085) (sam) (hal)
  43. Kalentics, N.,  Boillat, E., Peyre,P., Ćirić-Kostić,S., Bogojević,N.,  Roland E. , Logé R. (2017).Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening. Additive Manufacturing, 16, 90-97. (sam) (hal)
  44. Kalentics, N., Boillat, E.,Peyre,P., Gorny, C.,  Kenel, C., Leinenbach, C., Jhabvala, J., Logé R. (2017). 3D Laser Shock Peening - a new method for the 3D control of residual stresses in Selective Laser Melting. Materials & Design, 130, 350.356. (sam)
  45. Kanjer, A., Lavisse, L., Optasanu, V., Berger, P., Gorny, C., Peyre, P., Marco de Lucas, M. C. (2017). Effect of laser shock peening on the high temperature oxidation resistance of titanium. Surface and Coatings Technology, 326, 146-155. (sam) (hal)
  46. Kanjer, A., Optasanu, V., Lavisse, L., Marco de Lucas, M. C., Dejardin, S., François, M., Berger, P. Peyre, P., Gorny , C., Montesin, T. (2017). Influence of mechanical surface treatment on high-temperature oxidation of pure titanium. Oxidation of Metals, 88(3-4), 383-395. (sam) (hal)
  47. Koutiri, I., Bellet, D., Morel, F. (2017). The effect of mean stress and stress biaxiality in high-cycle fatigue. Fatigue & Fracture of Engineering Materials & Structures, 1–16. (sam) (hal)
  48. Lafourcade, P., Denoual, C., & Maillet, J. -. (2017). Dislocation core structure at finite temperature inferred by molecular dynamics simulations for 1,3,5-triamino-2,4,6-trinitrobenzene single crystal. Journal of Physical Chemistry C, 121(13), 7442-7449. (sam) (hal)
  49. Lizé, E., Rébillat, M., Mechbal, N., & Bolzmacher, C. (2017). Estimation of the temperature field on a composite fan cowl using the static capacity of surface-mounted piezoceramic transducers. IFAC-PapersOnLine, 50(1), 11689-11694. (sam) (hal)
  50. Lubineau, G., Sulaimani, A., El Yagoubi, J., Mulle, M., & Verdu, J. (2017). Hysteresis in the relation between moisture uptake and electrical conductivity in neat epoxy. Polymer Degradation and Stability, 141, 54-57. (sam) (hal)
  51. Maimaitiyili, T., Bjerken, C., Steuwer, A., Wang, Z., Daniels, J., Andrieux, J., Blomqvist, J., Zanellato, O. In situ observation of γ-ZrH formation by X-ray diffraction (2017). Journal of Alloys and Compounds, 695, 3124-3130. (sam) (hal)
  52. Maimaitiyili, T., Steuwer, A., Bjerkén, C., Blomqvist, J., Hoelzel, M., Ion, J.C., Zanellato, O. The preparation of Zr-deuteride and phase stability studies of the Zr-D system (2017). Journal of Nuclear Materials, 485, 243-252. (sam)
  53. Marciszko, M., Baczmański, A., Braham, C., Wróbel, M., Wroński, S., & Cios, G. (2017). Stress measurements by multi-reflection grazing-incidence X-ray diffraction method (MGIXD) using different radiation wavelengths and different incident angles. Acta Materialia, 123, 157-166. (sam) (hal)
  54. Martin, G., Balmes, E., & Chancelier, T. (2017). Characterization of identification errors and uses in localization of poor modal correlation. Mechanical Systems and Signal Processing, 88, 62-80. (sam)
  55. Meftah, H., Tamboura, S., Fitoussi, J., BenDaly, H., & Tcharkhtchi, A. (2017). Characterization of a new fully recycled carbon fiber reinforced composite subjected to high strain rate tension. Applied Composite Materials, , 1-20; (sam) (hal)
  56. Messin, T., Follain, N., Guinault, A., Miquelard-Garnier, G., Sollogoub, C., Delpouve, N., Marais, S. (2017). Confinement effect in PC/MXD6 multilayer films: Impact of the microlayered structure on water and gas barrier properties. Journal of Membrane Science, 525, 135-145. (sam) (hal)
  57. Messin, T., Follain, N., Guinault, A., Sollogoub, C., Gaucher, V., Delpouve, N., & Marais, S. (2017). Structure and barrier properties of multinanolayered biodegradable PLA/PBSA films: Confinement effect via forced assembly coextrusion. ACS Applied Materials and Interfaces, 9(34), 29101-29112. (sam) (hal)
  58. Montana, B. J. S., Roland, S., Miquelard Garnier, G., & Richaud, E. (2017). Effect of thermal oxidation on the self-assembly of triblock terpolymers. Polymer Degradation and Stability, 146, 229-239. (sam) (hal)
  59. Morin, L., Michel, J. -., & Leblond, J. -. (2017). A gurson-type layer model for ductile porous solids with isotropic and kinematic hardening. International Journal of Solids and Structures, 118-119, 167-178. (sam) (hal)
  60. Morin, L., Leblond, J. -., Mohr, D., & Kondo, D. (2017). Prediction of shear-dominated ductile fracture in a butterfly specimen using a model of plastic porous solids including void shape effects. European Journal of Mechanics, A/Solids, 61, 433-442. (sam) (hal)
  61. Mikdam, A., Colin, X., Minard, G., Billon, N., & Maurin, R. (2017). A kinetic model for predicting the oxidative degradation of additive free polyethylene in bleach desinfected water. Polymer Degradation and Stability, 146, 78-94. (sam) (hal)
  62. Örs, T., Gouraud, F., Guinebretière, R., Huger, M., Michel, V., & Castelnau, O. (2017). Neutron diffraction measurements of residual stress distribution in large zirconia based refractory bricks produced by electro-fusion and casting. Journal of the European Ceramic Society, 37(5), 2295-2302. (sam) (hal)
  63. Peyre, P., Dal, M., Pouzet, S., & Castelnau, O. (2017). Simplified numerical model for the laser metal deposition additive manufacturing process. Journal of Laser Applications, 29(2) (sam) (hal)
  64. Perez, M., Guevelou, S., Abisset-Chavanne, E., Chinesta, F., & Keunings, R. (2017). From dilute to entangled fibre suspensions involved in the flow of reinforced polymers: A unified framework. Journal of Non-Newtonian Fluid Mechanics, 250, 8-17. (sam) (hal)
  65. Plancher, E.,  Favier, V.,   Maurice, C.,  Bosso, E., Rupin, N., Stodolna, J.,  Loisnard, D., Marijon, J.-B., Petit, J.,  Micha, J.-S.,  Robach, O., Castelnau, O. Direct measurement of local constitutive relations, at the micrometre scale, in bulk metallic alloys. Journal of Applied Crystallography, 50, 940-948. (sam) (hal)
  66. Phipps, C. R., Boustie, M., Chevalier, J. -., Baton, S., Brambrink, E., Berthe, L., Schneider, M., Videau, L., Boyer, S. A.E.,  Scharring, S. (2017). Laser impulse coupling measurements at 400 fs and 80 ps using the LULI facility at 1057 nm wavelength. Journal of Applied Physics, 122(19) (sam) (hal)
  67. Roggerone, V., Rébillat, M., & Corteel, É. (2017). Parallel hammerstein models identification using sine sweeps and the welch method. IFAC-PapersOnLine, 50(1), 14040-14045. (sam)
  68. Shirinbayan, M., Fitoussi, J., Meraghni, F., Surowiec, B., Laribi, M., & Tcharkhtchi, A. (2017). Coupled effect of loading frequency and amplitude on the fatigue behavior of advanced sheet molding compound (A-SMC). Journal of Reinforced Plastics and Composites, 36(4), 271-282. (sam)
  69. Shirinbayan, M., Fitoussi, J., Bocquet, M., Meraghni, F., Surowiec, B., & Tcharkhtchi, A. (2017). Multi-scale experimental investigation of the viscous nature of damage in advanced sheet molding compound (A-SMC) submitted to high strain rates. Composites Part B: Engineering, 115, 3-13. (sam) (hal)
  70. Shirinbayan, M., Fitoussi, J., Abbasnezhad, N., Meraghni, F., Surowiec, B., & Tcharkhtchi, A. (2017). Mechanical characterization of a low density sheet molding compound (LD-SMC): Multi-scale damage analysis and strain rate effect. Composites Part B: Engineering, 131, 8-20. (sam)
  71. Tomashchuk, I., Sallamand, P., Méasson, A., Cicala, E., Duband, M., & Peyre, P. (2017). Aluminum to titanium laser welding-brazing in V-shaped groove. Journal of Materials Processing Technology, 245, 24-36. (sam) (hal)
  72. Torabian, N., Favier, V., Dirrenberger, J., Adamski, F., Ziaei-Rad, S., & Ranc, N. (2017). Correlation of the high and very high cycle fatigue response of ferrite based steels with strain rate-temperature conditions. Acta Materialia, 134, 40-52. (sam) (hal)
  73. Touchard, F., Boustie, M., Chocinski-Arnault, L., González, P. P., Berthe, L., De Vasconcellos, D.,  Ostachowicz, W. (2017). Mechanical and laser impact effects on woven composites with hemp or glass fibres. International Journal of Structural Integrity, 8(3), 286-307.
  74. Toulemonde, P. -., Diani, J., Gilormini, P., Desgardin, N., & Nevière, R. (2017). Effects of small particles on the mechanical behavior and on the local damage of highly filled elastomers. Journal of Materials Science, 52(2), 878-888. (sam) (hal)
  75. Toulemonde, P., Diani, J., Gilormini, P., Desgardin, N., & Nevière, R. (2017). Propellant cohesive fracture during the peel test of a propellant/liner structure. Journal of Adhesion,1-10. (sam) (hal)
  76. Vo Van, O., Massat, J. -., & Balmes, E. (2017). Waves, modes and properties with a major impact on dynamic pantograph-catenary interaction. Journal of Sound and Vibration, 402, 51-69. (sam) (hal)
  77. Wang, Z.P., Poh, L.H., Dirrenberger, J., Forest, S. and Zhu, Y. (2017). Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization. Computational Methods in Applied Mechanics and Engineering, 323, 250-271. (sam) (hal)
  78. Zaffora, B., Magistris, M., Chevalier, J. -., Luccioni, C., Saporta, G., & Ulrici, L. (2017). A new approach to characterize very-low-level radioactive waste produced at hadron accelerators. Applied Radiation and Isotopes, 122, 141-147. (sam) (hal)
  79. Zaffora, B., Magistris, M., Saporta, M., Chevalier, J. (2017). Uncertainty quantification applied to the radiological characterization of radioactive waste.Applied Radiation and Isotopes, 127, 142-149. (sam) (hal)
  80. Zhao, Y., Le Joncour, L., Baczmański, A., Gadalińska, E., Wroński, S., Panicaud, B., Braham, C.,.  Buslaps, T. (2017). Stress distribution correlated with damage in duplex stainless steel studied by synchrotron diffraction during plastic necking. Materials and Design, 113, 157-168. (sam) (hal)
  81. Zhang, F. G., Bornert, M., Petit, J., & Castelnau, O. (2017). Accuracy of stress measurement by laue microdiffraction (laue-DIC method): The influence of image noise, calibration errors and spot number. Journal of Synchrotron Radiation, 24(4), 802-817. (sam) (hal)